Use this Forum for the ThinkPad hardware you have for sale or want to buy.
Sorry, no commercial sellers allowed here without asking Bill
-
Zephir
- Posts: 7
- Joined: Fri Jul 27, 2007 3:27 am
- Location: San Jose, CA
#1
Post
by Zephir » Wed Sep 12, 2007 10:14 pm
mod edit: split from
http://forum.thinkpads.com/viewtopic.php?t=49429
-- Sri
Aw common, you just won a X41t on ebay for $550 shipped and charged us this much
If you can reduce the price down to about $580 I would gladly take it off your hand, as I only have this much budget to shop for a portable laptop for college.
-
wearetheborg
- Senior Member

- Posts: 569
- Joined: Sun Oct 22, 2006 1:12 am
- Location: San Pablo, California
#2
Post
by wearetheborg » Wed Sep 12, 2007 10:40 pm
Zephir wrote:Aw common, you just won a X41t on ebay for $550 shipped and charged us this much
If you can reduce the price down to about $580 I would gladly take it off your hand, as I only have this much budget to shop for a portable laptop for college.
How much he bought it for is irrelevant. What matters is the price and the specs now.
If someone recieved a laptop as a gift, you would not expect him to give it away for free would you ?

HP NC8000 UXGA; Dell Precision M90 WUXGA; R50P UXGA
Please PM me if you've had experience with SquareTrade warranties
-
Zephir
- Posts: 7
- Joined: Fri Jul 27, 2007 3:27 am
- Location: San Jose, CA
#3
Post
by Zephir » Wed Sep 12, 2007 10:51 pm
wearetheborg wrote:Zephir wrote:Aw common, you just won a X41t on ebay for $550 shipped and charged us this much
If you can reduce the price down to about $580 I would gladly take it off your hand, as I only have this much budget to shop for a portable laptop for college.
How much he bought it for is irrelevant. What matters is the price and the specs now.
If someone recieved a laptop as a gift, you would not expect him to give it away for free would you ?

I wasn't really serious, it's just a joke
But my offer is serious though

-
ajkula66
- SuperUserGeorge

- Posts: 15742
- Joined: Sun Feb 25, 2007 11:28 am
- Location: Brodheadsville, Pennsylvania
#4
Post
by ajkula66 » Wed Sep 12, 2007 11:05 pm
I can't speak for the seller, but I'd find it very difficult to consider an offer of $580 towards a machine with the asking price of $750 anything but another joke...and in a bad mood I'm sure I would be using a different term...
But then again, it's me...
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: T61p
PMs requesting personal tech support will be ignored.
-
Zephir
- Posts: 7
- Joined: Fri Jul 27, 2007 3:27 am
- Location: San Jose, CA
#5
Post
by Zephir » Wed Sep 12, 2007 11:18 pm
ajkula66 wrote:I can't speak for the seller, but I'd find it very difficult to consider an offer of $580 towards a machine with the asking price of $750 anything but another joke...and in a bad mood I'm sure I would be using a different term...
But then again, it's me...
Not everybody has tons of money to buy a laptop, especially a college student like me, who have to do work study to pay for tuition

If he accepts my offer, great! If he doesn't, I'll have to look for another one. I'm just asking him to consider my offer, that's it. No reason to fuss about it.
-
ajkula66
- SuperUserGeorge

