x60 8 cell case: axio? shinza zeroshock?

X60/X61 series specific matters only.
Post Reply
Message
Author
turbogoose
Posts: 4
Joined: Wed Feb 14, 2007 12:15 pm
Location: baltimore

x60 8 cell case: axio? shinza zeroshock?

#1 Post by turbogoose » Tue Feb 20, 2007 12:17 am

hello! i just got my x60 8 cell last week and i'm excited to take it around without a power cord :) all i need now is a case... i'm looking for something semi-hard (much like the shinza zeroshock) or hard, that is as small as possible (preferably without handles or extra flaps, etc)

i'm under the impression from these forums that the 12" zeroshock fits the 8 cell snugly, but i just wanted to see if there were any similar options out there.

has anyone used any of these?

axio 13.3" macbook hardsleeve (http://axio-usa.com/downloads/HARDSLEEVE.pdf)

booq vyper xs (on closeout!!!! 4.99!!!!) or any of the other booq cases? (http://booqbags.com/s.nl/it.A/id.81/.f)

thanks everyone so much in advance!

adrea

jck8r
Posts: 15
Joined: Sat Feb 17, 2007 4:59 pm
Location: Richmond, Virginia

#2 Post by jck8r » Tue Feb 20, 2007 10:09 am

I heard that both the X60 or X60 tablet with 8 Cell battery will not fit in the 12" Zero Shock III case-can anyone correct me if I'm wrong? Someone actually wrote that they used a 14" case that fit both the laptop and the charger in the case, but that seems a tad annoying and the charger might shift around scratching the laptop. Perhaps someone can confirm if the 13" zero shock case is a better fit with either the x60 or x60 tablet with 8 Cell battery attached?

Users on these forums seem to have a lot of experience so I hope to see some replies as well!

-James

----Yes I too wish someone with any experience would reply! I'd love to have a zip up case-------~!!!!
Last edited by jck8r on Thu Feb 22, 2007 11:04 pm, edited 1 time in total.

turbogoose
Posts: 4
Joined: Wed Feb 14, 2007 12:15 pm
Location: baltimore

#3 Post by turbogoose » Thu Feb 22, 2007 8:01 pm

bumpity bumpity... someone's gotta know! :(

iMav
Sophomore Member
Posts: 129
Joined: Sun Feb 04, 2007 8:11 am
Location: Columbus, WI
Contact:

#4 Post by iMav » Fri Feb 23, 2007 1:54 am

I've got a 13" ZeroShock case. Send me a x60 and I'll test it out. :)

(actually, I'm looking to buy a X60, so if you don't find out beforehand, perhaps I can let you know in a month)

DavidE
Posts: 29
Joined: Mon Sep 27, 2004 12:33 pm
Location: East Coast, U.S.

#5 Post by DavidE » Fri Feb 23, 2007 11:07 am

jck8r wrote:I heard that both the X60 or X60 tablet with 8 Cell battery will not fit in the 12" Zero Shock III case-can anyone correct me if I'm wrong?
Not sure about the X60 or X60T, but I just purchased a Shinza 12-inch ZeroShock III sleeve, and it fits the X60s with 8-cell battery. There's about a half-inch to spare on each of three sides, and I have no problem zipping it up.

I also have one of the original 11-inch ZeroShock sleeves, which is a very tight fit for my X60s when equipped with a slim 4-cell battery. It's a great combination if you know you'll be using the notebook for only an hour or two.

DavidE
www.davidenglish.com
www.beepzoid.com

jck8r
Posts: 15
Joined: Sat Feb 17, 2007 4:59 pm
Location: Richmond, Virginia

#6 Post by jck8r » Fri Feb 23, 2007 6:24 pm

Perhaps with that 1/2 inch the X60 and X60 tablet with 8 cell might fit...GOsh I wish we had confirmation this is exactly the combo I want =D

NApP
Posts: 1
Joined: Sat Feb 24, 2007 2:03 am
Location: Chicago, IL

#7 Post by NApP » Sun Feb 25, 2007 3:52 pm

I'm the owner of a x60 1706-86U and the original 12inch Shinza ZeroShock Sleeve. The laptop fits nicely with the 8cell battery. The dimensions for the old and new III are very close, so it seems the new design will also fit nicely.

Here are the dimensions:
OLD(mine):
Exterior dimensions (W x D x H): 12.40 x 0.98 x 10.43 inches (315 x 25 x 265 mm)
Interior dimensions (W x D x H): 11.42 x 1.57 x 9.45 inches (290 x 40 x 240 mm)

New(III):
Exterior dimensions (W x D x H): 12.4 x 1.0 x 10.6 inches (315 x 25 x 270 mm)
Interior dimensions (W x D x H): 11.4 x 1.6 x 9.4 inches (290 x 40 x 240 mm)

turbogoose
Posts: 4
Joined: Wed Feb 14, 2007 12:15 pm
Location: baltimore

update

#8 Post by turbogoose » Sun Feb 25, 2007 11:18 pm

hello all,

thanks for the helpful replies. since i'm too impatient to wait for any insight on the axio or booq, i just went ahead and bought the booq vyper xs. it was $4.99 after all. $4.99!!! it has similar dimensions to the zeroshock:

zeroshock interior: 11.4x1.6x9.4
booq interior: 11.2x 1.4x 9.1

and since there seems to be a little wiggle room for the 8cell in the zeroshock, i went ahead and ordered the booq. the only thing NOT cool was that shipping was 9.16.... !!!! what?! ::sigh::

anyways, i'll let you guys know what happens. if it turns out to be a good fit, hopefully someone else will get to enjoy the good deal too!!

