Any info on the 360CS

Message

glenn778 · #1 Post by **glenn778** » Tue Aug 29, 2006 11:14 pm

I inherited a 360cs. I can find very little info on this machine. I went to ibm's site, they want to charge for the manual. I know it is a 486 machine, but nothing more. Any information on the machine and drivers available would be appreciated.

thanks,
Glenn778

#2 Post by **AlphaKilo470** » Wed Aug 30, 2006 12:03 am

Look at item number one in the forum's FAQ. You'll get a link to more information than you'll ever know what to do with.

tom lightbody · #3 Post by **tom lightbody** » Wed Aug 30, 2006 12:42 am

twbook pdf also good: thinkwiki, hardware specifications

leoblob · #4 Post by **leoblob** » Wed Aug 30, 2006 9:35 am

When I bought my 360 new in 1994 for just over $1800, I considered the 360Cs, but I couldn't afford $450 more for the color display

Here are the specs on the 360Cs: SL-enhanced 486sx33, VESA video bus, 4MB on-board. Max = 20MB, 9.5 inch DSTN display, 256 color, disk drive 170MB or 340MB

I may have drivers, etc, let me know what you need. Runs WIN 3.1 great, but even WIN95 on these is a bit of a stretch. If you max out the RAM (at 20MB) WIN95 would probably be OK for occasional use.

440roadrunner · #5 Post by **440roadrunner** » Wed Aug 30, 2006 10:20 am

Look at the sticky at the top of the "legacy" page, which will lead you here:

http://greyghost.dyndns.org/pccbbs/

Most anything you'll need is there. Some of the stuff for the 360 series is the same as the 755 series. I still have 3 old 360's, one of which was upgraded with an Evergreen chip. I still use them for programming radios and other "old" duties.

Click the "mobiles" folder, and read the index at the top of the list

vkim · #6 Post by **vkim** » Wed Aug 30, 2006 8:23 pm

I have a 360PE, which has specs closed to 360Cs. Though officially RAM is 20 Mb max, mine's got 36 Mb by using a 32 Mb card.
Just my 2 cent

leoblob · #7 Post by **leoblob** » Wed Aug 30, 2006 9:59 pm

440roadrunner wrote:I still have 3 old 360's, one of which was upgraded with an Evergreen chip.

Do you have any information, or a link, on how do to this?

440roadrunner · #8 Post by **440roadrunner** » Wed Aug 30, 2006 10:36 pm

No, sorry, I found the upgrade board a few years ago (nearly 10, already) on eBay. It was a board exchange deal--the cpu on the 360 series is soldered in.

On the aside, the other day I found a backback 24x parallel port CDROM at the thrift store, just like new, for 8 bucks

leoblob · #9 Post by **leoblob** » Thu Aug 31, 2006 9:57 am

440roadrunner wrote:... It was a board exchange deal--the cpu on the 360 series is soldered in...

Thanks. That's what I thought.

Any info on the 360CS

Any info on the 360CS

360cs info

Who is online