A first post about my new X61, a worse intro than I would have hoped
I tried to remove the wifi card from mPCIe socket (the socket supprting mPCIe ?) and just stripped the screws.
Before destroying everything or putting metal chips everywhere, I'm asking for help on how to remove this card ?
On solution would be to break the corner of the card and all around the hole to get enough space to use a small plier to turn the screws. but If I can skip the destructive phase it may be better.
Any idea ?
Thanks a lot
the picture :
600 PII-266 416mb 40gb WXP
T23 PIII 1.13ghz 1gb W7
Lat D830 X9000 8gb 160gb WUXGA Ultrasharp fp W10
T530i 15.6" i7 16gb fp W10
A30p PIII 1.2 1gb W7 (IDTech)
T43p 2.26 2gb fp W10 (Sharp)
Lat C840 P4-2.5 2gb 60gb W7 (Ultrasharp)
1- Stripped screws removal should be easy as it is wide open area once the palmrest is removed, use small long nose pliers to grip screws.
2- If the bottom holes are destoyed, use a small flathead screw driver under the screws forcing it towards you and use the long line pliers to prevent it turning empty.
Spare wheel : T440p, i7-4700mq, 1080p lg panel, 16 gb, 500gb 860 evo, intel 4600 gpu
My Thinkpads at the moment
T61 Nvs140m, T42P UXGA, T43 14.1" X300, T43 14.1" gma900, X60s, X61 T8300, X32, T23..
- Admin Emeritus
- Posts: 21597
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Dublin, Éire
Get a Dremel with a cutting disc like this: http://www.ebay.com/itm/233584743986
Cut a small groove in the screw (not all the way through!).
Then use a straight screwdriver to remove the screw.
Make sure to tape off the surroundings to avoid metal dust flying into the laptop.
See also this: /viewtopic.php?f=2&t=81377
Ireland is on FULL lockdown till December 2020!
Covid-19: Mask it or Casket!
Check out The Boardroom for Mods and Other Services.
The screws are soft aluminum with a very shallow head that is very easy to strip as you found out.
T43p 2669-Q1U, A22p's UTU A21p HXU
Transnote, 770's 8AU, 600, 701CS, 755CD
- Similar Topics
- Last post
Who is online
Users browsing this forum: No registered users and 44 guests