Games Crash with T60p video card

T60/T61 series specific matters only
Message
Author
sergeycentral
Posts: 49
Joined: Mon May 15, 2006 11:30 pm
Location: Boston, MA

Games Crash with T60p video card

#1 Post by sergeycentral » Tue May 16, 2006 12:11 am

I have tried 2 games with my T60p (2007C8U):
Doom 3 and Ghost Recon Advanced Warfighter

both of them crashed within 2 minutes of gameplay

GRAW got blue screen with Memory Parity Error
Doom 3 got MS error report with error in atioglgl.dll

games ran in meduim setting

crashes occured in game when new areas of the game loaded, like walking thru a door or expirencing heavier gfx loads.

i have also noticed short pauses in rendering/play upon loading, is this normal?

this is out of the box testing, with the most updated gfx driver using thinkvanatage system update

what in the world is going on???
Last edited by sergeycentral on Tue May 16, 2006 12:23 am, edited 1 time in total.

jtlau
Posts: 18
Joined: Thu May 04, 2006 10:20 pm

#2 Post by jtlau » Tue May 16, 2006 12:17 am

I've tried Doom 3 on my T60 (2623-D7U). I've installed all the latest drivers and what not and the game runs fine.

I have it set at medium settings, 1280x1024 and I have a 2Ghz cpu with 512mb ram. The only problem I have with Doom 3 is that after loading new levels, there is major lag time for a few seconds and then everything returns to normal.

You might want download the latest drivers, maybe that'll solve your problems.

sergeycentral
Posts: 49
Joined: Mon May 15, 2006 11:30 pm
Location: Boston, MA

#3 Post by sergeycentral » Tue May 16, 2006 12:25 am

during this lag time (in game) this is when the game crashes

i have the latest drivers

pundit
Junior Member
Junior Member
Posts: 318
Joined: Tue Feb 28, 2006 9:52 pm
Location: Ann Arbor, USA
Contact:

#4 Post by pundit » Tue May 16, 2006 12:30 am

I experienced this with both the demos of Quake IV and Doom III. (Which I guess is reasonable considering it's the same tech.)

I am guessing if you replace the FireGL drivers with the more mainstream ATI drivers things will be fine.
Happily picks up his three grand; unhappily hands it over to another company.

pekka
Posts: 36
Joined: Thu Aug 25, 2005 3:15 am
Location: Helsinki

Re: Games Crash with T60p video card

#5 Post by pekka » Tue May 16, 2006 12:52 am

sergeycentral wrote: what in the world is going on???
Is your fan running and the GPU isn't overheating?

Other option is buggy display driver which is also quite possible considering it's a driver made by Ati... Try Omegadrivers instead: www.omegadrivers.net
T60 2007-49G

sergeycentral
Posts: 49
Joined: Mon May 15, 2006 11:30 pm
Location: Boston, MA

#6 Post by sergeycentral » Tue May 16, 2006 1:24 am

ok I have tried the drivers from ATI.com for the FireGL V series.

They will just not install! Message being, you dont have compatible hardware/software blah blah blah. (tried everything including in safe mode).

The drivers for ATI at Omegadrivers are for the Radeon series.. they have none for FireGL V series..


Something is definitly wrong here. It should work fine out of the box, with the most update driver that was specifically created for this model computer.

Fan is running.. GPU is not over heating.. I have done no overclocking.. This system is 2 days old out of the box..


Do DirectX9 games run fine on your T60Ps? With the same ATI drivers installed from thinkvantage upgrade.. if not this must have a defected gfx card, and I need to return this

pekka
Posts: 36
Joined: Thu Aug 25, 2005 3:15 am
Location: Helsinki

#7 Post by pekka » Tue May 16, 2006 1:56 am

Omegadrivers work with FireGL cards also.
T60 2007-49G

sergeycentral
Posts: 49
Joined: Mon May 15, 2006 11:30 pm
Location: Boston, MA

#8 Post by sergeycentral » Tue May 16, 2006 4:07 am

the Omegadrivers worked... no more crashes

mmo
Freshman Member
Posts: 54
Joined: Tue Feb 08, 2005 8:04 pm

#9 Post by mmo » Tue May 16, 2006 8:42 am

I might want to give these a try as well. Can you be more specific where you found those "Omega drivers"? The ATI drivers/download area didn't yield any hit when I searched for "omega".


Michael

ehsu
Freshman Member
Posts: 80
Joined: Thu Feb 17, 2005 12:31 pm
Location: Toronto, ON

#10 Post by ehsu » Tue May 16, 2006 6:37 pm

I use DriverCleaner, an video driver removal utility, to completely clean out all the ATI drivers before I install Omegadrivers.

