ac adaptor

R, A, G and Z series specific matters only
Post Reply
Message
Author
aaron158
Freshman Member
Posts: 54
Joined: Wed Jan 18, 2006 4:30 am
Location: Ontario

ac adaptor

#1 Post by aaron158 » Mon Sep 18, 2006 12:02 am

whats with the ac adaptors the the plugs into the laptop always get lose in side and then they it will just come out very easly or just moving it can stop it from working. is there a model made by ibm or a 3rd party ac adaptor that is better one that will lock in and not come lose.
Top
latnit1
Posts: 12
Joined: Sat Aug 26, 2006 8:57 am
Location: chennai

#2 Post by latnit1 » Mon Sep 18, 2006 1:16 pm

[u][b]Solution:[/b][/u]

1. Did u try using a new adaptor?
2. If the problem persists with the new 1 then the problem lies with the laptop pin.
3. U can check with IBM service center for the same. U might need to change it.
4. Do not buy any other brand of adaptor, IBM is the best. Using others might cost a new laptop.
5. It has a good lock and i just checked with mine.
Top
aaron158
Freshman Member
Posts: 54
Joined: Wed Jan 18, 2006 4:30 am
Location: Ontario

#3 Post by aaron158 » Mon Sep 18, 2006 2:54 pm

i did buy another one off ebay that said it was new and had the same thing after using it for like a month or so and i know its not the pin.
Top
latnit1
Posts: 12
Joined: Sat Aug 26, 2006 8:57 am
Location: chennai

#4 Post by latnit1 » Tue Sep 19, 2006 4:42 am

The problem could be with the male pin in your laptop. As you tried with the new adaptor, its not locking the female pin(Adaptor's). Do you lift your laptop frequently?.. If so you need to check that your not hurting the pin behind. Else you might need to replace the male pin. Mine is locking perfectly. what is the FRU of adaptor you are using and the model of IBM.
Top
Waukeen
Posts: 24
Joined: Fri Sep 08, 2006 9:00 pm

#5 Post by Waukeen » Tue Sep 19, 2006 8:23 pm

Funny thing is, Apple now advertises a loose fiting power connector as a feature.
A31 Config: 1.6Ghz processor, 2048MB ram, 30gb hd, DVD-RW/CD-RW, DVD-ROM
A20m Config: 700Mhz processor, 384MB ram, 30gb hd, internal wi-fi b/g, dvd/cd-rw
Top
Kendas
Posts: 40
Joined: Sun Jul 02, 2006 6:28 pm
Location: Tucson AZ
Contact:
Contact Kendas

#6 Post by Kendas » Wed Sep 20, 2006 12:35 am

Waukeen wrote:Funny thing is, Apple now advertises a loose fiting power connector as a feature.

That is a function of the magnetic inductive pickup being used by Apple for a power coupling.

The idea is not new and a physical connection is more efficent. Has nothing to do with being "loose".

Think of an isolation transformer.

No physical connection between the the input and output sides, just the magnetic field in the middle.

I know this is a "simplified" explanation but, look at it... It IS simple, theory looks complicated, not the hardware.
A30 2652-46U (used to be a 2654-BC2 Originally a 2652-35U)
15 inch XVGA 768MB, DVD 1-Dual layer R/W DVD 2 RO, Dock Ultrabay 2k Battery Modem daughter card, 802.11A/B/G...
And anything else I can stuff in.

Any one else here old enough to have used an IBM 029 Keypunch? :}
Top
Post Reply

Return to “ThinkPad R, A, G and Z Series”

Who is online

Users browsing this forum: No registered users and 6 guests