Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

My T60/T61 lego affaire

T60/T61 series specific matters only
Message
Author
Screamer
Junior Member
Junior Member
Posts: 445
Joined: Sun Apr 15, 2018 7:15 am
Location: Singapore

Re: My T60/T61 lego affaire

#31 Post by Screamer » Sat May 04, 2019 4:55 am

TinkerMan wrote:
Fri May 03, 2019 2:32 pm
ok , so after looking on the internet to a loooot of photos of T60 mobos I came upon this weirdo, by the looks is the thing that the guy in the video talks about
in his video he talks as if the T61 also would have one, but, mine did not have one, and I doubt the T60 will have one either, but I still didnt disassembled the T60 yet, so I cant tell for sure.
I believe that is an interposer card, that was used to extend the Ultrabay's connectors for the 15" 4:3 T60's motherboard (since its housing case was slightly bigger than its 14.1" variant). The other models, such as the 14.1" 4:3 and the 15.4" 16:10 T60, do not have this interposer installed.

As far as I know, the 4:3 and 16:10 T61 never had this interposer installed either.
TinkerMan wrote:
Fri May 03, 2019 2:11 pm
question, I saw on a video on youtube that I need to detach a portion of it in order to attach a portion of the T60 mobo, the part towards he ultrabay
how da heck am I supposed to do that?\ without ruining the entire mobo?
He meant to detach the interposer from the 15" 4:3 T60's motherboard, and then attach it to the 14.1" 4:3 T61's motherboard.

Also, could you please convert these images into links? They are far too big, and they are also above the stated 50KB limit which the forum's rules had mentioned.
TinkerMan wrote:
Fri May 03, 2019 8:40 am
regarding the cooling for a t601 F, which of the cooling system works best?
FRU 42W2820, or 42X4685, or 42W2028, for the models that are equipped with a dedicated graphics chip. FRU 42W2823, or 42W2821, or 42W2029, for the models that are equipped with an integrated graphics chip.
TinkerMan wrote:
Fri May 03, 2019 8:40 am
I also heard some people use the cooling system from a T500, is that valid?
Yes, but I don't recommend it. The only advantage that you would get from using a T500's heatsink assembly, is a faster-spinning fan that is slightly quieter than the T61's fan.

The disadvantage however, is that the T500's heatsink assembly does not properly sit onto the T60's graphics chip. If I can recall, the T60 has a graphics chip that is slightly taller than the graphics chip used in the T500, which means an uneven or improper contact. The solution to this, would be to bend the T500's heatsink assembly till it makes proper contact with the graphics chip.

This is the reason why I do not recommend installing the T500's heatsink assembly.
TinkerMan wrote:
Fri May 03, 2019 8:40 am
also, the heat-pipes and fan must both come from the same system or can the heat-pipes come from T61 and the fan from T60?

I am asking all this because I cant find a step by step guide on how to create a frankenpad, despite many people having one, it seems everybody likes to post about their creation but not explain in detail on how to do it, so I am picking up bits and pieces everywhere
You cannot remove the heatpipes from the T61's heatsink assembly, unless you have a machine that can remove the adhesive used to glue the heatpipes and the heatsink together. This is also assuming that the machine does not damage the heatpipes, since they are likely to be very fragile.

If you were to utilize the T60's fan and combine it with the T61's heatsink assembly, I would guess that you would get a very undesirable heatsink. This is due to the T60's fan, which produces less airflow as compared to the T61's fan. The other thing to note is the T60's fan noise, that is also much louder than the T61's fan noise. In any case, don't do that.
TinkerMan wrote:
Fri May 03, 2019 9:18 am
darn, I am facing the same dilemma since I saw a lot of fans on ebay, all say they are for T61 , but they look different
Well, there are different T61 models that require a different heatsink assembly. That is the reason why they all look so different.

The most important thing that you should be aware of, is that any heatsink assembly that is meant for the 14.1" 16:10 T61, is incompatible with the 14.1" 4:3 or 15" 4:3 T60. The only heatsink assemblies that would fit in without an issue, are the heatsink assemblies meant for the 15.4" 16:10 T61 or the 14.1" 4:3 T61.
Last edited by Screamer on Sat May 04, 2019 7:49 am, edited 1 time in total.

