600e bios upgrade & memory issue

Older ThinkPads.. from the 600, the 7xx, the iSeries, 300, 500, the Transnote and, of course, the 701
Post Reply
Message
Author
clevelandibm
Posts: 1
Joined: Sun Jul 23, 2006 7:59 pm
Location: Cleveland Ohio

600e bios upgrade & memory issue

#1 Post by clevelandibm » Mon Jul 24, 2006 10:52 am

I have a 600E , model number 2645-????. Someone blacked out the last part of the model number. The date by the serial number says 04/99.

I was able to get it to accept 128 MB of memory, but not a second 128 MB. Is it a BIOS issue?

Using the F1 key, I will check the BIOS version.

Thank you in advance.
Jim Evans
Cleveland Ohio
Top
vanaya
Senior Member
Senior Member
Posts: 523
Joined: Tue Jul 26, 2005 5:21 pm
Location: Houston, TX
Contact:
Contact vanaya

#2 Post by vanaya » Mon Jul 24, 2006 12:20 pm

You can go to download and drivers at ibm.com to automatically detect your model #.

Is your memory pc66 or pc100?
Z61p (WUXGA)/2.16ghz/2gb/60gb, R51/1.8ghz/1gb/160gb, R40/1.5ghz/2gb/80gb, 600E/366mhz/416mb/20gb, Project R51 with SXGA+
Top
BillMorrow
*Senior* Admin
*Senior* Admin
Posts: 7155
Joined: Tue Apr 13, 2004 9:40 pm
Location: San Francisco -> Florida -> Georgia
Contact:
Contact BillMorrow

#3 Post by BillMorrow » Mon Jul 24, 2006 3:13 pm

the model number and serial number SHOULD also be in the bios..
look there..
F1 on bootup..
Bill Morrow, kept by parrots :parrot: & cockatoos
Sysop - forum.thinkpads.com

*
She was not what you would call refined,
She was not what you would call unrefined,
She was the type of person who kept a parrot.
~~~Mark Twain~~~
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad Legacy Hardware”

Who is online

Users browsing this forum: No registered users and 2 guests