1. Download/Install DriverCleaner

2. Uninstall ATI drivers using add/remove software from control panel

3. Reboot in safe mode, open DriverCleaner

4. Use CabCleaner to clean out the cab files

5. Switch back to DriverCleaner, Select ATI to clean all ATI drivers

6. Reboot in normal mode, install Omegadriver

Complete cleaned without previous driver residues.

Qoz3a
Posts: 15
Joined: Mon May 29, 2006 12:56 pm
Location: Kuwait

#11 Post by Qoz3a » Mon May 29, 2006 1:54 pm

Greetings guyz ..

i also got the same problem with games .. i tried BF2 and BFME2 ,my T60P (2623-DDU) is freezing after 10 to 20 mintues and i have to hold the shutdown button to restart the machine..

i tried ur way to fix this problem ehsu and still didnt work for me ..

any help guyz ??

DenTP4rm
Sophomore Member
Posts: 199
Joined: Wed May 03, 2006 2:12 pm
Location: Northeast Brazil

#12 Post by DenTP4rm » Mon May 29, 2006 7:14 pm

ehsu wrote:I use DriverCleaner, an video driver removal utility, to completely clean out all the ATI drivers before I install Omegadrivers.
Hey "ehsu",
Thanks for the step-by-step. I have one question. Following your link to the Omegadriver site I could only find one file as of 5/29/06 "Radeon Omega Drivers 3.8.252 (Catalyst 6.5)". Will this driver work for the ATI Mobility FireGL V5200 in the T60p?
thanks,
DenTP4rm

ehsu
Freshman Member
Posts: 80
Joined: Thu Feb 17, 2005 12:31 pm
Location: Toronto, ON

#13 Post by ehsu » Mon May 29, 2006 8:04 pm

DenTP4rm wrote: Hey "ehsu",
Thanks for the step-by-step. I have one question. Following your link to the Omegadriver site I could only find one file as of 5/29/06 "Radeon Omega Drivers 3.8.252 (Catalyst 6.5)". Will this driver work for the ATI Mobility FireGL V5200 in the T60p?
Hi Den,

Sorry, I don't have a T60P so I cannot confirm your question. Based on previous posters in this thread, you will find posts confirmed that OmegaDriver works with FireGL cards.
sergeycentral wrote:
the Omegadrivers worked... no more crashes
pekka wrote:
Omegadrivers work with FireGL cards also.
Qoz3a wrote: i tried ur way to fix this problem ehsu and still didnt work for me ..

any help guyz ??
Sorry, that didn't help much. May I suggest that there are other forums that maybe helpful. You can also give them a try too. Good luck.

http://www.cybertechhelp.com/forums/
http://www.xtremesystems.org/forums/
http://forums.guru3d.com/
http://www.rage3d.com/board/forumdisplay.php?f=27
http://www.hardforum.com/

DenTP4rm
Sophomore Member
Posts: 199
Joined: Wed May 03, 2006 2:12 pm
Location: Northeast Brazil

#14 Post by DenTP4rm » Mon May 29, 2006 8:57 pm

ehsu wrote:Hi Den,

Sorry, I don't have a T60P so I cannot confirm your question. Based on previous posters in this thread, you will find posts confirmed that OmegaDriver works with FireGL cards.
Hey ehsu,
Thanks for the quick reply. I guess what I'm asking is, when you say "OmegaDriver" are you referring to the driver at the link you placed in the earlier email, i.e. http://www.omegadrivers.net/ati/win2k_xp.php ? I'm not familiar with the site and I couldn't find any other drivers specifically for mobile cards. Is it a one-driver-fits-all deal?
thanks,
Den

jpresto
Posts: 34
Joined: Fri May 14, 2004 12:30 pm

#15 Post by jpresto » Tue May 30, 2006 12:27 am

I'm running into the same problem, using ati drivers from lenovo site.

T60p 2623. Running TCAW and Elder Scrolls 4 both hang after 5-10 mins.

I haven't tried moving to the omega drivers, but I was assuming this was an overheat issue. Was thinking I'd try prime95 to rule out cpu overhead, but given the amount of heat I was getting off the laptop I think it was more GPU than CPU related.

Does anyone know if Omega drivers are underclocked?

Qoz3a
Posts: 15
Joined: Mon May 29, 2006 12:56 pm
Location: Kuwait

#16 Post by Qoz3a » Tue May 30, 2006 12:40 am

Sorry, that didn't help much. May I suggest that there are other forums that maybe helpful. You can also give them a try too. Good luck.

http://www.cybertechhelp.com/forums/
http://www.xtremesystems.org/forums/
http://forums.guru3d.com/
http://www.rage3d.com/board/forumdisplay.php?f=27
http://www.hardforum.com/
thanx for your support man ..

