I feel electricity from my right palmrest...

T60/T61 series specific matters only
Post Reply
Message
Author
chung1q
Posts: 3
Joined: Sun Apr 23, 2006 11:03 am

I feel electricity from my right palmrest...

#1 Post by chung1q » Mon Apr 24, 2006 9:31 pm

Does anyone feel electricity from right palmrest??
and does anyone have a solution for this?
Thank you.

jdhurst
Admin
Admin
Posts: 5831
Joined: Thu Apr 29, 2004 6:49 am
Location: Toronto, Canada

#2 Post by jdhurst » Mon Apr 24, 2006 9:41 pm

Static, so ground yourself. The palmrest is plastic, and it will not conduct electricty except if wet. Further, what is under the palmrest is 5 volt stuff and other than the UltraNav, it doesn't touch the palmrest. So I would be very certain you are getting static shocks. ... JD Hurst

chung1q
Posts: 3
Joined: Sun Apr 23, 2006 11:03 am

#3 Post by chung1q » Mon Apr 24, 2006 10:07 pm

jdhurst wrote:Static, so ground yourself. The palmrest is plastic, and it will not conduct electricty except if wet. Further, what is under the palmrest is 5 volt stuff and other than the UltraNav, it doesn't touch the palmrest. So I would be very certain you are getting static shocks. ... JD Hurst
Thank you for your reply...
but I think I got schock from fingerprint sensor(?)...
I am not quite sure.
when I remove my foot from groud, I don't feel any electricity.

astro
Junior Member
Junior Member
Posts: 370
Joined: Wed Feb 08, 2006 3:07 pm
Location: Australia

Re: I feel electricity from my right palmrest...

#4 Post by astro » Mon Apr 24, 2006 10:09 pm

chung1q wrote:Does anyone feel electricity from right palmrest??
and does anyone have a solution for this?
Thank you.
Could be Lenovo's experimental Personal Area Networking technology. It uses your skin to store/transfer data. Very useful, but you just have to be careful not to touch anyone you don't trust with your private information from now on...





:P
60-200763-2500-2.0-1024-1400-14.1-1400-1050-3945-100-5400

GoofyG28
Freshman Member
Posts: 92
Joined: Thu Feb 23, 2006 12:01 am
Location: San Francisco Bay Area

Re: I feel electricity from my right palmrest...

#5 Post by GoofyG28 » Tue Apr 25, 2006 1:17 am

[quote="astro"]Could be Lenovo's experimental Personal Area Networking technology. It uses your skin to store/transfer data. Very useful, but you just have to be careful not to touch anyone you don't trust with your private information from now on...



LMAO :lol: :lol: :lol:

... Getting shocked from the fingerprint reader does sound plausible to me, though...

archer6
Moderator Emeritus
Moderator Emeritus
Posts: 2674
Joined: Thu Mar 09, 2006 10:51 pm
Location: California, USA

Re: I feel electricity from my right palmrest...

#6 Post by archer6 » Tue Apr 25, 2006 1:21 am

GoofyG28 wrote:
astro wrote:Could be Lenovo's experimental Personal Area Networking technology. It uses your skin to store/transfer data. Very useful, but you just have to be careful not to touch anyone you don't trust with your private information from now on...



LMAO :lol: :lol: :lol:

... Getting shocked from the fingerprint reader does sound plausible to me, though...
And I thought it was just me.... :D
Favorites From My ThinkPad Collection

Workstations... T40p ~ T41p ~ T42p ~ T43p ~ T60p ~ T61p ~ W500 ~ W510
T Series..... T22 ~ 30 ~ 40 ~ 41 ~ 42 ~ 43 ~ 60 ~ 400 ~ 500 ~ 510
X Series..... X20 ~ 30 ~ 40 ~ 60 ~ 60s ~ 200 ~ 200s ~ 301
Netbooks... S-10 ~ S-12

BillMorrow
*Senior* Admin
*Senior* Admin
Posts: 7154
Joined: Tue Apr 13, 2004 9:40 pm
Location: San Francisco -> Florida -> Georgia
Contact:

#7 Post by BillMorrow » Tue Apr 25, 2006 1:34 am

:lol: :D :lol:

ok, very funny..! 8)

and when he sweats, does he sweat bits or bytes..?