ylim
Freshman Member
Posts: 73
Joined: Thu Mar 01, 2007 8:13 am
Location: Melbourne, Australia

#9 Post by ylim » Sat Mar 03, 2007 9:26 am

NApP wrote:I'm the owner of a x60 1706-86U and the original 12inch Shinza ZeroShock Sleeve. The laptop fits nicely with the 8cell battery. The dimensions for the old and new III are very close, so it seems the new design will also fit nicely.

Here are the dimensions:
OLD(mine):
Exterior dimensions (W x D x H): 12.40 x 0.98 x 10.43 inches (315 x 25 x 265 mm)
Interior dimensions (W x D x H): 11.42 x 1.57 x 9.45 inches (290 x 40 x 240 mm)

New(III):
Exterior dimensions (W x D x H): 12.4 x 1.0 x 10.6 inches (315 x 25 x 270 mm)
Interior dimensions (W x D x H): 11.4 x 1.6 x 9.4 inches (290 x 40 x 240 mm)
Hi there, thanks for your note above.
1. Did you made a mistake?
OLD(mine):
Exterior dimensions (W x D x H): 12.40 x 0.98 x 10.43 inches (315 x 25 x 265 mm)
Interior dimensions (W x D x H): 11.42 x 1.57 x 9.45 inches (290 x 40 x 240 mm)
How can the internal D is bigger than exterior?

2. Can you please advise me the precise x60 with 8 cells dimensions (in cm)?

Thank you.

turbogoose
Posts: 4
Joined: Wed Feb 14, 2007 12:15 pm
Location: baltimore

vyper xs

#10 Post by turbogoose » Sun Mar 04, 2007 12:09 pm

hi guys,

got my vyper xs in the mail 2 days ago, and i'm pretty happy with it. the lenght and width dimensions fit the 8cell x60 perfectly - no shifting about. the only thing that i think could be better is that there is a bit of extra height in between the case and the computer when when it's all zipped up (as in, it's not shifting around length or width-wise, but there's extra space height-wise). the case is not as thick as the zeroshock, but it's got a semi hard shell lined with a material similar to the zeroshock (foam that sort of keeps a dimple if you press a finger into it).

i haven't seen the 12" zeroshock with the 8cell, so i don't know how that fits, but the fit of the vyper and the 8cell is definitely not as snug as how the 11" zeroshock fits with the 4 cell (if you guys have seen that at all). however, for the price, i'm super happy with this case :)


take care,
a

sxr71
Posts: 45
Joined: Thu Aug 24, 2006 5:33 am
Location: New York

#11 Post by sxr71 » Mon Mar 26, 2007 2:44 am

I just picked up both a Viper XS and a Viper XXS for $10 total, thanks to you!

I think the XXS will be for days I travel with the slim 4 cell and the XS for days with the 8-cell.

bonmot
Posts: 25
Joined: Wed Mar 14, 2007 9:05 pm
Location: Chicago, IL

#12 Post by bonmot » Mon Mar 26, 2007 6:22 am

sxr71 wrote: I think the XXS will be for days I travel with the slim 4 cell and the XS for days with the 8-cell.
That's exactly what I do. I'm pleased with the fit that these too Booq Vipers give me with my x60s. For $5 each, they are a great deal (shipping sucks, though). However, I find it hard to believe that people were paying $50 for these. $20-$30: maybe, but not $50.
Thinkpad X60s / 1.66 GHz Core Duo / 2 GB RAM / 100 GB 7,200 RPM HD/ Bluetooth / Atheros WiFi/ 8 cell + 4 cell slim / Win XP Home

Kwak
Posts: 17
Joined: Tue Aug 29, 2006 6:15 am
Location: Los Angeles, CA

Re: vyper xs

#13 Post by Kwak » Tue Mar 27, 2007 1:41 am

Thanks for sharing info about the deal and the review. Ordered one just now.
turbogoose wrote:hi guys,

got my vyper xs in the mail 2 days ago, and i'm pretty happy with it. the lenght and width dimensions fit the 8cell x60 perfectly - no shifting about. the only thing that i think could be better is that there is a bit of extra height in between the case and the computer when when it's all zipped up (as in, it's not shifting around length or width-wise, but there's extra space height-wise). the case is not as thick as the zeroshock, but it's got a semi hard shell lined with a material similar to the zeroshock (foam that sort of keeps a dimple if you press a finger into it).

kimo
Freshman Member
Posts: 106
Joined: Mon Apr 02, 2007 9:33 pm
Location: New York, New York

#14 Post by kimo » Tue Apr 03, 2007 8:41 am

i jumped on this too. enter the coupon code "pbzone07" for an extra 10% off.
-kimo
X60 1709-CTO

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad X6x Series incl. X6x Tablet”

Who is online

Users browsing this forum: E350 and 3 guests