I need help with Corrupted BIOS on T60p. I'm using Phoenix BIOS Crisis Recovery Tool, but I can't get it to work. Every site says that ThinkPad, if Pendrive is detected, should have fan's on 100% or at least Pendrive should flash light. Mine doesn't do that. What am I doing wrong?
I really appreciate any help!
Before you power up your partially functional T60p, you need to hold down Fn+F or Fn+B or Fn+R or Fn+K or Fn+Esc till your pen drive flashes (if it has a status LED). Then you can release your fingers off the keys, it should be doing the re-flashing process. This is assuming that your T60p is not beeping at boot-up, without the pen drive inserted.
EDIT: If I am not wrong, this needs a functional battery and must be connected to the AC adapter. Additionally, I recommend waiting for at least 20 seconds while holding down the key combination.
- Posts: 1648
- Joined: Thu Aug 09, 2012 3:08 pm
- Location: Calgary, Alberta, Canada
- Junior Member
- Posts: 309
- Joined: Sat Jun 30, 2012 6:25 pm
- Location: Bradford, West Yorkshire, England
W520 (C2Q i7-2720QM, 8GB, 60GB SSD)
X61 (C2D T7500, 3GB, 250GB SSD, BCM70015)
X61s (2GB, 120GB SSD)
T43p (P M 760, 2GB, IBM Port Replicator II)
G41 (P4 3.46GHz, 2GB, 40GB)
- Senior Member
- Posts: 809
- Joined: Fri Oct 17, 2014 8:13 pm
- Location: kingston, ontario, Canada
What memory module now working is what make of memory maker?
- Similar Topics
- Last post
Who is online
Users browsing this forum: zod and 18 guests