SC Card reader not functioning

X60/X61 series specific matters only.
Post Reply
Message
Author
villanim
Posts: 3
Joined: Thu Apr 19, 2007 12:34 pm
Location: Detroit, MI

SC Card reader not functioning

#1 Post by villanim » Thu Apr 19, 2007 3:28 pm

My firm just purchased 20 X60s models 1702-3QU. We wiped the hard drives clean and installed our own hardware independent image on them that we built using Altiris. Everything works fine with the exception of the SD card (will not read). I have downloaded the lateste driver from Lenovo's site and any SD card does not display in windows explorer (you do not even hear the Windows chime when inserting the card). Any thoughts as to what could be causing this? BTW - we only have the minimum amount of Lenovo utilities installed (no Think Vantage software), fingerprint reader is installed and working, the Fn key and magnifier software and that is about it.
Top
figuerc
Posts: 25
Joined: Tue Apr 10, 2007 9:24 pm
Location: Toronto Canada

#2 Post by figuerc » Thu Apr 19, 2007 5:17 pm

They only work with SD cards, not MMC - i made that mistake.
Top
villanim
Posts: 3
Joined: Thu Apr 19, 2007 12:34 pm
Location: Detroit, MI

#3 Post by villanim » Thu Apr 19, 2007 8:15 pm

figuerc wrote:They only work with SD cards, not MMC - i made that mistake.
Where in my post did I say I tried to insert a MMC card into the SD slot? I do know the difference between SD, MMC, XD, Micro SD< Mini SD, CF and any other format you care to mention.
Top
figuerc
Posts: 25
Joined: Tue Apr 10, 2007 9:24 pm
Location: Toronto Canada

#4 Post by figuerc » Thu Apr 19, 2007 8:21 pm

It was just a suggestion, they look the same.
Top
dorin
Junior Member
Junior Member
Posts: 363
Joined: Thu Jan 12, 2006 6:24 am
Location: Zürich, Switzerland
Contact:
Contact dorin

#5 Post by dorin » Thu Apr 19, 2007 8:35 pm

now i dont know if x60s reads sdhc, but try with a card which for sure ain't sdhc (smaller than 2gb)
i get the same simptoms if i insert a sdhc card into the sd port. and check that the sd reader/slot its switchd on...
X40 (2386H6G) 1.4Ghz 1.5Gb 40Gb
Top
pianowizard
Senior ThinkPadder
Senior ThinkPadder
Posts: 8368
Joined: Tue Jun 28, 2005 5:07 am
Location: Ann Arbor, MI
Contact:
Contact pianowizard

#6 Post by pianowizard » Thu Apr 19, 2007 9:16 pm

Another suggestion: did you push the card all the way in? I've had two SD card readers that I thought were not reading my cards, but it turned out I just had to push the cards much harder.
Microsoft Surface 3 (Atom x7-Z8700 / 4GB / 128GB / LTE)
Dell OptiPlex 9010 SFF (Core i3-3220 / 8GB / 8TB); HP 8300 Elite minitower (Core i7-3770 / 16GB / 9.25TB)
Acer T272HUL; Crossover 404K; Dell 3008WFP, U2715H, U2711, P2416D; Monoprice 10734; QNIX QHD2410R; Seiki Pro SM40UNP
Top
Athlex
Posts: 14
Joined: Tue Apr 17, 2007 7:35 pm
Location: San Francisco, CA

#7 Post by Athlex » Thu Apr 19, 2007 10:05 pm

With an SD card inserted, try the disk management snap-in in management console. Windows may be able to see the SD-reader, but hasn't assigned it a drive letter.
Top
villanim
Posts: 3
Joined: Thu Apr 19, 2007 12:34 pm
Location: Detroit, MI

#8 Post by villanim » Fri Apr 20, 2007 11:11 am

Athlex wrote:With an SD card inserted, try the disk management snap-in in management console. Windows may be able to see the SD-reader, but hasn't assigned it a drive letter.
I tried that, and does not show up in disk management. I am starting to think there is a problem with the image build.
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad X6x Series incl. X6x Tablet”

Who is online

Users browsing this forum: el-sahef and 5 guests