WTB: LCD ribbon Cable for T-series

Use this Forum for the ThinkPad hardware you have for sale or want to buy.
Sorry, no commercial sellers allowed here without asking Bill
Post Reply
Message
Author
gb
Junior Member
Junior Member
Posts: 255
Joined: Sat Oct 02, 2004 11:19 pm
Location: PA, USA

WTB: LCD ribbon Cable for T-series

#1 Post by gb » Thu Nov 02, 2006 1:49 pm

Anybody has one for reasonable price... please PM me your offer

(Specifically for 14.1" XGA T22)

Rgrds
Last edited by gb on Thu Nov 02, 2006 4:38 pm, edited 2 times in total.
Top
Orevin
Junior Member
Junior Member
Posts: 493
Joined: Fri Nov 11, 2005 11:33 am
Location: Chicago, IL

#2 Post by Orevin » Thu Nov 02, 2006 2:23 pm

Just any T-series or a specific one? :wink:

IBM TP T41p (1.7G/1GB/100GB-7k100/DVD-CDRW/SXGA+/BT)
IBM TP T22 (900/512/40/DVD/CDRW/14")
IBM TP A31 (1.8GHz/512MB/40GB/DVD-CDRW/15" SXGA)
For sale: n/a
WTB: n/a
Top
rkawakami
Admin
Admin
Posts: 10055
Joined: Sun Jun 04, 2006 1:26 am
Location: San Jose, CA 95120 USA
Contact:
Contact rkawakami

#3 Post by rkawakami » Thu Nov 02, 2006 3:51 pm

You also need to specify which version of LCD panel you are trying to connect to:

1) 13.3" XGA (cable FRU 27L0562)
2) 14.1" XGA (cable FRU 27L0640)
3) 14.1" SXGA+ (cable FRU 27L0590)

As you can see, each requires a different ribbon cable (according to the T2x Hardware Maintenance Manual).
Ray Kawakami
X22 X24 X31 X41 X41T X60 X60s X61 X61s X200 X200s X300 X301 Z60m Z61t Z61p 560 560Z 600 600E 600X T21 T22 T23 T41 T60p T410 T420 T520 W500 W520 R50 A21p A22p A31 A31p
NOTE: All links to PC-Doctor software hosted by me are dead. Files removed 8/28/12 by manufacturer's demand.
Top
gb
Junior Member
Junior Member
Posts: 255
Joined: Sat Oct 02, 2004 11:19 pm
Location: PA, USA

#4 Post by gb » Fri Nov 03, 2006 9:17 am

It was interesting. LCD shows all signs of bad backlight (very dimm picture, you can see image with flash light pointed to it only)

Replaced backlight.... same picture..... checked inverter.... same... swapped ribbon with another TP .... voala!

Now the original FRU: 27L0519 P/N:27L0490
But I guess ribbons from any 14" XGA T-series will work


Thanks
Top
UncleBunky
Posts: 7
Joined: Wed Sep 20, 2006 1:50 pm
Location: Glen Carbon, IL

#5 Post by UncleBunky » Mon Nov 06, 2006 4:07 pm

Did you have to remove the ribbon cable from that larger looking piece of plastic film on there? I am in need of a new ribbon cable and hinges for a TP570 w/a 13.3" XGA.
Nothing rhymes with orange.
Top
gb
Junior Member
Junior Member
Posts: 255
Joined: Sat Oct 02, 2004 11:19 pm
Location: PA, USA

#6 Post by gb » Mon Nov 06, 2006 5:06 pm

not sure what you are refering to, but it is one piece cable that connects inverter, mboard and LCD
Top
UncleBunky
Posts: 7
Joined: Wed Sep 20, 2006 1:50 pm
Location: Glen Carbon, IL

#7 Post by UncleBunky » Tue Nov 07, 2006 9:25 am

I'll try to take a photo of it tonight. Odds are I'm better off looking for one on eBay since I also need new hinges.
Nothing rhymes with orange.
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Marketplace - Forum Members only”

Who is online

Users browsing this forum: No registered users and 18 guests