Dual Monitor with Mini-Dock

T4x series specific matters only
Post Reply
Message
Author
Porsche
Freshman Member
Posts: 55
Joined: Fri Apr 30, 2004 9:25 am

Dual Monitor with Mini-Dock

#1 Post by Porsche » Thu Oct 21, 2004 10:36 am

I have a T42p attached to a mini-dock. Is it possible to run two monitors using the DVI and regular video ports at the same time? I have attached one monitor to the DVI port and a second monitor to the regular video-out port at the back of the mini-dock. Only the monitor attached to the regular video-out port will be recognized. Is there something else I can be doing in order to get both monitors to be recognized and working, or is this not possible? Thanks.

gcchatel
Sophomore Member
Posts: 151
Joined: Thu Aug 26, 2004 4:38 pm
Location: Chapel Hill, NC
Contact:

#2 Post by gcchatel » Thu Oct 21, 2004 9:06 pm

It is not possible, you can only use one of the VGA or DVI ports on the back. The alternative is another docking station that comes with a mini-pci slot, you can put a graphics card in there and run a dual display. This is quite costly though. Just do what I do and use the LCD and one other monitor. It works great!

Gael
Last edited by gcchatel on Fri Oct 22, 2004 3:11 pm, edited 1 time in total.
Image T42p 2373-GVU
www.originvisual.com

Razorback
Posts: 21
Joined: Wed May 05, 2004 6:46 pm
Location: Northwest Arkansas

#3 Post by Razorback » Thu Oct 21, 2004 10:27 pm

That is not correct. There are NO Thinkpads with DVI output directly on the notebook.

The T42p will definitely drive the DVI of the mini-dock.

However, to answer gcchatel's question, no you cannot connect a monitor to both the DVI and the analog port. It is one or the other.

My suggestion is to connect a good flat panel to the DVI and run your notebook's screen as your second display. Works great.

Greg

frh
Posts: 2
Joined: Fri Oct 22, 2004 8:33 am

yes it is possible

#4 Post by frh » Sat Oct 23, 2004 4:46 pm

Yes it is possible. My T42p with a dock 2 is connected to 2 Eizo Flexcsan 985lx. one to the dvi port, the other to the analog port
providind an extended desktop with 2x 1600x1200.
Fred

dpb
Posts: 49
Joined: Thu Aug 12, 2004 2:36 pm

#5 Post by dpb » Sun Oct 24, 2004 10:54 pm

frh:

Terrific. What video card are you running?

frh
Posts: 2
Joined: Fri Oct 22, 2004 8:33 am

ati Mobility Fire GL T2

#6 Post by frh » Tue Oct 26, 2004 4:47 am

My video card is a ATI Mobility GL T2 with 128 MB

Nebelfelsen
Freshman Member
Posts: 52
Joined: Fri Dec 03, 2004 1:18 pm
Location: NRW, Germany

#7 Post by Nebelfelsen » Fri Dec 03, 2004 1:28 pm

I am using a Dock II in combination with Matrox Millenium G450 DualHead PCI graphic card (32 MB RAM).

Unfortunately, this card doesn't support 2x 1600x1200dpi @ 85 Hz @ 32 bit, so I had to change the monitor settings to 24 bit to get 84Hz on the first and 85 Hz on the second screen (both @ 1600x1200).

TFT-Display should work fine and with a lower resoultion it should work at 32bit with crt monitors too.

BTW: Does anyone know a PCI graphic card with dual screen support and more than 32 MB RAM?
I am also wondering why it isn't possible to activate the internal ATI graphic card at the same time the thinkpad is in the dock. Is this possible by changing some settings perhaps?

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T4x Series”

Who is online

Users browsing this forum: No registered users and 7 guests