512mb PC133 and X22 - questions
512mb PC133 and X22 - questions
Hey,
I read the X22 could support 640 mb of ram (128+512) so I purchased a 512meg stick of memory (SODIMM PC133 144pin) and added it to the system. Turning the computer on results on system beeps and not booting.
What can I do? Will upgrading the bios work? A setting in the bios? Why doesn't this work. I know the X22 is PC133 and supports 640 so why doesn't it work? With 128mb installed with the system, and a total possible 640mb supported, and only one other slot, there's no other possible combination than 512+128 so obviously 512mb sticks are supported! Right?
At the very least, could I somehow remove the keyboard and access the primary memory slot to install the 512mb stick there? And have only 512mb of ram?
Thanks a lot
I read the X22 could support 640 mb of ram (128+512) so I purchased a 512meg stick of memory (SODIMM PC133 144pin) and added it to the system. Turning the computer on results on system beeps and not booting.
What can I do? Will upgrading the bios work? A setting in the bios? Why doesn't this work. I know the X22 is PC133 and supports 640 so why doesn't it work? With 128mb installed with the system, and a total possible 640mb supported, and only one other slot, there's no other possible combination than 512+128 so obviously 512mb sticks are supported! Right?
At the very least, could I somehow remove the keyboard and access the primary memory slot to install the 512mb stick there? And have only 512mb of ram?
Thanks a lot
Is it hight density RAM stick or low density RAM stick? Low density is 8 chips on each side of the stick, and high is only 4 chips on each side.
I've tried 8 chips on a side and it does the same thing as what happened to you. Fortunately, it was 512MB ram that a friend gave me for free.
If you read the other thread I bumped up recently in this forum, there's a reference to the X22 using high density RAM.
I ordered high density ram, and it should arrive in a couple of days.
I've tried 8 chips on a side and it does the same thing as what happened to you. Fortunately, it was 512MB ram that a friend gave me for free.
If you read the other thread I bumped up recently in this forum, there's a reference to the X22 using high density RAM.
I ordered high density ram, and it should arrive in a couple of days.
X22 - 800mhz - 640MB RAM - 60GB Hitachi 7200rpm 7k100
X40 - 1.4ghz - 1.5GB RAM - 8GB Transcend 300x CF on Addonics CF/IDE Adapter
T42p - 1.8ghz - 15" UXGA - 1GB RAM - 160GB HDD
X61t - C2D 1.6ghz - 12.1" SXGA+ - 8GB RAM - Intel G3 300GB SSD
X40 - 1.4ghz - 1.5GB RAM - 8GB Transcend 300x CF on Addonics CF/IDE Adapter
T42p - 1.8ghz - 15" UXGA - 1GB RAM - 160GB HDD
X61t - C2D 1.6ghz - 12.1" SXGA+ - 8GB RAM - Intel G3 300GB SSD
Weird. I'm just stating what I know based on the other thread in this forum.
However, I'll be receiving my 512MB RAM tomorrow. I'll let you know how that goes.
However, I'll be receiving my 512MB RAM tomorrow. I'll let you know how that goes.
X22 - 800mhz - 640MB RAM - 60GB Hitachi 7200rpm 7k100
X40 - 1.4ghz - 1.5GB RAM - 8GB Transcend 300x CF on Addonics CF/IDE Adapter
T42p - 1.8ghz - 15" UXGA - 1GB RAM - 160GB HDD
X61t - C2D 1.6ghz - 12.1" SXGA+ - 8GB RAM - Intel G3 300GB SSD
X40 - 1.4ghz - 1.5GB RAM - 8GB Transcend 300x CF on Addonics CF/IDE Adapter
T42p - 1.8ghz - 15" UXGA - 1GB RAM - 160GB HDD
X61t - C2D 1.6ghz - 12.1" SXGA+ - 8GB RAM - Intel G3 300GB SSD
I got my information from this thread: http://forum.thinkpads.com/viewtopic.php?t=12074
X22 - 800mhz - 640MB RAM - 60GB Hitachi 7200rpm 7k100
X40 - 1.4ghz - 1.5GB RAM - 8GB Transcend 300x CF on Addonics CF/IDE Adapter
T42p - 1.8ghz - 15" UXGA - 1GB RAM - 160GB HDD
X61t - C2D 1.6ghz - 12.1" SXGA+ - 8GB RAM - Intel G3 300GB SSD
X40 - 1.4ghz - 1.5GB RAM - 8GB Transcend 300x CF on Addonics CF/IDE Adapter
T42p - 1.8ghz - 15" UXGA - 1GB RAM - 160GB HDD
X61t - C2D 1.6ghz - 12.1" SXGA+ - 8GB RAM - Intel G3 300GB SSD
-
vincentfox
- Freshman Member
- Posts: 106
- Joined: Tue Dec 13, 2005 7:14 pm
I have an X22 with 640 megs RAM.
