Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

How should I go about replacing a broken inverter?

Older ThinkPads.. from the 600, the 7xx, the iSeries, 300, 500, the Transnote and, of course, the 701
Post Reply
Message
Author
sly
Posts: 16
Joined: Sun Nov 10, 2019 3:17 pm
Location: Brovary, Ukraine

How should I go about replacing a broken inverter?

#1 Post by sly » Sun Nov 10, 2019 3:36 pm

Hi!

I'm new to the site, and I am not sure where to post this question.

I have recently got hold of a nice i-series 2611-552 Thinkpad. It works fine, except that the display doesn't have backlight. I've disassembled the screen and figured out that it was the inverter's fault. I did take it to a repair shop, and they told me it was indeed the inverter's fault. However, I can't find a replacement anywhere at all. I have been looking for 2 weeks now, and the only listings I found were scant and abroad, with the delivery fees that were way out of my league.

How should I go about this? I'd love to have it repaired, but the repair technician said he can't troubleshoot it because he doesn't have the schematics for the inverter. I couldn't find any of those online either. I found that this same inverter was present in some Acer Travelmate model seemingly, but I couldn't find anything searching for it either.

I found some "universal" inverters that have 4 soldering pads, though my inverter connects to an 8 pin ribbon cable. I also found that the ribbon cable slot on the motherboard seems to look like the cable from my Dell, but that cable is too short. Should I just try to replace the whole thing? The screen, the inverter and the ribbon cable? Or is there nothing I can do?

Thank you in advance!

onespeedbiker
Sophomore Member
Posts: 140
Joined: Sun Jun 23, 2019 10:42 pm
Location: Santa Cruz, CA

Re: How should I go about replacing a broken inverter?

#2 Post by onespeedbiker » Sun Nov 10, 2019 4:46 pm

Try here. https://www.impactcomputers.com/ be advised if they don't have it in stock, they likely will not be able to get it in 3 to 5 days.

Edit: I checked and Impact does not list a i1552, but they do list a i1560. Since both models come with a 14.1" TFT display with 1024x768 resolution, I would think this inverter would be compatible. https://www.impactcomputers.com/10l1442.html

sly
Posts: 16
Joined: Sun Nov 10, 2019 3:17 pm
Location: Brovary, Ukraine

Re: How should I go about replacing a broken inverter?

#3 Post by sly » Mon Nov 11, 2019 2:15 am

Thank you for the suggestion! I'll keep an eye out for my model (T62.126.C.00). The other one you suggested has a different kind of connector it seems, so unless I replace the ribbon cable as well I doubt it will fit.

RealBlackStuff
Admin Emeritus
Admin Emeritus
Posts: 21004
Joined: Mon Sep 18, 2006 5:17 am
Location: Dublin, Éire
Contact:

Re: How should I go about replacing a broken inverter?

#4 Post by RealBlackStuff » Mon Nov 11, 2019 3:51 am

You are looking for this inverter with IBM FRU: 10L1383, a.k.a. T62.126.C.00
Get the i1400 HMM manual here: https://thinkpads.com/support/hmm/hmm_pdf/37l5192.pdf
Lovely day for a Guinness! (the Real Black Stuff). And pigs CAN fly!
Check out The Boardroom for Parts, Mods and Other Services.

"Computers don't lie, but liars can compute." (Terry Hayes's I Am Pilgrim)

sly
Posts: 16
Joined: Sun Nov 10, 2019 3:17 pm
Location: Brovary, Ukraine

Re: How should I go about replacing a broken inverter?

#5 Post by sly » Mon Nov 11, 2019 5:26 am

Thank you very much! I'll look around for it again with that number.

sly
Posts: 16
Joined: Sun Nov 10, 2019 3:17 pm
Location: Brovary, Ukraine

Re: How should I go about replacing a broken inverter?

#6 Post by sly » Tue Nov 12, 2019 2:27 am

I found an inverter for sale on a website with free worldwide shipping. I've ordered it and it should be here in a month or so. Thanks again for the help!

iamdmc
Senior Member
Senior Member
Posts: 689
Joined: Fri Sep 21, 2007 11:37 pm
Location: Downtown Toronto, Canada

Re: How should I go about replacing a broken inverter?

#7 Post by iamdmc » Thu Mar 12, 2020 9:47 am

sly wrote:
Tue Nov 12, 2019 2:27 am
I found an inverter for sale on a website with free worldwide shipping. I've ordered it and it should be here in a month or so. Thanks again for the help!
did it arrive and work? I have an X61s where I thought the inverter board blew out, but when I replaced it the backlight still wouldn't turn on. Turns out that it's a fuse on the motherboard that blew, and I might eventually dig the soldering iron out to replace it. For now the mobo's a spare part, which I replaced with another one
ThinkPad T480s
i7-8550u | 16+8GB RAM | 500GB Samsung 970 2280 M.2 M-key PCIe x4 | FHDtoQHD upgrade | 2242 M.2 B-key PCIe x2 @WWAN slot | Intel AX200

The X61 is dead... long live the X61

Past IBM ThinkPads: T450s, X250, X230, X220, X300, T410, X61s, T60p, T41, X31, T23, A21m

sly
Posts: 16
Joined: Sun Nov 10, 2019 3:17 pm
Location: Brovary, Ukraine

Re: How should I go about replacing a broken inverter?

