T42: Upgrading 1.7 735 To 2.0 755...

T4x series specific matters only
Post Reply
Message
Author
adamlau
Posts: 10
Joined: Wed Sep 28, 2005 7:58 pm

T42: Upgrading 1.7 735 To 2.0 755...

#1 Post by adamlau » Thu Sep 29, 2005 2:21 am

AFAIK, the swap involves unscrewing the bottom away from the top, removing keyboard, removing OEM CPU, thermal compounding new CPU in, and replacing keybaord and housing. Anything I may have missed? Comments, recommendations, suggestions before I start?

hoya
Senior Member
Senior Member
Posts: 670
Joined: Fri Aug 05, 2005 8:01 pm
Location: Washington, DC

#2 Post by hoya » Thu Sep 29, 2005 1:40 pm

question: is it really worth the trouble? IMHO, a 7200rpm hard drive will offer a MUCH more noticeable improvement in speed (and won't void your warranty in the process). of course, I'm assuming you've already upgraded the RAM to at least 1 gig, etc.

adamlau
Posts: 10
Joined: Wed Sep 28, 2005 7:58 pm

#3 Post by adamlau » Thu Sep 29, 2005 9:25 pm

Indeed I have. Next option is to swap out the CPU. Looking for tips and hints...Suggestions?
_________________
IBM T42 2378-FZU
Intel Pentium M 755 2.0 GHz (soon!)
2048 MB Corsair System Select
High Capacity Li-Ion Battery
Hitachi Travelstar 7K60

freddy418
Freshman Member
Posts: 94
Joined: Tue Jun 14, 2005 10:19 am
Location: NY
Contact:

#4 Post by freddy418 » Thu Sep 29, 2005 9:56 pm

I have gone in there before, and it's really a piece of cake swapping the CPU. I went from a 735 to a 755 as well, and strangely enough though, the laptop feels peppier on the lowest clock settings and just gets hotter than before on the highest clock settings. For me it was a win-win situation upgrading the cpu, it was a good learning experience and it only cost me 50 dollars to upgrade to a secondhand 755. But either way though, good luck to ya and hope you learn something from the experience.
IBM ThinkPad T61P (8891-CTO)
P-M C2D T9300 2.5 GHz, 15" Flexview UXGA, Quadro FX 570M 128MB, Hitachi 7K200 200GB SATA HDD, 2GB PC2-5300, WinXP Pro - SP2

References:
Heatware: freddy418
Ebay: freddybobman

Hans Gruber
Senior Member
Senior Member
Posts: 778
Joined: Thu Sep 29, 2005 6:18 am
Location: Seattle, WA

#5 Post by Hans Gruber » Thu Sep 29, 2005 11:31 pm

The best thermal compound for CPU's is Arctic Silver 5. I use it on all of my desktops. You wouldn't think different thermal compounds make much of a difference, but they do. Arctic Silver makes the thermal paste.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T4x Series”

Who is online

Users browsing this forum: No registered users and 2 guests