Base software Administrator error ...

Performance, hardware, software, general buying and gaming discussion..
Post Reply
Message
Author
mnezor
Posts: 29
Joined: Sat Apr 14, 2007 4:30 pm
Location: Athens, HELLAS

Base software Administrator error ...

#1 Post by mnezor » Sun Jun 10, 2007 5:06 am

I want to try a clean or custom install of winXP pro with this tool:
Base Software Administrator but when I start the program I get an error message '' The version of the recovery program within this computer's service partition does not support customizations'' . . . I think I have to update the recovery program of the service partition but how i can do this...


Thanks in advance !!!

p.s. I got already installed rescue and recovery 4.
R60 : T2400(1.83GHz), 1GB RAM, 80GB HD, 15in 1400x1050 LCD, 128MB ATI Radeon X1400, CDRW/DVDRW, Intel 802.11abg wireless, Bluetooth/Modem, 1Gb Ethernet, UltraNav, Fingerprint reader, IEEE 1394, 6c Li-Ion batt, WinXP Pro
Top
wackydan
Sophomore Member
Posts: 157
Joined: Mon Jun 20, 2005 10:01 pm

#2 Post by wackydan » Wed Jun 13, 2007 2:14 pm

The tool is only supported on 60 series systems that shipped after July of 2006....

When did you get your R60?
Top
mnezor
Posts: 29
Joined: Sat Apr 14, 2007 4:30 pm
Location: Athens, HELLAS

#3 Post by mnezor » Thu Jun 14, 2007 2:28 pm

Thanks for your reply !

l bought the thinkpad before 3 months... but I dont know how many months the store have it there... :roll:

Is it a way to know when my thinkpad shipped ?
R60 : T2400(1.83GHz), 1GB RAM, 80GB HD, 15in 1400x1050 LCD, 128MB ATI Radeon X1400, CDRW/DVDRW, Intel 802.11abg wireless, Bluetooth/Modem, 1Gb Ethernet, UltraNav, Fingerprint reader, IEEE 1394, 6c Li-Ion batt, WinXP Pro
Top
wackydan
Sophomore Member
Posts: 157
Joined: Mon Jun 20, 2005 10:01 pm

#4 Post by wackydan » Mon Jun 25, 2007 5:18 pm

Chances are, with that error, it's an older system.

You can contact Lenovo to see if they will send you a recovery set for free.... or $45.

THey update the recovery media every few months, and it is likely that the updated media will now support the tool or even have it built in.
Top
ryengineer
Moderator Emeritus
Moderator Emeritus
Posts: 4393
Joined: Wed Sep 20, 2006 9:29 pm
Location: L.A. (home town) CA, Toronto ON.

#5 Post by ryengineer » Mon Jun 25, 2007 5:26 pm

mnezor wrote: Is it a way to know when my thinkpad shipped ?
You can find the manufacturing Year/Month beside the serial number on the bottom of your thinkpad.
"I've come a long, long way," she said, "and I will go as far,
With the man who takes me from my horse, and leads me to a bar."
The man who took her off her steed, and stood her to a beer,
Were a bleary-eyed Surveyor and a DRUNKEN ENGINEER.
Top
mnezor
Posts: 29
Joined: Sat Apr 14, 2007 4:30 pm
Location: Athens, HELLAS

#6 Post by mnezor » Tue Jun 26, 2007 4:07 pm

ryengineer wrote:
mnezor wrote: Is it a way to know when my thinkpad shipped ?
You can find the manufacturing Year/Month beside the serial number on the bottom of your thinkpad.
It wriites 06/10 so I supposed shipped after July 2006 :)

The news is that I find an older version of B.S.Administrator , version 1 (now it is 1.1 ) and It works great .... but ... when I tried to recovery the system (when system boot -press thinkvantage button ) it tries to find the X: drive , but my recovery partition is Z: and then stops...

Any ideas?

thank you very much!
R60 : T2400(1.83GHz), 1GB RAM, 80GB HD, 15in 1400x1050 LCD, 128MB ATI Radeon X1400, CDRW/DVDRW, Intel 802.11abg wireless, Bluetooth/Modem, 1Gb Ethernet, UltraNav, Fingerprint reader, IEEE 1394, 6c Li-Ion batt, WinXP Pro
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad - General HARDWARE/SOFTWARE questions”

Who is online

Users browsing this forum: No registered users and 7 guests