T43p bluescreens after standby resume

[koolzero]

When I put my laptop into suspend on my docking station and then take it off the dock and resume from standby it blue screens.

How can I view the error dump from the blue screen?

[GomJabbar]

Perhaps others will relate different experiences, but from what I have seen, it is not wise to change hardware while in suspend mode with Windows XP. I suggest you resume from suspend before undocking, then suspend again after you have undocked your ThinkPad.

[christopher_wolf]

Most hardware changes during suspend are fine, the system should resume and operate normally (USB, docks, Ultrabay, etc); you can use dumpchk to check the info after you have tracked down the event in the EventLog.

[koolzero]

I've got the text from the kernel dump can I paste it here? It's rather long.

Here is the error log if anyone wants to take a look at it.
http://www.kevebrown.com/uploader/files ... 2-2007.txt

Thanks for any help!

[kchung]

Does this happen every time?

In any case, I would recommend running diagnostics on your system, particularly a RAM test. Does hibernate have the same issue if you hibernate while docked and wake up undocked?

Kevin