R51 - motherboards compatibility ?

R, A, G and Z series specific matters only
Post Reply
Message
Author
redas.sta
Posts: 1
Joined: Wed May 17, 2006 2:02 am

R51 - motherboards compatibility ?

#1 Post by redas.sta » Thu May 18, 2006 1:40 am

Hello,

I have got motherboard ( FRU 93P3784 ) from R51 ThinkPad ( 1829-9MG ). Its working ok except USB ports.
I found R51 ThinkPad ( 2888-47G) on ebay with faulty motherboard (93P4201) . Could it be possible to put my motherboard in faulty R51 from ebay ?
Thanks.

Red

underclocker
moderator
moderator
Posts: 4016
Joined: Wed Mar 23, 2005 3:52 pm
Location: Wash., D.C.

#2 Post by underclocker » Fri May 19, 2006 8:23 am

FYI, the IBM R51 hardware reference manual shows that 14" display models and 15" display models use the same size system board, so size shouldn't be an issue. There should be a firewire connector on the "working" system board, but not on the dead one, so I'm not sure if you can pop out a blanking plate to use it or if will just be covered.

Bottom line, it looks like it should work.
T510, i7-620m, NVidia, HD+, 8GB, 180GB Intel Pro 1500 SSD, Webcam, BT, FPR Home
T400s, C2D SP9400, Intel 4500MHD, WXGA+, 8GB, 160GB Intel X18-M G2 SSD, Webcam, BT, FPR Travel
Edge 14 Core i5 | Edge 15 Core i3 | Edge 15 Athlon II X2| Edge 15 Phenom II X4

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad R, A, G and Z Series”

Who is online

Users browsing this forum: No registered users and 2 guests