My screen is broken and I'm planning on buying a replacement off ebay...
How I tell what I've currently got?
Or doesnt it matter what screen I buy as long as it comes with the whole lot including inverter etc?
XGA or SXGA screen - how do u tell?
-
psychocandy
- Posts: 25
- Joined: Thu May 24, 2007 3:18 am
- Location: Newport, Wales
-
jkahng
- Sophomore Member
- Posts: 210
- Joined: Wed Feb 07, 2007 9:57 am
- Location: Seoul, Korea / California
you need to figure out what's wrong with it first.
1. the graphics chip might be broken : you can check by trying an external monitor. if you get nothing, you most likely need a new board.
2. if the gpu is ok, then you have to look at the lcd screen itself which consists of the panel, inverter card, cable. there are diffrent symptoms to each failure so you need to state specifics of the malfunction (like you get a blank white screen, the color is yellow or reddish, lines on the screen etc...)
once you know what's wrong, you can purchase the parts off of ebay or local place...
as for finding out what type of lcd you have, there is a machine type on the bottom of your tp that goes like this #### @@@.
google this machine type and you'll find the screen type.
good luck.
1. the graphics chip might be broken : you can check by trying an external monitor. if you get nothing, you most likely need a new board.
2. if the gpu is ok, then you have to look at the lcd screen itself which consists of the panel, inverter card, cable. there are diffrent symptoms to each failure so you need to state specifics of the malfunction (like you get a blank white screen, the color is yellow or reddish, lines on the screen etc...)
once you know what's wrong, you can purchase the parts off of ebay or local place...
as for finding out what type of lcd you have, there is a machine type on the bottom of your tp that goes like this #### @@@.
google this machine type and you'll find the screen type.
good luck.
Z61M(9541-5HK) T7200, 3.0gb ram, X1400, 500gb 7200rpm HDD, Windows 7, Advanced mini dock
T400 2765-82u T9800 8gb ram, crucial M ssd, windows 7, Advanced mini dock
T400 2765-82u T9800 8gb ram, crucial M ssd, windows 7, Advanced mini dock
-
psychocandy
- Posts: 25
- Joined: Thu May 24, 2007 3:18 am
- Location: Newport, Wales
screen is physically cracked/damaged....jkahng wrote:you need to figure out what's wrong with it first.
1. the graphics chip might be broken : you can check by trying an external monitor. if you get nothing, you most likely need a new board.
2. if the gpu is ok, then you have to look at the lcd screen itself which consists of the panel, inverter card, cable. there are diffrent symptoms to each failure so you need to state specifics of the malfunction (like you get a blank white screen, the color is yellow or reddish, lines on the screen etc...)
once you know what's wrong, you can purchase the parts off of ebay or local place...
as for finding out what type of lcd you have, there is a machine type on the bottom of your tp that goes like this #### @@@.
google this machine type and you'll find the screen type.
good luck.
I'm still using it at the mo but theres a huge crack across the middle !!!
2373-KG9. thanks !!!!
XGA -
http://www-307.ibm.com/pc/support/site. ... y=2373-KG9
http://search-desc.ebay.com/search/sear ... age=search
Dimitri has a whole LCD assembly for $195. He's a member here as well. It is definately easier to replace the entire assembly.
http://www-307.ibm.com/pc/support/site. ... y=2373-KG9
http://search-desc.ebay.com/search/sear ... age=search
Dimitri has a whole LCD assembly for $195. He's a member here as well. It is definately easier to replace the entire assembly.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
T22 SXGA+ Screen cables - Same as the XGA one?
by T3f4l » Wed Feb 01, 2017 5:30 pm » in ThinkPad T2x & T3x Series - 1 Replies
- 1251 Views
-
Last post by ajkula66
Wed Feb 01, 2017 6:34 pm
-
-
-
WTB: t61 14.1 4:3 xga or sxga+
by darrenb » Wed Feb 22, 2017 4:43 am » in Marketplace - Forum Members only - 6 Replies
- 600 Views
-
Last post by TuuS
Mon Mar 27, 2017 8:23 pm
-
-
- 15 Replies
- 1867 Views
-
Last post by Mike Pickwick
Thu Apr 06, 2017 8:12 pm
-
-
How Can I Tell If T400 is in "Dual Channel Mode"?
by jimwg » Sat Apr 15, 2017 3:36 am » in ThinkPad R, A, G and Z Series - 6 Replies
- 780 Views
-
Last post by shawross
Sat Apr 15, 2017 8:08 pm
-
Who is online
Users browsing this forum: No registered users and 5 guests




