600x TV out

Message

glenn778 · #1 Post by **glenn778** » Mon Sep 24, 2007 1:15 am

I bought a TV out card for my 600x and obtained a cable. I hooked everything up but no signal out. Can someone tell me what I am doing wrong? Is there a special key combo I need to push? I know it is not FN F7, that is for an external monitor. Any help would be appreciated.

lmk,
glenn778

The Spirit of X21 · #2 Post by **The Spirit of X21** » Mon Sep 24, 2007 2:27 am

What is the name of the card? Do you have the drivers for it?

bobgarty · #3 Post by **bobgarty** » Mon Sep 24, 2007 3:27 am

glenn778 wrote:I bought a TV out card for my 600x and obtained a cable.

Is this the thinkpad internal TV out card?

ms5133 · #4 Post by **ms5133** » Mon Sep 24, 2007 7:18 am

I think you need to activate this feature in the IBM config. utility.

Incidentaly, is the card you installed FRU 10L1352?

whizkid · #5 Post by **whizkid** » Mon Sep 24, 2007 8:53 am

What OS are you using, Glen?

In W2K, you have to use Microsoft's driver, not IBM's.

The settings are in the display properties.

#6 Post by **rkawakami** » Mon Sep 24, 2007 1:09 pm

You also must have the laptop connected to the TV and the TV on, before powering up the 600X.

http://forum.thinkpads.com/viewtopic.php?t=8643

glenn778 · #7 Post by **glenn778** » Mon Sep 24, 2007 10:56 pm

I have an IBM internal tv out module and cable I installed on my 600x. Thanks for the reply, I will try these suggessions. I am usking W2K for an OS.
Glenn

600x TV out

600x TV out

Re: 600x TV out

TV out

Who is online