TinkerMan
Freshman Member
Posts: 60
Joined: Sun Jun 24, 2018 4:02 am
Location: Paris, France

Re: My T60/T61 lego affaire

#32 Post by TinkerMan » Sat May 04, 2019 5:40 am

thanks alot dude, all great tips, now I get a better understanding of the process. hat tip to you
Hall of glory: T43p
Retired: R61i
The nutcracker: T430s
deployed SEALS team: W520
abused daily: W530, P71, X230
Mr. fancy pants: P1 (Xeon/P2000)
Lego projects: T60, T61, T601F
on ice: X201
The way of the future: X1 Yoga gen 4

TinkerMan
Freshman Member
Posts: 60
Joined: Sun Jun 24, 2018 4:02 am
Location: Paris, France

Re: My T60/T61 lego affaire

#33 Post by TinkerMan » Sun May 05, 2019 7:33 am

HE IS ALIVE, ALIVEEEEEEEEEE
my first Frankie is alive
I used an old cracked chassis T60 near the heat-sink, with the one T61 mobo which I wasnt sure it was working, see discussion above
since I have never attempted such a build before I thought that if I do something wrong at least it will be with subpar pieces, but even so I was successful.
I didnt even mod the chassis , i simply chose to not install the modem card, since the last time I used a wire to connect to internet more than a decade ago.
also, since the T61 heat-sink fan was dead I used the T60 one, so far so good ( I do have the X3100 , not the nVidia gpu )
right now when writing this I m installing win 7 , so far so good.
Last edited by TinkerMan on Sun May 05, 2019 7:56 am, edited 1 time in total.
Hall of glory: T43p
Retired: R61i
The nutcracker: T430s
deployed SEALS team: W520
abused daily: W530, P71, X230
Mr. fancy pants: P1 (Xeon/P2000)
Lego projects: T60, T61, T601F
on ice: X201
The way of the future: X1 Yoga gen 4

TinkerMan
Freshman Member
Posts: 60
Joined: Sun Jun 24, 2018 4:02 am
Location: Paris, France

Re: My T60/T61 lego affaire

#34 Post by TinkerMan » Sun May 05, 2019 7:37 am

Image
Hall of glory: T43p
Retired: R61i
The nutcracker: T430s
deployed SEALS team: W520
abused daily: W530, P71, X230
Mr. fancy pants: P1 (Xeon/P2000)
Lego projects: T60, T61, T601F
on ice: X201
The way of the future: X1 Yoga gen 4

TinkerMan
Freshman Member
Posts: 60
Joined: Sun Jun 24, 2018 4:02 am
Location: Paris, France

Re: My T60/T61 lego affaire

#35 Post by TinkerMan » Tue May 07, 2019 2:49 am

Today will do the Middleton bios update, it will be my first time.

any precautions that should I take?
anyone has some real life advice before proceeding with this?

is it better to do this procedure while on win 7 32 bit or win 764 bit?
can I use an USB to flash the bios, or do I really need a CD/DVD drive?
Hall of glory: T43p
Retired: R61i
The nutcracker: T430s
deployed SEALS team: W520
abused daily: W530, P71, X230
Mr. fancy pants: P1 (Xeon/P2000)
Lego projects: T60, T61, T601F
on ice: X201
The way of the future: X1 Yoga gen 4

karimtaabo
Posts: 1
Joined: Wed May 15, 2019 5:31 pm
Location: ***

Re: My T60/T61 lego affaire

#36 Post by karimtaabo » Wed May 15, 2019 5:36 pm

TinkerMan wrote:
Tue May 07, 2019 2:49 am
Today will do the Middleton bios update, it will be my first time.

any precautions that should I take?
anyone has some real life advice before proceeding with this?

is it better to do this procedure while on win 7 32 bit or win 764 bit?
can I use an USB to flash the bios, or do I really need a CD/DVD drive?
does the T61 support PC2-6400 DDR2-800 200pin SODIMM or do I need precisely PC2 5300 ?

Ken Edmonds
Freshman Member
Posts: 89
Joined: Fri Jun 10, 2005 5:47 pm
Location: Chesterfield UK

Re: My T60/T61 lego affaire

#37 Post by Ken Edmonds » Wed May 15, 2019 5:46 pm

See post #10
T61, T60 x 3, T43, T42/T43, R51e, 600X, 570E x 2, 560X, 760C, 720C

Ken Edmonds
Freshman Member
Posts: 89
Joined: Fri Jun 10, 2005 5:47 pm
Location: Chesterfield UK

Re: My T60/T61 lego affaire

#38 Post by Ken Edmonds » Wed May 15, 2019 5:50 pm

TinkerMan wrote:
Fri May 03, 2019 9:18 am
Ken Edmonds wrote:
Fri May 03, 2019 9:07 am
I can't speak for frankenpads but the consensus seems to be that a T61 heatsink and fan is worth fitting to an ordinary T60 so I assume even more use in a frankenpad.
The problem is getting the right one. I've ordered one from two different places, admittedly both in Hong Kong and neither has been the part it was supposed to be.
I've now bought one for a T500 which does actually appear to be the correct part but I've not tried fitting it yet.
darn, I am facing the same dilemma since I saw a lot of fans on ebay, all say they are for T61 , but they look different

anyway, when do you think you will try to install the T500 one? I am anxious to see if thats the one to go with.
My mate who bought a T60 from the same place I did says he's fitted a T500/W500 heatsink and fan and although not perfect - a little high or tall - it fits and it's working.
T61, T60 x 3, T43, T42/T43, R51e, 600X, 570E x 2, 560X, 760C, 720C

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 14 guests