Access Connections and new wireless card
Access Connections and new wireless card
I know ive seen a thread about this somewhere but i cant find it for the life of me. I was experiencing alot of dropped connections and weak signal strength with my intel wireless card so i decided to swap it out for an atheros card. It was recognized immediately and is working fine but i cannot get AC to see the card. So i am relegated to allowing windows to handle the wireless networking. Anyone know how to get AC using the new card? ive tried uninstalling and reinstalling AC but no luck.
-
Thinkpad760XD
- Posts: 23
- Joined: Thu Nov 09, 2006 7:05 am
- Location: NY
Uninstall and reinstall the following:
1 - Access Connections and location profiles
2 - Power Manager
3 - HotKey features
4 - Wireless LAN drivers
You probably did not do the bolded items above, since it is counter intuitive that one should have to uninstall those items.
1 - Access Connections and location profiles
2 - Power Manager
3 - HotKey features
4 - Wireless LAN drivers
You probably did not do the bolded items above, since it is counter intuitive that one should have to uninstall those items.
Last edited by EOMtp on Thu Nov 16, 2006 5:52 pm, edited 1 time in total.
EOMtp,
Worked perfectly! Thanks it is much appreciated.
Trolle,
I waited to answer your question about the signal strength because i wanted to compare them in AC and not while allowing windows to manage the connection. The atheros signal strengths are way higher than the IBM was, I have 4 WAP's in my house and while sitting in my kitchen I used to get 80% for WAP1, 70% WAP2 and 30% for WAP3, WAP4 never was recognized (Basement WAP) Now I am getting 100% WAP1, 100% WAP2, 80% WAP3 and 60% WAP4. I am also seeing several neighbors WAP's that I never saw before.
Worked perfectly! Thanks it is much appreciated.
Trolle,
I waited to answer your question about the signal strength because i wanted to compare them in AC and not while allowing windows to manage the connection. The atheros signal strengths are way higher than the IBM was, I have 4 WAP's in my house and while sitting in my kitchen I used to get 80% for WAP1, 70% WAP2 and 30% for WAP3, WAP4 never was recognized (Basement WAP) Now I am getting 100% WAP1, 100% WAP2, 80% WAP3 and 60% WAP4. I am also seeing several neighbors WAP's that I never saw before.
Weez,
Thanks for the response. I will certainly consider upgrading the wireless card in my X60. Hopefully it will remove the problems with dropped connections and AC as well.
Maybe you could post the seller you used? I checked Ebay but there were quite a few sellers of Atheros cards and I am unsure which one is the correct model and the latest version.
Thanks for the response. I will certainly consider upgrading the wireless card in my X60. Hopefully it will remove the problems with dropped connections and AC as well.
Maybe you could post the seller you used? I checked Ebay but there were quite a few sellers of Atheros cards and I am unsure which one is the correct model and the latest version.
Seller was teckwave_store his email is sales@teckwave.com, you can ask him if he has any of these available. This was the listing for my card but i dont see it listed anymore. When i purchased mine it said he had 40 available
40Y7026 Lenovo ThinkPad 11a/b/g Wireless LAN Mini-PCI
40Y7026 Lenovo ThinkPad 11a/b/g Wireless LAN Mini-PCI
-
redburgundy
- Freshman Member
- Posts: 91
- Joined: Thu Apr 27, 2006 12:25 pm
That's consistent with what I found when I put in the Atheros card.Weez wrote: I waited to answer your question about the signal strength because i wanted to compare them in AC and not while allowing windows to manage the connection. The atheros signal strengths are way higher than the IBM was, I have 4 WAP's in my house and while sitting in my kitchen I used to get 80% for WAP1, 70% WAP2 and 30% for WAP3, WAP4 never was recognized (Basement WAP) Now I am getting 100% WAP1, 100% WAP2, 80% WAP3 and 60% WAP4. I am also seeing several neighbors WAP's that I never saw before.
Does anyone know what Atheros version the ThinkPad 11a/b/g Wireless LAN (product #40Y7026) is?
I can't seem to find it and wanted to make sure that I was buying the most up-to-date hardware.
I read a press release on Atheros' website that Lenovo was going to install Atheros’ AR5008E-3NX LAN, but this was announced 12 days ago and I doubt I can find or afford this latest version.
Can only seem to find 40Y7026.
I can't seem to find it and wanted to make sure that I was buying the most up-to-date hardware.
I read a press release on Atheros' website that Lenovo was going to install Atheros’ AR5008E-3NX LAN, but this was announced 12 days ago and I doubt I can find or afford this latest version.
Can only seem to find 40Y7026.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
WTB W701 Parts Express Card or CF/Express Card Board
by MisterB » Mon Jun 19, 2017 4:43 pm » in Marketplace - Forum Members only - 1 Replies
- 116 Views
-
Last post by MisterB
Mon Jun 26, 2017 9:57 pm
-
-
-
T60 1952A97. WIRELESS LAN VS WIRELESS WAN CONFUSION.
by slaterlp » Sat Mar 04, 2017 12:16 pm » in ThinkPad T6x Series - 17 Replies
- 1371 Views
-
Last post by ajkula66
Fri Mar 10, 2017 6:31 am
-
-
-
Mxing wireless clients, AC and N, 3x3 and 2x2
by hhhd1 » Tue May 30, 2017 4:37 pm » in GENERAL ThinkPad News/Comments & Questions - 0 Replies
- 99 Views
-
Last post by hhhd1
Tue May 30, 2017 4:37 pm
-
-
-
FS: Dell TrueMobile 2300 Access Point/Router
by RealBlackStuff » Wed Feb 01, 2017 11:00 am » in Marketplace - Forum Members only - 0 Replies
- 233 Views
-
Last post by RealBlackStuff
Wed Feb 01, 2017 11:00 am
-
Who is online
Users browsing this forum: E350 and 4 guests





