LCD molding is wack

X2/X3/X4x series specific matters only
Post Reply
Message
Author
amgdoc
Freshman Member
Posts: 106
Joined: Thu Oct 27, 2005 11:58 am

LCD molding is wack

#1 Post by amgdoc » Thu Jan 05, 2006 7:03 pm

the bottom of the LCD molding is bending out. you can put a penny in there, it is like a pouch. any ideas on how to close the gap? if not, anyone with part numbers for the molding? thank you!
thinkpad x40, type:2372-9EU, (2x) 512MB, 40GB HD (4200rpm), 802.11abg, CDC bluetooth

thinkpad x60s, type:1702-94U, (2X) 512MB, 40GB HD (5400rpm), 802.11abg, Ultralight LCD.
Top
Grey Area
Freshman Member
Posts: 76
Joined: Mon Sep 19, 2005 12:02 pm
Location: Koblenz, Germany

#2 Post by Grey Area » Thu Jan 05, 2006 7:47 pm

I guess you are talking about your X40? My X41 has the same problem, and others have reported similar things, so I doubt a new part would necessarily solve the problem. Maybe pour glue into the gap and apply pressure? :shock: :D
I think I´ll rather not bother and hope it won´t collect too much dust.

Björn
Top
amgdoc
Freshman Member
Posts: 106
Joined: Thu Oct 27, 2005 11:58 am

#3 Post by amgdoc » Sat Jan 07, 2006 2:10 pm

i unscrewed the bottom 2 screws on the bottom of the screen, it helped a little.
thinkpad x40, type:2372-9EU, (2x) 512MB, 40GB HD (4200rpm), 802.11abg, CDC bluetooth

thinkpad x60s, type:1702-94U, (2X) 512MB, 40GB HD (5400rpm), 802.11abg, Ultralight LCD.
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad X2/X3/X4x Series incl. X41 Tablet”

Who is online

Users browsing this forum: No registered users and 3 guests