T40/41/42 system board

T4x series specific matters only
Post Reply
Message
Author
ajsimeon
Freshman Member
Posts: 93
Joined: Sat Jan 21, 2006 11:19 am
Location: Raleigh, NC

T40/41/42 system board

#1 Post by ajsimeon » Tue Jan 31, 2006 12:33 am

Are they the same? Somebody on ebay is selling IBM T40/1/2/2P System board w/ Security Chip - 91P7998. Just wondering if I could fit a T41 or T42 system board in my T40? Thanks!

ajsimeon
Freshman Member
Posts: 93
Joined: Sat Jan 21, 2006 11:19 am
Location: Raleigh, NC

#2 Post by ajsimeon » Tue Jan 31, 2006 9:24 am

anyone? do they all have the same chasis?

draco2527
Senior Member
Senior Member
Posts: 707
Joined: Tue Mar 29, 2005 12:41 am
Location: Sterling Heights, Michigan

#3 Post by draco2527 » Tue Jan 31, 2006 11:43 am

Yes!

The older T41's came with the security chip embeded on the motherboard, the "newer" T41 and up motherboards have a removable security chip. The T40 never had the sock-sensor, so you will get the benefit of this!

The only draw back, if you try to install updates (bios) that relate to the T40; they will not work. (so you have to remember what model it came out of.

My T41 suffered a spill, I got a T42 motherboard; that is what I have on it now.

Again, it is possible on the T40; but you will have some issues (bios, etc)
X220T Multi-touch
T410
X61T (pen)
X61T X2 (pen/touch) 1-WIN7 1-WIN8
T61

draco2527
Senior Member
Senior Member
Posts: 707
Joined: Tue Mar 29, 2005 12:41 am
Location: Sterling Heights, Michigan

#4 Post by draco2527 » Tue Jan 31, 2006 11:44 am

I FORGOT TO MENTION----DO NOT buy a motherboard that has no security chip attached, if at one point there was one there; and it has been removed, the motherboard WILL NOT work!

If someone sells one from a working system and they pull the security chip out and they do not included; you are SOL! It will not work....
X220T Multi-touch
T410
X61T (pen)
X61T X2 (pen/touch) 1-WIN7 1-WIN8
T61

rssb
Junior Member
Junior Member
Posts: 476
Joined: Tue Dec 14, 2004 4:35 pm
Location: Richmond,VA

#5 Post by rssb » Tue Jan 31, 2006 2:44 pm

All of them { T40/T41/T42 and p versions } have the same bios file. But the internal chips vary, 41 and 42 can support DDR 333 where as 40 has only 266. Some in 42 have fingerprint support. You should not have any problems when you change the board due to bios or any of the hardware on it, as long as the board is a good functional one ( i.e no bad security chips etc.. )

ajsimeon
Freshman Member
Posts: 93
Joined: Sat Jan 21, 2006 11:19 am
Location: Raleigh, NC

#6 Post by ajsimeon » Tue Jan 31, 2006 3:29 pm

wonderful to know...that means by the time windows vista comes out and my warranty is up i could switch a t42 board that has a vista ready video card on it. hopefully the prices will be down even more by then.

draco2527
Senior Member
Senior Member
Posts: 707
Joined: Tue Mar 29, 2005 12:41 am
Location: Sterling Heights, Michigan

#7 Post by draco2527 » Tue Jan 31, 2006 11:59 pm

[quote="rssb"]All of them { T40/T41/T42 and p versions } have the same bios file. quote]

I guess I got them confused with the T20/22/23 series, those had different Bios files!!!
X220T Multi-touch
T410
X61T (pen)
X61T X2 (pen/touch) 1-WIN7 1-WIN8
T61

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T4x Series”

Who is online

Users browsing this forum: No registered users and 3 guests