IMO, reality is it is HIGHLY unlikely that this user is experiencing anything other than static..
and that is unlikely too..
at least in any significant strength..

that said if he is in an extremely dry environment and has wool carpeting (or nylon, i forget) and he is prone to shuffling along (thus dragging his feet) a buildup of static might occur and the thinkpad might be discharging his charge.. :shock:
Bill Morrow, kept by parrots :parrot: & cockatoos
Sysop - forum.thinkpads.com

*
She was not what you would call refined,
She was not what you would call unrefined,
She was the type of person who kept a parrot.
~~~Mark Twain~~~

ThinkPad
ThinkPadder
ThinkPadder
Posts: 1085
Joined: Sun Nov 21, 2004 7:33 pm
Location: Windy City

#8 Post by ThinkPad » Tue Apr 25, 2006 1:35 am

Its probably static from the touchpad.
Thinkpad X-41 Tablet 1869 CSU- 1.6GHz
Thinkpad T-42P 2373 GUU-2.1 GHz; 2 GB RAM; Mini-dock
::Sierra AirCard WWAN 875::NMB Thai::
RIP-Thinkpad T41 2379 DJU

Nick Y
Junior Member
Junior Member
Posts: 438
Joined: Tue Feb 14, 2006 2:17 pm
Location: Bucks., UK

#9 Post by Nick Y » Tue Apr 25, 2006 4:23 am

It could be that your laptop is floating wrt ground and hence may be at 115/230V depending upon where you are. While the current flow is very low, it is a bit un-nerving, as I found with my TV, which seems to be floating at 230V (here in UK) unless grounded by something connected to it. Often a system will float to mid voltage, unless a resistor or auxilary device provides a link to ground.

As for static, as we have a lot of static build up at home, it concerns me that I get a static shock when swiping the fingerprint reader. At times of high static, I try and touch something like a radiator beforehand to take static to ground.
IBM ThinkPad T43-2668-F5G,
T41p-2373-GEG & a T61-6466-9YG

mg
Freshman Member
Posts: 90
Joined: Wed Aug 03, 2005 4:08 pm
Location: Europe

#10 Post by mg » Tue Apr 25, 2006 4:59 am

Try a different power adapter. If you have one with three wires, be sure that ground is connected properly. As Nick Y mentions, it can be floating. E.g. in some very old houses, where there is no ground wiring, if only two of the three wires are plugged in (one should not do that), one might be able to feel some current flow when sliding the back of a hand on the LCD screen (very lightly touching) -- it feels like a little sticky and vibrates a little (somewhat similar to the fan's vibration).

darrenf
Senior Member
Senior Member
Posts: 740
Joined: Thu May 13, 2004 6:23 pm
Location: Durham, North Carolina

#11 Post by darrenf » Tue Apr 25, 2006 10:30 am

I ask this as someone with a limited understanding of EE so be gentle, but if the US power supply lacks a ground wire, why do the international power supplies need one? Also, since AC power never enters the laptop, how could the grounding of the AC/DC brick affect the laptop? Wouldn't the AC generated for the backlight inverter be imune to grounding issues at the brick as well since it's generated anew from DC current?

-darren

archer6
Moderator Emeritus
Moderator Emeritus
Posts: 2674
Joined: Thu Mar 09, 2006 10:51 pm
Location: California, USA

#12 Post by archer6 » Tue Apr 25, 2006 10:54 am

BillMorrow wrote: that said if he is in an extremely dry environment and has wool carpeting (or nylon, i forget) and he is prone to shuffling along (thus dragging his feet) a buildup of static might occur and the thinkpad might be discharging his charge.. :shock:
Uh... excuse me while I shuffle over to ....oops, just got shocked, to install the new 1GB ram module. Smiling with the self satisfaction of doing the job (myself). Oh wait... (booting up, checking the bios) the ram is not recognized, shuffle shuffle, oops forgot to ground myself. What ram? :?
Favorites From My ThinkPad Collection

Workstations... T40p ~ T41p ~ T42p ~ T43p ~ T60p ~ T61p ~ W500 ~ W510
T Series..... T22 ~ 30 ~ 40 ~ 41 ~ 42 ~ 43 ~ 60 ~ 400 ~ 500 ~ 510
X Series..... X20 ~ 30 ~ 40 ~ 60 ~ 60s ~ 200 ~ 200s ~ 301
Netbooks... S-10 ~ S-12

christopher_wolf
Special Member
Posts: 5741
Joined: Sat Oct 08, 2005 1:24 pm
Location: UC Berkeley, California
Contact:

#13 Post by christopher_wolf » Tue Apr 25, 2006 1:14 pm

*taken from the BOFH handbook*

"Before giving a RAM update to a user's machine, be sure to "zero" the RAM by running it up and down the carpet tiles two or ten times....This will help remove any residual memories of previous programs the RAM may have had and prevent actual crashing of any of the user's programs.

:lol:

Joking aside; I have gotten shocks before. There are certainly clothing combos to avoid like the plague when working with computers. Such as large sweater turtlenecks made out of wool plus rubber shoes. You can get some pretty significant shocks from that; even through the Fingerprint Reader.

HTH :)
IBM ThinkPad T43 Model 2668-72U 14.1" SXGA+ 1GB |IBM 701c

~o/
