i1400 LCD questions

[kurgan]

Hi, as you can see in my signature I have an i1400 2611-451 PII (i think) 300mhz, and a 13.3" LCD. I was wondering if a 14.1" from the 2611 series would work? My brother has a 2621 that he upgraded to 14.1", and he didn't order his LCD model specific, just 2621 specific. The particular LCD i'm looking at came on series 1400/1500, machines type 2611 - 412, 452, 456, 472, 40x, 47F, 476, 43x (excluding 434 and 435), 496, 512, and 552. I may be wishful thinking, but I would love to make this happen. Any and all coments, and suggestions are welcome.
Thanks,
Justin Payne

[kurgan]

Anybody? Comments, Thoughts, or ideas welcome. I would hate to buy this thing and it not work.
Thanks,
Justin

[kurgan]

Well, for those of you just browsing i'll add some food for thought (maybe provoke some replies). If you check IBM's website under Parts Information for the 2611-451 and 2611-452, you'll see that they both used the same 12.1" LCD(takes a little digging to notice). This info leads me to believe that the mainboard LCD outputs for these machines are wired the same. I think that the 14" LCD unit will work with my -451, the worst scenario being that I may also need the LVDS board for the 14" LCD. Anyone care to share any thoughts?
Thanks,
Justin

P.S. If anyone cares to research the info I gave above, notice that the FPC cables for the 12" LCD's (A) are the same FRU # for the -451 and -452 (had to pay close attention and do a little digging to notice this), and (2) both 12" FPC cables appear to plug directly into the mainboard without an LVDS board.

[kurgan]

Just to update if anyone cares, I purchased a 14.1" LCD complete assy. with the LVDS board from a 2611-452, and it worked just fine on my 2611-451. I guess there are more of these parts that are interchangeable than I thought.