Qoz3a
Posts: 15
Joined: Mon May 29, 2006 12:56 pm
Location: Kuwait

#17 Post by Qoz3a » Tue May 30, 2006 12:43 am

jpresto wrote:
Does anyone know if Omega drivers are underclocked?
I'm sure u can do whatever u want with omega .. but i think u need a guide to do it .. cuz its lettle complicated

astro
Junior Member
Junior Member
Posts: 370
Joined: Wed Feb 08, 2006 3:07 pm
Location: Australia

#18 Post by astro » Tue May 30, 2006 12:59 am

jpresto wrote:I haven't tried moving to the omega drivers, but I was assuming this was an overheat issue. Was thinking I'd try prime95 to rule out cpu overhead, but given the amount of heat I was getting off the laptop I think it was more GPU than CPU related.
Yes, the GPU is the hottest component in these T60s. Have you tried running ThinkPad FanControl while you are gaming (best if you can run the game in a window)? It would be interesting to see what temps you are getting.
60-200763-2500-2.0-1024-1400-14.1-1400-1050-3945-100-5400

jpresto
Posts: 34
Joined: Fri May 14, 2004 12:30 pm

#19 Post by jpresto » Tue May 30, 2006 1:11 am

Interesting app - running T43 .18 I get the following reads:

CPU 55°C (0x78)
APS 43°C (0x79)
PCM 44°C (0x7a)
GPU 70°C (0x7b)
BAT 36°C (0x7c)
BAT 34°C (0x7e)
BUS 51°C (0xc0)
PCI 55°C (0xc1)
PWR 53°C (0xc2)

This is not gaming, just normal use. Others seeing similar numbers?

I'll try gaming in the next few days and see what I hit.

astro
Junior Member
Junior Member
Posts: 370
Joined: Wed Feb 08, 2006 3:07 pm
Location: Australia

#20 Post by astro » Tue May 30, 2006 1:48 am

jpresto wrote:Interesting app - running T43 .18 I get the following reads:

CPU 55°C 42°C
APS 43°C 33°C
PCM 44°C 34°C
GPU 70°C 63°C
BAT 36°C 50°C
BAT 34°C 27°C
BUS 51°C 35°C
PCI 55°C 42°C
PWR 53°C 42°C

This is not gaming, just normal use. Others seeing similar numbers?
Wow, I didn't realise the T60p would be so much hotter on average than my 2007-63U (2.0GHz, X1400) -- my numbers (idle on AC, @office) added above.
60-200763-2500-2.0-1024-1400-14.1-1400-1050-3945-100-5400

Qoz3a
Posts: 15
Joined: Mon May 29, 2006 12:56 pm
Location: Kuwait

#21 Post by Qoz3a » Tue May 30, 2006 3:21 am

guyz ... T60P owners .. plz we need help with this serious problem .. I'm tring my best to solve this problem and i hope u do the same ..

I used the step-by-step solution by ehsu and it just delayed the crash ... before it was from 5 to 10 minutes now it's between 15 to 20 minutes .. and i'm sure its not heat issue .. i tried the latest drives by ATI and also Omega .. and my system is up to date for all drivers including direct X and thinkvantage ...

and those who are intersing to know the gaming expirince of T60P..

1) for BF2 .. i played high details with 1024X768 resolution .. guess what ?? IT WAS PERFECT !! no lag, very nice details the only problem is the crashing ..

2)for BFME2 .. also ultra detalis with 1024X768 resolution .. lttle laggy but playable .. but also still crashing.

p.s. sorry for my english language

Qoz3a
Posts: 15
Joined: Mon May 29, 2006 12:56 pm
Location: Kuwait

#22 Post by Qoz3a » Tue May 30, 2006 8:26 am

actully i think the best way is to replace the FireGL drivers with Redeon drivers .. but unfortunatly all the guides that i found were for older FireGL cards and using old programs..

if someone would mind to place a guide how to replace the current FireGL drivers (v5200) with redeon (x1600)..

thanx in advance

Qoz3a
Posts: 15
Joined: Mon May 29, 2006 12:56 pm
Location: Kuwait

#23 Post by Qoz3a » Tue May 30, 2006 3:02 pm

hey thinkpad gurus we are really facing a big problem here with T60p :(

FireGL made me crazy !! i have been tring to fix the crash about 8 hours and 0 result :(

plz if anyone knew how to fix this prblem just paste it here .. this is not only for me .. it's for all T60P owners who wants to play games

tselling
**SENIOR** Member
**SENIOR** Member
Posts: 572
Joined: Wed Apr 28, 2004 10:18 am
Location: Derry, NH

