What motherboard for model x 600E (mmc1 or mmc2?)

[kocoman]

Is it possible to know if a 600E has MMC1 or MMC2 by using the model number? Thanks

[GomJabbar]

The 600E uses the MMC-2 processor card.

CPU Card (Dixon 300 MHz, AGP) 10L1277
CPU Card (Dixon 366 MHz, AGP) 10L1260
CPU Card (Dixon 400 MHz, AGP) 10L1333

--------------------------------------------------
The 600 uses the MMC-1 processor card.

CPU Card (MMX 233 MHz) 12J0408
CPU Card (Pentium II 233 MHz) 10L0888
CPU Card (Pentium II 266 MHz) 10L0887
CPU Card (Pentium II 300 MHz) 10L1020

[kocoman]

ok thanks so does all 600E have TV out card? how to know which one have TV out and which one doesn't. Thanks

[GomJabbar]

Some do, some don't. I had a 600E that didn't, but I added one. If you are interested, you need to get TV Out card 10L1192, and Video cable 05K2821.

The opening is on the right side of the base, near the front. If you don't have the TV Out card, you will see a plug in the small round hole. To install the card you have to remove the keyboard, and a plastic insert. Plug in the card, and trim the insert so that it will fit. Be carefull with the ribbon connectors for the keyboard and also for the speakers (2 connectors total). Also be careful when replacing the keyboard, because it is easy to damage the ribbon cable connector for the speakers with the LED plastic inserts in the keyboard top bezel. The following manual should prove useful.

Hardware Maintenance Manual 600 and 600E

[kocoman]

Thanks. I found it after I remove the screw holding the ultrabay.