Optical drive issues?

T60/T61 series specific matters only
Post Reply
Message
Author
DavidNY
Sophomore Member
Posts: 160
Joined: Fri Jan 28, 2005 5:21 pm

Optical drive issues?

#1 Post by DavidNY » Thu Sep 13, 2007 9:39 pm

I'm curious if anyone has had a bad optical drive.

I have a Hitachi (HL-DT-ST DVDRAM GSA-4083N) in one of my T60's utrabays. It is burning a lot of DVD-Video coasters lately, getting lots of bad data towards the end of the program I'm burning.

My two other drives, a Matshita DVD-RAM UJ-842 in my other T60's utrabay, and an external Pioneer, both work fine.

The T60 with the bad drive has heat issues, which could be the underlying cause.
X61t, T60, T23, T21 (all XP), 385XD

ryengineer
Moderator Emeritus
Moderator Emeritus
Posts: 4393
Joined: Wed Sep 20, 2006 9:29 pm
Location: L.A. (home town) CA, Toronto ON.

#2 Post by ryengineer » Thu Sep 13, 2007 10:36 pm

I am assuming here software is not an issue.

Run PC Doctor.

Please look into this this page as well. It has alot of troubleshooting suggestions.

You can also try swapping the ultrabays. I don't see heat being the consequence of this. For heat concern, make sure you have the latest version of BIOS (a latest version has been released today) installed.

Lastly if nothing helps and if your machine is still under warranty then please call IBM at 1-800-426-7378 (24/7)! for replacement.
"I've come a long, long way," she said, "and I will go as far,
With the man who takes me from my horse, and leads me to a bar."
The man who took her off her steed, and stood her to a beer,
Were a bleary-eyed Surveyor and a DRUNKEN ENGINEER.

krajicek
Posts: 43
Joined: Sat Mar 05, 2005 5:40 pm
Location: Dublin, Ireland

#3 Post by krajicek » Sat Sep 15, 2007 11:14 am

Hi,

having a similar issue with the same optical drive (GSA-4083N) on T60 2007-FSG. burned successfuly dvd+r from one package but having problems to burn dvd+r from the other. both verbatim dvd+r 16x. successful one was Verbatim DataLifePlus Advanced AZO PastelDisc and unlucky attempt made on Verbatim Advanced AZO+ from cake of 25 (YUDEN000T03).

i have a suspicion that it will be either the firmware or Sonic weirdo as my girlfriend's T60 2007-FVG behaves the same way.

firmware version on older one (2007-FSG) is 1.08 on newer (2007-FVG) is 1.00

wondering about the experience the others have

tia
krajicek

GomJabbar
Moderator
Moderator
Posts: 9765
Joined: Tue Jun 07, 2005 6:57 am

#4 Post by GomJabbar » Sat Sep 15, 2007 11:41 am

I have had major problems with Verbatim CD's made in India. Verbatim's from Taiwan are fine. Oddly, the CD's made in India used a different dye than the ones made in Taiwan. I believe the disks made in Japan should be fine as well. IIRC, the CD's made in Taiwan were labeled: DataLifePlus.

I know I was referring to CD's and not DVD's above, but still, I would avoid disks made in India. I still buy (non-Indian) Verbatim disks, both CD/R's and DVD+-R's. They work great for me.

The following thread might help. You can also use a CD cleaning disk to clean the laser occasionally.
http://forum.thinkpads.com/viewtopic.php?t=44425
DKB

krajicek
Posts: 43
Joined: Sat Mar 05, 2005 5:40 pm
Location: Dublin, Ireland

#5 Post by krajicek » Sat Sep 15, 2007 12:13 pm

just have given it another try - one more verbatim dvd+r from cake of 25. this time it was burned fine - without any glitch.
only thing i've changed was that i switched DVD recording speed from MAX to 8x (Tools -> Options -> General -> Advanced in Sonic)
success achieved on 2007-FVG with firmware version 1.00

so have to check the other machine as well to see if the speed was the issue or maybe just few wrong pieces from the cake

btw. Verbatims I use are Made In Japan

krajicek

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 33 guests