I met someone who looks a lot like you.
She does the things you do.
But she is an IBM.
/~o ---ELO from "Yours Truly 2059"

egibbs
Senior Member
Senior Member
Posts: 896
Joined: Tue Apr 27, 2004 6:05 am
Location: New Jersey

#14 Post by egibbs » Wed Apr 26, 2006 6:33 am

If the OP was talking about a brief static shock, that is one thing. If he is talking about a persistent buzzing sensation, then that is something entirely different.

As a previous poster noted the AC from the wall never enters the machine. But the inverter for the backlight produces high voltage AC, and it could be leaking enough to give a decent shock.

If he is really feeling an electric current from his machine he needs to stop using it NOW and call Lenovo to get it fixed. This is a serious safety issue.

And before people object that the inverter output is very low current - people have been killed by less under adverse conditions. It really doesn't take much to stop the heart if you get the juice flowing through the chest the wrong way.

Ed Gibbs

mg
Freshman Member
Posts: 90
Joined: Wed Aug 03, 2005 4:08 pm
Location: Europe

#15 Post by mg » Wed Apr 26, 2006 4:44 pm

darrenf wrote:if the US power supply lacks a ground wire, why do the international power supplies need one?
My guess is that European regulations require three wires if power consumption is above a certain value. Or maybe one is allowed to use it in a wider range of environments if it has a ground wire. I would assume that EU regulations are more strict because the voltage is 230 V compared to 115 V in the US (which also means better insulation would be required for 230 V while the copper wires themselves can be thinner).
Also, since AC power never enters the laptop, how could the grounding of the AC/DC brick affect the laptop?
Quality of isolation of the power adapter?

Nick Y
Junior Member
Junior Member
Posts: 438
Joined: Tue Feb 14, 2006 2:17 pm
Location: Bucks., UK

#16 Post by Nick Y » Thu Apr 27, 2006 1:59 am

a) The 'third' wire is a protective device.

b) Why does the 'dc 0V' float way from 0V if there is isolation between AC and DC sides -i.e. via (non-auto) transformer when there is no connection to tie the DC 0V to ground? Leakage and cross coupling via stray capacitance. (Try -carefully- connecting AC voltmeter between antenna connector and ground on many TV's.) As a youngster I once got a nasty shock when I was playing around with / mending a TV. I was touching the chassis and I leant back and touched a radiator with my other hand. (Later, post Uni, we had a chap at work who was aligning CRTs and he told me that he always worked on them with one hand in his pocket; very sensible, esp. with EHT for CRTs.)
IBM ThinkPad T43-2668-F5G,
T41p-2373-GEG & a T61-6466-9YG

jdhurst
Admin
Admin
Posts: 5831
Joined: Thu Apr 29, 2004 6:49 am
Location: Toronto, Canada

#17 Post by jdhurst » Thu Apr 27, 2006 8:05 am

Old TV's were different in that they had higher voltages, generally did not use transformers to isolate the mains AC, and used the metal chassis as TV ground. Most of them had polarized plugs and you could have a dangerous situation if not maintained properly and plugged in the right way.

An IBM ThinkPad is very different in that, in my experience, the DC voltage out of the power brick is isolated from the mains AC. I never say "never", but I have not seen a situation where there is any external voltage on the ThinkPad ground system. (I do have the equipment to check).

The recent recalls of power adapters (IBM ThinkPad i was an early one) were related to fire safety IIRC, not electrical grounding safety. ... JD Hurst

GomJabbar
Moderator
Moderator
Posts: 9765
Joined: Tue Jun 07, 2005 6:57 am

#18 Post by GomJabbar » Thu Apr 27, 2006 8:12 am

chung1q wrote:Thank you for your reply...
but I think I got schock from fingerprint sensor(?)...
I am not quite sure.
when I remove my foot from groud, I don't feel any electricity.
Do you get a continuous shock, or just a quick one-time shock? If you touch it right away again (without moving yourself or the laptop), do you get shocked again?
DKB

kulivontot
Sophomore Member
Posts: 232
Joined: Thu Mar 30, 2006 9:01 pm

#19 Post by kulivontot » Fri Apr 28, 2006 2:21 am

I've had this shock before, I know what you're talking about. It's not too frequent though, so I don't think there's current leaking from the power supply into the fingerprint reader. I'm agreeing with everyone else that it's probably just static shock.

chung1q
Posts: 3
Joined: Sun Apr 23, 2006 11:03 am

#20 Post by chung1q » Sat Apr 29, 2006 2:04 pm

After I bought a surge master, I didn't get any shock.
Thank you for all replies! :P
Do you get a continuous shock, or just a quick one-time shock? If you touch it right away again (without moving yourself or the laptop), do you get shocked again?

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 1 guest