#8 Post by sly » Thu Mar 12, 2020 2:30 pm

iamdmc wrote:
Thu Mar 12, 2020 9:47 am
sly wrote:
Tue Nov 12, 2019 2:27 am
I found an inverter for sale on a website with free worldwide shipping. I've ordered it and it should be here in a month or so. Thanks again for the help!
did it arrive and work? I have an X61s where I thought the inverter board blew out, but when I replaced it the backlight still wouldn't turn on. Turns out that it's a fuse on the motherboard that blew, and I might eventually dig the soldering iron out to replace it. For now the mobo's a spare part, which I replaced with another one
I received the inverter but it indeed did not help. I think I have the same issue as you, if you could, would you please let me know which part to replace? I'd love to try it on my machine, I still have it lying around! Don't have any spare motherboards here, it appears this particular model is not common in my country.

iamdmc
Senior Member
Senior Member
Posts: 689
Joined: Fri Sep 21, 2007 11:37 pm
Location: Downtown Toronto, Canada

Re: How should I go about replacing a broken inverter?

#9 Post by iamdmc » Thu Mar 12, 2020 5:01 pm

sly wrote:
Thu Mar 12, 2020 2:30 pm
iamdmc wrote:
Thu Mar 12, 2020 9:47 am


did it arrive and work? I have an X61s where I thought the inverter board blew out, but when I replaced it the backlight still wouldn't turn on. Turns out that it's a fuse on the motherboard that blew, and I might eventually dig the soldering iron out to replace it. For now the mobo's a spare part, which I replaced with another one
I received the inverter but it indeed did not help. I think I have the same issue as you, if you could, would you please let me know which part to replace? I'd love to try it on my machine, I still have it lying around! Don't have any spare motherboards here, it appears this particular model is not common in my country.
Check this out: https://forums.lenovo.com/t5/ThinkPad-X ... td-p/73067
"Problem solved. If anyone lands up with the same problem, it is fuse F2 that needs to be replaced. It is to the left of the LCD cable on the motherboard." - check the link and email that user as he has photos he can share (although the post is from 2008!)

a more detailed guide here https://blogs.gnome.org/muelli/2012/04/ ... en-a-fuse/

Good luck! Post if you were successful :)
ThinkPad T480s
i7-8550u | 16+8GB RAM | 500GB Samsung 970 2280 M.2 M-key PCIe x4 | FHDtoQHD upgrade | 2242 M.2 B-key PCIe x2 @WWAN slot | Intel AX200

The X61 is dead... long live the X61

Past IBM ThinkPads: T450s, X250, X230, X220, X300, T410, X61s, T60p, T41, X31, T23, A21m

sly
Posts: 16
Joined: Sun Nov 10, 2019 3:17 pm
Location: Brovary, Ukraine

Re: How should I go about replacing a broken inverter?

#10 Post by sly » Thu Mar 12, 2020 5:42 pm

iamdmc wrote:
Thu Mar 12, 2020 5:01 pm
sly wrote:
Thu Mar 12, 2020 2:30 pm


I received the inverter but it indeed did not help. I think I have the same issue as you, if you could, would you please let me know which part to replace? I'd love to try it on my machine, I still have it lying around! Don't have any spare motherboards here, it appears this particular model is not common in my country.
Check this out: https://forums.lenovo.com/t5/ThinkPad-X ... td-p/73067
"Problem solved. If anyone lands up with the same problem, it is fuse F2 that needs to be replaced. It is to the left of the LCD cable on the motherboard." - check the link and email that user as he has photos he can share (although the post is from 2008!)

a more detailed guide here https://blogs.gnome.org/muelli/2012/04/ ... en-a-fuse/

Good luck! Post if you were successful :)
Thank you very much! I'll try this as soon as I can and will get back with the results!

RealBlackStuff
Admin Emeritus
Admin Emeritus
Posts: 21004
Joined: Mon Sep 18, 2006 5:17 am
Location: Dublin, Éire
Contact:

Re: How should I go about replacing a broken inverter?

#11 Post by RealBlackStuff » Fri Mar 13, 2020 2:14 am

Rather than replace, solder the new fuse piggyback style on top of the old one.
Lovely day for a Guinness! (the Real Black Stuff). And pigs CAN fly!
Check out The Boardroom for Parts, Mods and Other Services.

"Computers don't lie, but liars can compute." (Terry Hayes's I Am Pilgrim)

sly
Posts: 16
Joined: Sun Nov 10, 2019 3:17 pm
Location: Brovary, Ukraine

Re: How should I go about replacing a broken inverter?

#12 Post by sly » Fri Mar 13, 2020 5:27 am

RealBlackStuff wrote:
Fri Mar 13, 2020 2:14 am
Rather than replace, solder the new fuse piggyback style on top of the old one.
Thanks for the tip!

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad Legacy Hardware”

Who is online

Users browsing this forum: No registered users and 21 guests