problem after upgrade Rescue & Recovery 4.1

T60/T61 series specific matters only
Post Reply
Message
Author
smdlmt
Posts: 9
Joined: Mon Jul 30, 2007 2:21 am
Location: Tehran, IRAN

problem after upgrade Rescue & Recovery 4.1

#1 Post by smdlmt » Sun Aug 12, 2007 8:06 am

Hi every one,
I installed Rescue and Recovery 4.1, and when boot to it(Rescue and Recovery) an alarm appears say that the file /mimi/?.log(I fotget!) damaged, and suggest to Chkdsk, but when I go to windows and want to check disk an error occurred and don't finish it, what's the problem?
tanx

Bunny Lebowski
Posts: 8
Joined: Sun Aug 12, 2007 9:58 pm
Location: New Orleans, LA

Get some R&R

#2 Post by Bunny Lebowski » Mon Aug 13, 2007 1:39 am

Are you sure the upgrade caused the problem? How long before you upgraded did you successfully boot to R&R?

GomJabbar
Moderator
Moderator
Posts: 9765
Joined: Tue Jun 07, 2005 6:57 am

#3 Post by GomJabbar » Mon Aug 13, 2007 6:29 am

I don't know if this will help, but you could try going to the BIOS setup menu and Disabling the Security for the Predesktop Area, then booting into Windows and running CHKDSK. Once finished, be sure and reset the Security for the Predesktop Area back to Normal.

Actually, I think a better method would be to run CHKDSK from the Recovery Console. If you have a Windows install CD lying around, you can run the Recovery Console by booting up from it.

If you still have problems, you may have to uninstall and reinstall R&R 4.1 after running CHKDSK.
DKB

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 15 guests