Anyone else have a TMD 14.1" SXGA+ panel?

T60/T61 series specific matters only
Post Reply
Message
Author
hoya
Senior Member
Senior Member
Posts: 670
Joined: Fri Aug 05, 2005 8:01 pm
Location: Washington, DC

Anyone else have a TMD 14.1" SXGA+ panel?

#1 Post by hoya » Tue Apr 18, 2006 1:52 pm

My 2623D6U is due to arrive this week with a TMD panel, and I'm wondering what to expect.

According to the TMD web site, the spec's are good (200 nit brightness rather than 150 on Hydis and Samsung panels).

http://tmd-product.tmdisplay.com/index_e.cfm

Edit: My D6U has arrived and I'm not impressed with the TMD... see post below
Last edited by hoya on Wed Apr 19, 2006 5:07 pm, edited 1 time in total.

myrighteye
Posts: 18
Joined: Tue Mar 21, 2006 3:27 pm

#2 Post by myrighteye » Tue Apr 18, 2006 3:07 pm

Is the panel you're describing the same as the IPS flexview? Are they shipping those out now? I know there was a thread about that earlier debating whether or not 14.1 models came with a better panel? If so, I can still return my 2623D7U and purchase the SVGA + model. I'm assuming you have confirmed with your serial number after the item shipped out?

hoya
Senior Member
Senior Member
Posts: 670
Joined: Fri Aug 05, 2005 8:01 pm
Location: Washington, DC

#3 Post by hoya » Tue Apr 18, 2006 3:17 pm

myrighteye wrote:Is the panel you're describing the same as the IPS flexview? Are they shipping those out now? I know there was a thread about that earlier debating whether or not 14.1 models came with a better panel? If so, I can still return my 2623D7U and purchase the SVGA + model. I'm assuming you have confirmed with your serial number after the item shipped out?
No, the panel I'm referring to is NOT an IPS FlexView panel. I read that thread awhile back but it was just a typo. There is no manufacturer currently making a 14.1" SXGA+ IPS panel.

Lenovo uses 14.1" SXGA+ LCD panels from three different manufacturers: BOE Hydis, Samsung, and TMD, which stands for Toshiba M a t s u s h i t a Display Technology Co., Ltd.
myrighteye wrote:If so, I can still return my 2623D7U and purchase the SVGA + model.
there is no such thing as an SVGA + panel. I think you meant to say SXGA+

astro
Junior Member
Junior Member
Posts: 370
Joined: Wed Feb 08, 2006 3:07 pm
Location: Australia

#4 Post by astro » Tue Apr 18, 2006 4:34 pm

hoya wrote:
myrighteye wrote:If so, I can still return my 2623D7U and purchase the SVGA + model.
there is no such thing as an SVGA + panel. I think you meant to say SXGA+
And your 2623D7U already comes with a 14.1" SXGA+ panel.
60-200763-2500-2.0-1024-1400-14.1-1400-1050-3945-100-5400

zzyss
Sophomore Member
Posts: 184
Joined: Thu May 20, 2004 5:08 am

#5 Post by zzyss » Wed Apr 19, 2006 2:17 am

How do you know what brand panel you're getting?
T60p (200784U) - standard (no upgrades... yet)

hoya
Senior Member
Senior Member
Posts: 670
Joined: Fri Aug 05, 2005 8:01 pm
Location: Washington, DC

#6 Post by hoya » Wed Apr 19, 2006 6:17 am

zzyss wrote:How do you know what brand panel you're getting?
I did a parts lookup using the serial number on the invoice:
http://www-307.ibm.com/pc/support/site. ... sLookup.vm

zzyss
Sophomore Member
Posts: 184
Joined: Thu May 20, 2004 5:08 am

#7 Post by zzyss » Wed Apr 19, 2006 8:18 am

hoya wrote:
zzyss wrote:How do you know what brand panel you're getting?
I did a parts lookup using the serial number on the invoice:
http://www-307.ibm.com/pc/support/site. ... sLookup.vm
Wow... cool link. Thanks! (Although the funny thing is that almost the entire list is wrong now, since virtually everything has either been upgraded, or replaced under warranty).
T60p (200784U) - standard (no upgrades... yet)

hoya
Senior Member
Senior Member
Posts: 670
Joined: Fri Aug 05, 2005 8:01 pm
Location: Washington, DC

#8 Post by hoya » Wed Apr 19, 2006 5:08 pm

I just received my D6U today...