- Posts: 15742
- Joined: Sun Feb 25, 2007 11:28 am
- Location: Brodheadsville, Pennsylvania
#6
Post
by ajkula66 » Wed Sep 12, 2007 11:46 pm
Zephir wrote:
Not everybody has tons of money to buy a laptop, especially a college student like me, who have to do work study to pay for tuition
I don't think that you've understood my point. There is nothing wrong with being on a budget-most of us are, for a variety of reasons.
However, there are ways of going about it. There are plenty of machines for sale on this forum within what you've stated as your price range. No need for lowballing a nice unit offered by a trusted forum member in extremely good standing. Your whole intro, joking or not, could be very easily seen as "thread-crapping" which is not really a welcomed contribution to this forum...
Please don't take this personally. I'd have the same reaction if it were anyone else. I understand that you're pretty new to the forum and that you may not be familiar with all the buying and selling practices that are common here. Don't take my words as criticism, but as a friendly advice.
All the best.
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: T61p
PMs requesting personal tech support will be ignored.
-
silo
- Sophomore Member
- Posts: 181
- Joined: Sat May 08, 2004 4:12 am
- Location: Mississippi
#7
Post
by silo » Thu Sep 13, 2007 12:00 am
ajkula66 wrote:Zephir wrote:
Not everybody has tons of money to buy a laptop, especially a college student like me, who have to do work study to pay for tuition
I don't think that you've understood my point. There is nothing wrong with being on a budget-most of us are, for a variety of reasons.
However, there are ways of going about it. There are plenty of machines for sale on this forum within what you've stated as your price range. No need for lowballing a nice unit offered by a trusted forum member in extremely good standing. Your whole intro, joking or not, could be very easily seen as "thread-crapping" which is not really a welcomed contribution to this forum...
Please don't take this personally. I'd have the same reaction if it were anyone else. I understand that you're pretty new to the forum and that you may not be familiar with all the buying and selling practices that are common here. Don't take my words as criticism, but as a friendly advice.
All the best.
Not my place to make the call, but by my lights the one guy can ask what he wants for the machine, and the other guy can offer what he wants to offer, and also say whatever he wants, within the bounds of propriety and good taste, natch.
-
Zephir
- Posts: 7
- Joined: Fri Jul 27, 2007 3:27 am
- Location: San Jose, CA
#8
Post
by Zephir » Thu Sep 13, 2007 12:12 am
silo wrote:ajkula66 wrote:Zephir wrote:
I don't think that you've understood my point. There is nothing wrong with being on a budget-most of us are, for a variety of reasons.
However, there are ways of going about it. There are plenty of machines for sale on this forum within what you've stated as your price range. No need for lowballing a nice unit offered by a trusted forum member in extremely good standing. Your whole intro, joking or not, could be very easily seen as "thread-crapping" which is not really a welcomed contribution to this forum...
Please don't take this personally. I'd have the same reaction if it were anyone else. I understand that you're pretty new to the forum and that you may not be familiar with all the buying and selling practices that are common here. Don't take my words as criticism, but as a friendly advice.
All the best.
Not my place to make the call, but by my lights the one guy can ask what he wants for the machine, and the other guy can offer what he wants to offer, and also say whatever he wants, within the bounds of propriety and good taste, natch.
That's my principle, thanks for the support, silo

-
KristianJ
- Moderator1

- Posts: 1074
- Joined: Fri Apr 07, 2006 5:45 am
- Location: Penrith, Australia
#9
Post
by KristianJ » Thu Sep 13, 2007 1:23 am
Generally though, I'd suggest that the offering and negotiation take place privately. And I'd say it's common sense for all who buy and sell that in the interests of fair play, you do that enquiring in a private message. Experience has shown that when a query on a price or an offer lower than the asking price is made, the thread shoots off on a tangent, which I'm sure is not what the seller desires.
As for what PW has done in buying cheap and selling at a higher price, if I managed to snap up what I considered a bargain, and then onsell it for a higher price that I believed reflected its actual value, I'd by all means do that. The market will determine whether or not there's someone who agrees with my belief.
X220 4291-46M
HP Pavilion dv7-2109tx
-
pianowizard
- Senior ThinkPadder

- Posts: 8368
- Joined: Tue Jun 28, 2005 5:07 am
- Location: Ann Arbor, MI
-
Contact:
#10
Post
by pianowizard » Thu Sep 13, 2007 8:13 am
Zephir wrote:Aw common, you just won a X41t on ebay for $550 shipped and charged us this much
That X41t didn't come with a digitizer pen or the recovery partition or the recovery discs. I had to spend another $50 to get both.
MODERATORS: Would you please delete this moron's posts?
Microsoft Surface 3 (Atom x7-Z8700 / 4GB / 128GB / LTE)
Dell OptiPlex 9010 SFF (Core i3-3220 / 8GB / 8TB); HP 8300 Elite minitower (Core i7-3770 / 16GB / 9.25TB)
Acer T272HUL; Crossover 404K; Dell 3008WFP, U2715H, U2711, P2416D; Monoprice 10734; QNIX QHD2410R; Seiki Pro SM40UNP
-
pianowizard
- Senior ThinkPadder

- Posts: 8368
- Joined: Tue Jun 28, 2005 5:07 am
- Location: Ann Arbor, MI
-
Contact:
#11
Post
by pianowizard » Thu Sep 13, 2007 8:16 am
silo wrote:Not my place to make the call, but by my lights the one guy can ask what he wants for the machine, and the other guy can offer what he wants to offer, and also say whatever he wants, within the bounds of propriety and good taste, natch.
The problem is I actually paid $601 on this machine, not $550 as that idiot claimed.
MODERATORS: Would you please delete Zephir's posts? No one has upset me as much on this forum. If possible, please delete all posts in this thread except my opening post. Thanks.
Microsoft Surface 3 (Atom x7-Z8700 / 4GB / 128GB / LTE)
Dell OptiPlex 9010 SFF (Core i3-3220 / 8GB / 8TB); HP 8300 Elite minitower (Core i7-3770 / 16GB / 9.25TB)
Acer T272HUL; Crossover 404K; Dell 3008WFP, U2715H, U2711, P2416D; Monoprice 10734; QNIX QHD2410R; Seiki Pro SM40UNP
-
qviri
- ThinkPadder

