LF: Travel bezel for T60 (part #: 13N5108)

Message

#1 Post by **gator** » Sun Feb 18, 2007 4:46 am

I will be on a traveling assignment soon and don't want to carry my DVD-RW with me. I am looking for a travel bezel (P/N: 13N5108) that will fit in my T60 which has the Ultrabay slim. Travel bezel need not be new. PM me with a price if you have one for sale.

dmichael · #2 Post by **dmichael** » Tue Mar 25, 2008 1:26 pm

Did you ever find one of these? is so, where?

#3 Post by **erik** » Tue Mar 25, 2008 2:52 pm

dmichael wrote:Did you ever find one of these? is so, where?

you can call IBM maintenance parts at 800-388-7080 (options 2:1:1) to order one.

#4 Post by **gator** » Wed Mar 26, 2008 10:53 am

dmichael wrote:Did you ever find one of these? is so, where?

I could not find it online anywhere or here. I finally got one (for free) when someone here bought a X61 with ultrabase and was about to discard it.

dmichael · #5 Post by **dmichael** » Wed Mar 26, 2008 11:00 am

I called the number above and ordered part #13N5108, I have a feeling it will be the curved version for T4x, not the flat one for T6x/ Z6x. We'll find out tomorrow when it arrives. I've read a lot of threads that claim this part number to be valid for both the flat and curved bezel versions. Part was $7.16 and shipping was $13.50, and they could not tell me if it would be the flat or curved one. I even got transferred to tech support and then back to sales and no one could say yea or nea so I rolled the dice.

pianowizard · #6 Post by **pianowizard** » Wed Mar 26, 2008 11:13 am

gator wrote:I finally got one (for free) when someone here bought a X61 with ultrabase and was about to discard it.

But that one is curved, right? I got one from a friend who also discarded it from her X61 ultrabase. I am using it in my HP nc2400!

#7 Post by **gator** » Wed Mar 26, 2008 11:57 am

pianowizard wrote:But that one is curved, right? I got one from a friend who also discarded it from her X61 ultrabase. I am using it in my HP nc2400!

True, it is not fully flat ... but it is not the same as the T4x travel bezel either. The part number printed on the inside of the bezel is
13N5108. Interesting to note that the X61 bezel fits in your HP nc2400.

dmichael, I wish you had contacted me through PM or something, I'd have given you the bezel for price of shipping.

pianowizard · #8 Post by **pianowizard** » Wed Mar 26, 2008 12:09 pm

gator wrote:Interesting to note that the X61 bezel fits in your HP nc2400.

It's not a perfect fit as it sticks out about 2 to 3 mm. I couldn't care less about that though.

#9 Post by **erik** » Wed Mar 26, 2008 2:27 pm

dmichael wrote:I called the number above and ordered part #13N5108, I have a feeling it will be the curved version for T4x, not the flat one for T6x/ Z6x. We'll find out tomorrow when it arrives. I've read a lot of threads that claim this part number to be valid for both the flat and curved bezel versions. Part was $7.16 and shipping was $13.50, and they could not tell me if it would be the flat or curved one. I even got transferred to tech support and then back to sales and no one could say yea or nea so I rolled the dice.

13N5108 is listed in both the T4x and T6x hardware maintenance manuals so there's a good chance it will be curved. however, i doubt you or anyone else will ever notice it.

i use a T4x PATA HDD adapter with my T61p on occasion and the curved bezel doesn't look that bad. it's a functional piece anyway.

DesertSilver · #10 Post by **DesertSilver** » Thu Mar 27, 2008 1:21 pm

Can someone post some pictures of the travel cover in a T61?

#11 Post by **gator** » Thu Mar 27, 2008 4:20 pm

DesertSilver wrote:Can someone post some pictures of the travel cover in a T61?

I'll do it tomorrow.

dmichael · #12 Post by **dmichael** » Thu Mar 27, 2008 4:40 pm

I got the shipment today, it is indeed the non-flat version to fit T4x instead of the flat version to fit the T6x that I had hoped for. Oh well, it's not that big of a deal.

DesertSilver · #13 Post by **DesertSilver** » Thu Mar 27, 2008 4:43 pm

dmichael wrote:I got the shipment today, it is indeed the non-flat version to fit T4x instead of the flat version to fit the T6x that I had hoped for. Oh well, it's not that big of a deal.

I'm wanting to order one through Lenov also but I want to see how noticeable the "curved" version is in a T61. Everyone says it's hardly noticeable and I'm sure it is but just want to see a picture.

Can you post pics?

#14 Post by **erik** » Thu Mar 27, 2008 6:10 pm

do they even make a flat version?

SHoTTa35 · #15 Post by **SHoTTa35** » Fri Mar 28, 2008 8:50 am

i'm wondering that too as i had one for my T42 and using it now in my T60 but still just curious about the T60 version?

pianowizard · #16 Post by **pianowizard** » Fri Mar 28, 2008 9:18 am

erik wrote:do they even make a flat version?

Even if they do, I think it's better to get the curved one, which would fit both the T4* and the T6*. The flat one (assuming it exists) wouldn't be good for the T4* because its bottom corner would stick out. I would rather have a bezel that curves in rather than sticks out. Someday you might have a T4*.

davidspalding · #17 Post by **davidspalding** » Thu May 15, 2008 11:14 am

I'm guessing a Second HDD Adapter for the T6x series will be the right shape, but that's a pricey way to get a UltraBay blank (though you can then put in a HDD for more strorage, performance, etc.)

The place I work, they throw out the bezels from the X61 bases, and I grab them when I can. Still trying to decide what to do with them. (They toss out the Ultrabay travel bags, too.)

SHoTTa35 · #18 Post by **SHoTTa35** » Thu May 15, 2008 7:53 pm

what?

Get me one of those bags! I have one for my floppy and one for my CDRW/DVD combo but none for my DVDRW

(hehe, yeah.. i don't really need one but i'd take one anyways

)

LF: Travel bezel for T60 (part #: 13N5108)

LF: Travel bezel for T60 (part #: 13N5108)

Who is online