Anybody got an idea what's is wrong
T23 "Thinpad button" not working
T23 "Thinpad button" not working
I've just bought a T23 on ebay (model 2647-LU3) and I upgraded the OS from Windows 2000 to XP. After dowloading all the drivers and utilities, from IBM, I can't get the "thinkpad button" to work, it used to work fine in W2K.
Anybody got an idea what's is wrong
Anybody got an idea what's is wrong
You probably damaged the boot sector when you installed XP. You can try the following solution. Hopefully it will work for you. I have not tried this myself.
Rescue and Recovery - Recovery repair diskette
Rescue and Recovery - Recovery repair diskette
DKB
In order to get the button to work certain drivers/utilities have to be installed in a specific order. See this link:
http://www-307.ibm.com/pc/support/site. ... MIGR-41811
for the process. Some other utilities also have prereqisites.
The only utility that has to be running for the Thinkpad button to work is the Hot Key Utility so before you reinstall, check that.
http://www-307.ibm.com/pc/support/site. ... MIGR-41811
for the process. Some other utilities also have prereqisites.
The only utility that has to be running for the Thinkpad button to work is the Hot Key Utility so before you reinstall, check that.
I used to be an anarchist but I quit because there were too many rules
Since the Access IBM button serves (2) very different functions, depending upon your problem, you should use dsvochak's approach or one simular to mine (A reinstall of Rescue and Recovery may accomplish the same thing as the Recovery Repair diskette I mentioned previously).
If you are trying to bring up the Access IBM page from within Windows, use dsvochak's approach. If you are trying to access the Repair and Recovery workspace on boot up, try one of my solutions. (I don't think dsvochak's approach would affect accessing the Repair and Recovery workspace on boot up, but I could be wrong).
If you are trying to bring up the Access IBM page from within Windows, use dsvochak's approach. If you are trying to access the Repair and Recovery workspace on boot up, try one of my solutions. (I don't think dsvochak's approach would affect accessing the Repair and Recovery workspace on boot up, but I could be wrong).
DKB
Thanks that did the trick !dsvochak wrote:In order to get the button to work certain drivers/utilities have to be installed in a specific order. See this link:
http://www-307.ibm.com/pc/support/site. ... MIGR-41811
for the process. Some other utilities also have prereqisites.
The only utility that has to be running for the Thinkpad button to work is the Hot Key Utility so before you reinstall, check that.
Do you know where I could find a french version of this utility ?
Sort of. Go to the following page. http://www.ibm.com/fr/bossman74 wrote:Do you know where I could find a french version of this utility ?
In the Search Box at the top of the page, type the equivalent of "+Software +and +Device +Drivers - +ThinkPad +T22, +T23" without quotes, in the French language, and hit the Enter key. Sorry, I don't speak or write French.
Once you find the device driver page, click on the T22 link under Download individual drivers. It should be on one of the following pages.
DKB
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Ultranav not working. Help.
by Blender » Wed Jan 04, 2017 7:35 pm » in ThinkPad R, A, G and Z Series - 14 Replies
- 1818 Views
-
Last post by dr_st
Tue Jan 17, 2017 3:15 am
-
-
-
T450 - Brightness control hotkeys not working after system wake
by Czechnology » Tue Jan 10, 2017 9:05 am » in ThinkPad T430/T530 and later Series - 0 Replies
- 415 Views
-
Last post by Czechnology
Tue Jan 10, 2017 9:05 am
-
-
- 5 Replies
- 1509 Views
-
Last post by slaterlp
Sat Feb 04, 2017 10:32 am
-
-
Internal Speakers not working properly
by thangaraju » Tue Feb 07, 2017 11:00 pm » in ThinkPad T430/T530 and later Series - 1 Replies
- 357 Views
-
Last post by dr_st
Wed Feb 08, 2017 5:10 am
-
Who is online
Users browsing this forum: No registered users and 7 guests





