POLL: Is your 14" display is a Samsung or IDTECH?

Message

edelrc · #31 Post by **edelrc** » Fri Jul 16, 2004 5:06 pm

The blacks in those Sonys with XBrite technology are a little darker, but that can be because their screen are usually glosy. IBM's screen are matte, so not shaining. However, Flexview have, with a lot of difference, deeper blacks (and any color) than any other tipical screen.

The refresh rate (check here:http://www.monitorsdirect.com/toolkit/index.shtml, however is noticiable, but that it is no concern unless you do gaming frequently.

g79 · #32 Post by **g79** » Sat Jul 17, 2004 7:43 am

x DrMarco, nowstime:

I have a T41 2379DJU and the lcd is listed as:
Mfg part # 93P5571, FRU part # 0000000

I had the screen replaced by an IBM authorized repair center here in Italy (it had exactly the same problem as the one described by K. Eng a few posts above. More info here:
http://forum.thinkpads.com/viewtopic.php?t=1690) and I explicitly asked for a Samsung (part 11P8348) beacause it seems that Samsung's are better than IDTech's.

When I went back to get the unit 4 days later the guy that actually did the work told me the original one was already a Samsung.

So I guess Mfg part # 93P5571 means Samsung.

g79

dragius · #33 Post by **dragius** » Mon Jul 19, 2004 9:05 am

MFG92P6689 FPU0000000

2373KA T41

doylnea · #34 Post by **doylnea** » Sun Aug 22, 2004 12:06 pm

MFG # FRU # Description
92P6725 92P6726 LCD MODULE 14.1 XGA LG FRU

No idea what correllates with what, but my display is bright, clean and has no dead pixels.

Spectra · #35 Post by **Spectra** » Sun Aug 22, 2004 2:11 pm

I have an XGA LG.Philips LCD too, FRU:92P6726. Very nice saturation, no light leaks, brightness is even. Viewing angles are large too. 160 degrees horizontally, 60 vertically.

doylnea · #36 Post by **doylnea** » Sun Aug 22, 2004 7:14 pm

Spectra wrote:I have an XGA LG.Philips LCD too, FRU:92P6726. Very nice saturation, no light leaks, brightness is even. Viewing angles are large too. 160 degrees horizontally, 60 vertically.

The 92P6726 is a Phillips? That's a pretty good LCD I believe - that makes me happy.

clmbngbkng · #37 Post by **clmbngbkng** » Mon Aug 23, 2004 10:38 am

Whats the difference between the two? Is one better than the other?

I have a 2373KTU and it has an IDtech one also I've had it for under a month.

bioyuki · #38 Post by **bioyuki** » Mon Aug 23, 2004 3:43 pm

My 2373-3VU has the Samsung LCD.

fireracer7 · #39 Post by **fireracer7** » Mon Aug 23, 2004 3:44 pm

Mine has the Samsung LCD.

hominoidea · #40 Post by **hominoidea** » Mon Aug 23, 2004 3:48 pm

Mfg part #92P6690
FRU part #0000000

?

aphex · #41 Post by **aphex** » Mon Aug 23, 2004 6:02 pm

nowstime wrote:Mine is 93P5571 (part #)

Which one is mine? the FRU part # says 0000000

My T41 2379-DJU shows the same.... Anyone know who makes it?

admsteiner · #42 Post by **admsteiner** » Mon Aug 23, 2004 6:06 pm

2378-FVU with a Samsung screen (14.1) works like a charm. Love it.

--Adam

boardmonger · #43 Post by **boardmonger** » Tue Aug 24, 2004 11:50 am

bioyuki wrote:My 2373-3VU has the Samsung LCD.

ME TOO!

DrMarco · #44 Post by **DrMarco** » Tue Aug 24, 2004 3:55 pm

aphex wrote:
nowstime wrote:Mine is 93P5571 (part #)

Which one is mine? the FRU part # says 0000000
My T41 2379-DJU shows the same.... Anyone know who makes it?

According to the message above by g79, that would be a Samsung.

What do you think of your screen? (I have the same).

DaveH · #45 Post by **DaveH** » Wed Aug 25, 2004 8:29 am

2378-FVU 14" Samsung... looks great to me, except one dead pixel on the bottom.

SkiBunny · #46 Post by **SkiBunny** » Tue Jul 24, 2007 7:41 pm

JHEM wrote:
K. Eng wrote:My LCD is listed as Mfg part # 11P8356, but I cannot find this anywhere in the HMM.
That's the same display as mine Brian, machine is a 2373-8CU.

I'm quite happy with it BTW.

Regards,

James

So does anyone know what type of display this 11P8350 is?

sugo · #47 Post by **sugo** » Tue Jul 24, 2007 9:12 pm

SkiBunny wrote: So does anyone know what type of display this 11P8350 is?

IDTech XGA.

TOMSrolla · #48 Post by **TOMSrolla** » Wed Jul 25, 2007 12:10 am

Mine is IDTECH 11P8346 SXGA+ ...... T41p 2373-GEM date - 03/12

no dead pixel at all

Oraklini · #49 Post by **Oraklini** » Wed Jul 25, 2007 6:38 pm

Samsung...in good order

SHoTTa35 · #50 Post by **SHoTTa35** » Wed Jul 25, 2007 8:31 pm

what tha, you gotta use capitlization? I was there typing this thing in like crazy (the detect thing came back as "UNKN-OWN" ) LOL

92P6736 92P6737

Hmm, did a google search and came back with 1 page that has that number:

92P6736 92P6737 LCD PANEL14.1 SXGA+ HYDIS

The screen i have is SXGA+ and apparently it is Hydis? That's really weird.

I remember checking some other IBM page about it and it also stated IPS but i'm guessing that's a typo.

POLL: Is your 14" display is a Samsung or IDTECH?

same here

Who is online