back ports from T23 to T21

T2x/T3x series specific matters only
Post Reply
Message
Author
grudziu
Posts: 2
Joined: Mon Jan 15, 2007 12:53 pm
Location: Poland

back ports from T23 to T21

#1 Post by grudziu » Mon Jan 15, 2007 2:03 pm

Hello!
I'm going to replace back ports in my T21 with back ports from T23.
Is it possible to make this replacement?
I want to buy this: http://www.allegro.pl/item157325145_ibm ... szta_.html
:)

rkawakami
Admin
Admin
Posts: 10053
Joined: Sun Jun 04, 2006 1:26 am
Location: San Jose, CA 95120 USA
Contact:

#2 Post by rkawakami » Mon Jan 15, 2007 2:19 pm

Welcome to thinkpads.com!

The T21 only has one USB port while the T23 has two. You would have to cut the back panel of the T21 base in order to access the second USB port on the T23 I/O board. That is the physical change which you may have to do. This assumes that the motherboard plug is the same between the two boards, which I do not know if that is true or not. Also, the I/O board has a connector which goes into the MiniPCI area. The ribbon cable used for this is different between the T21 and T23. Again, I do not know if you can simply use your existing cable in the T21 with the I/O board from the T23.

What is the main reason why you want to make this substitution? Just to get the second USB port? I did a quick search of the archives but I could not find any posts which asked this question.
Ray Kawakami
X22 X24 X31 X41 X41T X60 X60s X61 X61s X200 X200s X300 X301 Z60m Z61t Z61p 560 560Z 600 600E 600X T21 T22 T23 T41 T60p T410 T420 T520 W500 W520 R50 A21p A22p A31 A31p
NOTE: All links to PC-Doctor software hosted by me are dead. Files removed 8/28/12 by manufacturer's demand.

grudziu
Posts: 2
Joined: Mon Jan 15, 2007 12:53 pm
Location: Poland

#3 Post by grudziu » Mon Jan 15, 2007 3:01 pm

Q:What is the main reason why you want to make this substitution? Just to get the second USB port? I did a quick search of the archives but I could not find any posts which asked this question.

A: Second USB , ps/2 and LAN - my ps/2 port and LAN adapter are dead :/
ps/2 - third butoon , scroller , doesn't work,
LAN -xp doesn't see it.
But for me most important is 2nd USB. I have already USB hub x4 but it isn't comfortable and (for example) bluetooth with mouse and adsl modem cannot work at the same time :/ There are problems with current.

Thank you for answer :) Too many problems with this replacement.

alagregg
Posts: 45
Joined: Thu Sep 28, 2006 6:38 am
Location: Durham, United Kingdon

#4 Post by alagregg » Tue Jan 16, 2007 2:18 pm

replacing the back port is unlikley to fix your PS/2 or lan problems. (unless your problem stem from a damaged physical connection).

since you say your NIC (network card) is not found by windows this would suggest a more internal problem, which may require a new mini-pci card (or motherboard problem). Althougth i would suggest re-seating the mini-pci card first to check the connection.

i would also be skeptical as to whether the USB would work, as the T23 has a compleatly different mobo. Althougth i imagine the other T2x's may have unused USB's meant for a docking station.

If you are up for hacking an extra usb port, i personally have always considered the ultraport the ideal candidate on the T2x's as it is essentially a USB port already.
http://www.thinkwiki.org/wiki/UltraPort

you could simiply solder some wires on to the ultraport connector, run them back inside the laptop and then fit in a port somewhere (addmittedly easier said then done).

This may damage your thinkpad though, as could any hacking, so do this at your own risk

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T2x & T3x Series”

Who is online

Users browsing this forum: No registered users and 1 guest