F1? for testing

Older ThinkPads.. from the 600, the 7xx, the iSeries, 300, 500, the Transnote and, of course, the 701
Post Reply
Message
Author
maktecsales
Posts: 5
Joined: Sat Apr 07, 2007 1:17 pm
Location: Portage, In. USA

F1? for testing

#1 Post by maktecsales » Sat Apr 07, 2007 4:49 pm

On these units, (600's) what is used to go to bios or test mode?
Or what is the web page that tells this information for other models also?
Thanks
george

New to IBM thinkpads
Top
tfflivemb2
Moderator1
Moderator1
Posts: 5532
Joined: Thu Sep 01, 2005 1:17 pm
Location: Wisconsin
Contact:
Contact tfflivemb2

#2 Post by tfflivemb2 » Sat Apr 07, 2007 5:46 pm

While the system is completely off, press the power switch and begin pressing F1 repeatedly.
Top
vanaya
Senior Member
Senior Member
Posts: 523
Joined: Tue Jul 26, 2005 5:21 pm
Location: Houston, TX
Contact:
Contact vanaya

#3 Post by vanaya » Sun Apr 08, 2007 7:45 pm

You can get the Hardware Maintenance Manual here. Or you can go the lenovo website and let them detect your system for any other documents / drivers. And welcome to the forum!!
Z61p (WUXGA)/2.16ghz/2gb/60gb, R51/1.8ghz/1gb/160gb, R40/1.5ghz/2gb/80gb, 600E/366mhz/416mb/20gb, Project R51 with SXGA+
Top
Post Reply

Return to “ThinkPad Legacy Hardware”

Who is online

Users browsing this forum: No registered users and 2 guests