#24 Post by tselling » Tue May 30, 2006 3:18 pm

I've been playing Oblivion without any hangs or crashes with the latest Lenovo drivers.
T61P 2.2ghz 4GB 7K200GB 15.4" WSXGA+ Vista 64
HP 2530p L7400 1.86Ghz 3GB 160GB Windows 7 Pro 64
(Hubby) HP 2510p U7500 1.06Ghz 2GB 5K120GB 12" LED WXGA XP Pro
(4 year old son) Toughbook CF-29 1.3Ghz 1.2GB 5K250GB 13.3" XGA XP Pro

Qoz3a
Posts: 15
Joined: Mon May 29, 2006 12:56 pm
Location: Kuwait

#25 Post by Qoz3a » Tue May 30, 2006 3:33 pm

tselling wrote:I've been playing Oblivion without any hangs or crashes with the latest Lenovo drivers.
Do u think that I'm the only one who is facing this prblem :?: :?

christopher_wolf
Special Member
Posts: 5741
Joined: Sat Oct 08, 2005 1:24 pm
Location: UC Berkeley, California
Contact:

#26 Post by christopher_wolf » Tue May 30, 2006 5:05 pm

Qoz3a wrote:
tselling wrote:I've been playing Oblivion without any hangs or crashes with the latest Lenovo drivers.
Do u think that I'm the only one who is facing this prblem :?: :?
Nobody said that.

Teresa simply posted information about being ble to run Oblivion on Her system.
IBM ThinkPad T43 Model 2668-72U 14.1" SXGA+ 1GB |IBM 701c

~o/
I met someone who looks a lot like you.
She does the things you do.
But she is an IBM.
/~o ---ELO from "Yours Truly 2059"

Pascal_TTH
Senior Member
Senior Member
Posts: 668
Joined: Sun May 28, 2006 7:17 pm
Location: Liege, Belgium, Europe
Contact:

#27 Post by Pascal_TTH » Tue May 30, 2006 5:22 pm

If every game crash, it could be a memory issue. Download Memtest86+ http://www.memtest.org/
It's an iso, you burn a CD and boot on it. It will start memory tests... If any error, it's an memory issue.

Do you have updated your games with last patchs ?
Apple MacBook Pro MB133
T61p : Core 2 Duo T9300, Quadro FX 570m, 2GB CL4, 320GB, WUXGA
T60p : Core 2 Duo T7200, FireGL V5200, 2GB, 160GB, 14.1 SXGA+
T61 : Core 2 Duo T7300, Quadro NVS 140m, 2GB, 160GB, WXGA+

Retired : R61, T41p, T40p, X31, A31p, A30, X24, A21p, A20p

ehsu
Freshman Member
Posts: 80
Joined: Thu Feb 17, 2005 12:31 pm
Location: Toronto, ON

#28 Post by ehsu » Tue May 30, 2006 5:50 pm

DenTP4rm wrote:
ehsu wrote:Hi Den,

Sorry, I don't have a T60P so I cannot confirm your question. Based on previous posters in this thread, you will find posts confirmed that OmegaDriver works with FireGL cards.
Hey ehsu,
Thanks for the quick reply. I guess what I'm asking is, when you say "OmegaDriver" are you referring to the driver at the link you placed in the earlier email, i.e. http://www.omegadrivers.net/ati/win2k_xp.php ? I'm not familiar with the site and I couldn't find any other drivers specifically for mobile cards. Is it a one-driver-fits-all deal?
thanks,
Den
Yup, you are correct. The omega driver is the "one-driver-fits-all" deal.

Qoz3a
Posts: 15
Joined: Mon May 29, 2006 12:56 pm
Location: Kuwait

#29 Post by Qoz3a » Wed May 31, 2006 3:20 am

christopher_wolf wrote:
Qoz3a wrote: Do u think that I'm the only one who is facing this prblem :?: :?
Nobody said that.

Teresa simply posted information about being ble to run Oblivion on Her system.
I just want know if other facing this problem and thank you Teresa for your response..
gonna test memory thanx :)
Do you have updated your games with last patchs ?
my system is fully updated

Qoz3a
Posts: 15
Joined: Mon May 29, 2006 12:56 pm
Location: Kuwait

#30 Post by Qoz3a » Wed May 31, 2006 8:04 am

Solved :D

it was a ram issue , i removed the extra 1 gb ram and it worked just fine .. no more crashes ,, thanx everyone for ur support ..

i love this forum

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: BigT0ny and 3 guests