- Posts: 1275
- Joined: Sat Nov 25, 2006 5:45 pm
- Location: Berlin, Germany
#12
Post
by qviri » Thu Sep 13, 2007 8:26 am
pianowizard wrote: as that idiot claimed.
Attack the actions, not the person

X220/IPS, T60p/IPS
Nothing endures but change
-
wearetheborg
- Senior Member

- Posts: 569
- Joined: Sun Oct 22, 2006 1:12 am
- Location: San Pablo, California
#13
Post
by wearetheborg » Thu Sep 13, 2007 8:28 am
Calm down Piano

HP NC8000 UXGA; Dell Precision M90 WUXGA; R50P UXGA
Please PM me if you've had experience with SquareTrade warranties
-
pianowizard
- Senior ThinkPadder

- Posts: 8368
- Joined: Tue Jun 28, 2005 5:07 am
- Location: Ann Arbor, MI
-
Contact:
#14
Post
by pianowizard » Thu Sep 13, 2007 8:28 am
qviri wrote:pianowizard wrote: as that idiot claimed.
Attack the actions, not the person

Such actions can only be done by an idiot.
Microsoft Surface 3 (Atom x7-Z8700 / 4GB / 128GB / LTE)
Dell OptiPlex 9010 SFF (Core i3-3220 / 8GB / 8TB); HP 8300 Elite minitower (Core i7-3770 / 16GB / 9.25TB)
Acer T272HUL; Crossover 404K; Dell 3008WFP, U2715H, U2711, P2416D; Monoprice 10734; QNIX QHD2410R; Seiki Pro SM40UNP
-
wearetheborg
- Senior Member

- Posts: 569
- Joined: Sun Oct 22, 2006 1:12 am
- Location: San Pablo, California
#15
Post
by wearetheborg » Thu Sep 13, 2007 8:29 am
pianowizard wrote:
Such actions can only be done by an idiot.
Regardless, I'm sure name calling is against forum rules.

HP NC8000 UXGA; Dell Precision M90 WUXGA; R50P UXGA
Please PM me if you've had experience with SquareTrade warranties
-
pianowizard
- Senior ThinkPadder

- Posts: 8368
- Joined: Tue Jun 28, 2005 5:07 am
- Location: Ann Arbor, MI
-
Contact:
#16
Post
by pianowizard » Thu Sep 13, 2007 8:34 am
I need to sell this laptop before moving to NYC on Sep 29th. This guy's thread crapping might be preventing it from happening. I am paying a lot for rent (a nice bedroom in Manhattan for one month, go figure!) and need this money desperately. How can I not be upset?
Microsoft Surface 3 (Atom x7-Z8700 / 4GB / 128GB / LTE)
Dell OptiPlex 9010 SFF (Core i3-3220 / 8GB / 8TB); HP 8300 Elite minitower (Core i7-3770 / 16GB / 9.25TB)
Acer T272HUL; Crossover 404K; Dell 3008WFP, U2715H, U2711, P2416D; Monoprice 10734; QNIX QHD2410R; Seiki Pro SM40UNP
-
wearetheborg
- Senior Member

- Posts: 569
- Joined: Sun Oct 22, 2006 1:12 am
- Location: San Pablo, California
#17
Post
by wearetheborg » Thu Sep 13, 2007 8:39 am
pianowizard wrote:I need to sell this laptop before moving to NYC on Sep 29th. This guy's thread crapping might be preventing it from happening. I am paying a lot for rent and need this money desperately. How can I not be upset?
Technically he has not thread crapped. He has not said the laptop is not worth 750. He has just made a lower offer.
HP NC8000 UXGA; Dell Precision M90 WUXGA; R50P UXGA
Please PM me if you've had experience with SquareTrade warranties
-
JaneL
- Admin

- Posts: 4995
- Joined: Thu Apr 15, 2004 4:40 am
- Location: Greenville SC
#18
Post
by JaneL » Thu Sep 13, 2007 10:43 am
I'm not very happy with the tone of this thread's discussion. Name-calling and arguing is not acceptable under any circumstance. Take that sort of behavior off-line immediately.
Having said that, messages in the Marketplace are no different than any other messages posted on thinkpads.com. If you post something, expect to get differing opinions, and be prepared to handle responses in a calm and civil manner. Negotiations and offers should be made privately and not in the public view.
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X300, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga 3 Pro
Bill Morrow's thinkpads.com Facebook group
I'm on Twitter
I do
NOT respond to PM or e-mail requests for personal tech support.
-
-
- 4 Replies
- 1028 Views
-
Last post by axur-delmeria
Tue Apr 04, 2017 11:08 pm
-
-
- 0 Replies
- 173 Views
-
Last post by TonyJZX
Tue May 16, 2017 4:02 am
-
-
- 10 Replies
- 687 Views
-
Last post by olex126
Tue Jan 10, 2017 5:12 am
Who is online
Users browsing this forum: hengster and 6 guests