The SODIMM I have, has 8 chips per side for 16 total. Actually it has this odd configuration with 6 chips in a row, and 2 of them stuck up top like an afterthough. I think I got it from TigerDirect but I didn't really pay any attention to low/high at the time, just plugged it in and it worked.
The SODIMM I have, has 8 chips per side for 16 total. Actually it has this odd configuration with 6 chips in a row, and 2 of them stuck up top like an afterthough. I think I got it from TigerDirect but I didn't really pay any attention to low/high at the time, just plugged it in and it worked.
What Type is your X22, 2662-????. I had the same 512MB RAM chip config as yours, 6 lined up and 2 on top, but it didn't boot.
X22 - 800mhz - 640MB RAM - 60GB Hitachi 7200rpm 7k100
X40 - 1.4ghz - 1.5GB RAM - 8GB Transcend 300x CF on Addonics CF/IDE Adapter
T42p - 1.8ghz - 15" UXGA - 1GB RAM - 160GB HDD
X61t - C2D 1.6ghz - 12.1" SXGA+ - 8GB RAM - Intel G3 300GB SSD
X40 - 1.4ghz - 1.5GB RAM - 8GB Transcend 300x CF on Addonics CF/IDE Adapter
T42p - 1.8ghz - 15" UXGA - 1GB RAM - 160GB HDD
X61t - C2D 1.6ghz - 12.1" SXGA+ - 8GB RAM - Intel G3 300GB SSD
-
vincentfox
- Freshman Member
- Posts: 106
- Joined: Tue Dec 13, 2005 7:14 pm
2662-9EU. Perhaps you just had a defective stick?
I rely a lot on http://www.crucial.com/ they have a menu-choice widget you can use to find the right memory for your machine.
I rely a lot on http://www.crucial.com/ they have a menu-choice widget you can use to find the right memory for your machine.
It worked in an old gateway laptop I had before. I use crucial for when I'm upgrading the computers at work, but for myself I like to be cheap. Crucial wants to charge me $130 for 512MB. I paid $95 with 2 day shipping from zipzoomfly. I'll have it tomorrow and I'll see how it goes.vincentfox wrote:2662-9EU. Perhaps you just had a defective stick?
I rely a lot on http://www.crucial.com/ they have a menu-choice widget you can use to find the right memory for your machine.
X22 - 800mhz - 640MB RAM - 60GB Hitachi 7200rpm 7k100
X40 - 1.4ghz - 1.5GB RAM - 8GB Transcend 300x CF on Addonics CF/IDE Adapter
T42p - 1.8ghz - 15" UXGA - 1GB RAM - 160GB HDD
X61t - C2D 1.6ghz - 12.1" SXGA+ - 8GB RAM - Intel G3 300GB SSD
X40 - 1.4ghz - 1.5GB RAM - 8GB Transcend 300x CF on Addonics CF/IDE Adapter
T42p - 1.8ghz - 15" UXGA - 1GB RAM - 160GB HDD
X61t - C2D 1.6ghz - 12.1" SXGA+ - 8GB RAM - Intel G3 300GB SSD
-
- Similar Topics
- Replies
- Views
- Last post
-
-
X20 to X22/23/24 conversion possible?
by jeffbaichina » Thu Mar 02, 2017 11:42 pm » in ThinkPad X2/X3/X4x Series incl. X41 Tablet - 1 Replies
- 423 Views
-
Last post by jaspen-meyer
Sat Mar 04, 2017 1:54 pm
-
-
-
W520: Questions regarding heatsinks and fans.
by Surfrider » Wed Jan 04, 2017 12:40 am » in ThinkPad W500/510/520 and W7x0 Series - 9 Replies
- 1841 Views
-
Last post by jcvjcvjcvjcv
Thu Jan 05, 2017 11:00 pm
-
-
-
Just joined and Frankenpad questions
by cortina18 » Sat Jan 14, 2017 2:00 pm » in ThinkPad T6x Series - 21 Replies
- 2269 Views
-
Last post by Vonfeffer
Mon Jan 30, 2017 12:16 pm
-
-
-
WOL (Wake On Lan) T-61 Win7 32bit Problem/Questions
by EAkamai » Sun Jan 22, 2017 4:41 am » in ThinkPad T6x Series - 1 Replies
- 822 Views
-
Last post by EAkamai
Tue Jan 24, 2017 4:39 pm
-
Who is online
Users browsing this forum: No registered users and 3 guests