The TMD panel is decent. It's definitely brighter than the Samsung panel on my T43 and the whites are much whiter, but the viewing angles are decidedly worse.

I can upload some pix to flikr if anyone is interested.

dxben
Freshman Member
Posts: 116
Joined: Mon Apr 17, 2006 5:29 pm

#9 Post by dxben » Wed Apr 19, 2006 5:14 pm

i'd be interested. thx.

RaysMD
Junior Member
Junior Member
Posts: 251
Joined: Sun May 23, 2004 1:13 pm

#10 Post by RaysMD » Wed Apr 19, 2006 7:48 pm

so, the samsung > Hydis > TMD?
X300 gone... Last of the T61p 14.1"

hoya
Senior Member
Senior Member
Posts: 670
Joined: Fri Aug 05, 2005 8:01 pm
Location: Washington, DC

#11 Post by hoya » Wed Apr 19, 2006 9:49 pm

RaysMD wrote:so, the samsung > Hydis > TMD?
in terms of brightness, the Hydis is rated at 150 and the TMD at 200, but I would say that if Samsung is 150, Hydis would be 165 and TMD would be 175. that's just my best estimate given my memory of the Hydis panels.

the viewing angles on the TMD seem worse than either Samsung or Hydis, even though I didn't think that was possible! it's not a deal-breaker for me since I rarely give presentations (usually just a photo slide show for a few friends).

overall, the 14.1" SXGA+ panels are similar enough that I don't think people would really notice any difference unless you sat the two side-by-side and looked for variations.

the first 3 shots show the T60 w/ TMD on the left and a T43 w/ a Samsung on the right:
http://www.flickr.com/photos/11221256@N00/?saved=1

donking!
Junior Member
Junior Member
Posts: 387
Joined: Mon Jan 23, 2006 3:55 pm

#12 Post by donking! » Thu Apr 20, 2006 2:04 am

I believe the TMD is supposed to draw less power than other panels. Not absolutely sure this is correct or how much the difference is (if it is correct). But that may be another factor to consider, other than appearance characteristics of the different LCD panels.

hoya
Senior Member
Senior Member
Posts: 670
Joined: Fri Aug 05, 2005 8:01 pm
Location: Washington, DC

#13 Post by hoya » Thu Apr 20, 2006 9:40 am

donking! wrote:I believe the TMD is supposed to draw less power than other panels. Not absolutely sure this is correct or how much the difference is (if it is correct). But that may be another factor to consider, other than appearance characteristics of the different LCD panels.
actually, both the Hydis and TMD panels are rated at exactly 5.2W for power consumption. Samsung doesn't have a number on their site but I assume it would be close to that amount.

TMD: LTD141EM1S or LTD141EM4S - 5.2W
BOE Hydis: HT14P12 - 5.2W
Samsung: LTN141P4 - ?

ipark
Freshman Member
Posts: 69
Joined: Tue Apr 04, 2006 7:46 am
Location: Los Angeles

#14 Post by ipark » Sun May 14, 2006 7:51 am

I can't seem to find my LCD maker. My FRU is 92P6760, can someone help me please? All I know is that my LCD is bright, white, and the viewing angle is better than other T42s that my friends own. Thanks. :D
t42 2379r5u

hoya
Senior Member
Senior Member
Posts: 670
Joined: Fri Aug 05, 2005 8:01 pm
Location: Washington, DC

#15 Post by hoya » Sun May 14, 2006 9:01 am

ipark wrote:I can't seem to find my LCD maker. My FRU is 92P6760, can someone help me please? All I know is that my LCD is bright, white, and the viewing angle is better than other T42s that my friends own. Thanks. :D
you havea samsung:
http://www-307.ibm.com/pc/support/site. ... MIGR-58431

ipark
Freshman Member
Posts: 69
Joined: Tue Apr 04, 2006 7:46 am
Location: Los Angeles

#16 Post by ipark » Sun May 14, 2006 7:11 pm

hoya wrote:
ipark wrote:I can't seem to find my LCD maker. My FRU is 92P6760, can someone help me please? All I know is that my LCD is bright, white, and the viewing angle is better than other T42s that my friends own. Thanks. :D
you havea samsung:
http://www-307.ibm.com/pc/support/site. ... MIGR-58431

AHH thanks!
t42 2379r5u

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 6 guests