T4x T6x LCD Swap: Cable Assembly & Inverter Similarity?

Message

xyz · #31 Post by **xyz** » Thu Dec 06, 2007 6:54 pm

They don't have a how to guide for this or anything do they....
I take the spd will be stored on a chip on the panel ...
So one can just desloder and re program it but the problem is in getting the info to reprogram it with..

So we would just need to spd info off a 15" uxga panel and reprogram to the 14" panel

I think ..

At 60 with a uxga would just be soo awesome...

Gonna have a browse around and see if any materials out there on this in english

xyz · #32 Post by **xyz** » Thu Dec 06, 2007 7:55 pm

They have an englsih section on the chinese forum well worth a read

http://forum.51nb.com/fid80

amuraivel · #33 Post by **amuraivel** » Tue Dec 11, 2007 12:33 pm

I am selling the panel: http://search.ebay.com/_W0QQsassZamuraivel

I give up on the project with my model. Hopefully someone with a 14" t42 can upgrade.

If you are a member of this forum with 10+ posts. I will throw in the 15" cable for only 10USD extra.

Thanks for the help though everyone.

kkposh · #34 Post by **kkposh** » Tue Dec 11, 2007 1:46 pm

This looks somewhat similiar to one topic we've discussed before.
see this http://forum.thinkpads.com/viewtopic.php?t=49078

As xyz said,that chinese forum has now set up a board discussing in English which may includes some useful information for you.
http://forum.51nb.com/forum-80-1.html

I find a thread rather informative.
http://forum.51nb.com/thread-576191-1-2.html

xyz · #35 Post by **xyz** » Tue Dec 11, 2007 2:03 pm

yes thats about it, exceelent find,

They have attached the spd file needed and you just need an idea of the programmer used then it should be plain sailing joy

Hey amuraivel you shud give it a try if you are up to it.
No point in calling it day when you are so close.

kkposh · #36 Post by **kkposh** » Tue Dec 11, 2007 2:06 pm

I did more search and here's the result.
http://enforum.51nb.com/viewthread.php?tid=569763
(Sorry there's only chinese version yet.)
Installing UXGA on T60 is absolutely doable.

Wish you good luck

kkposh · #37 Post by **kkposh** » Tue Dec 11, 2007 2:15 pm

xyz wrote:yes thats about it, exceelent find,

They have attached the spd file needed and you just need an idea of the programmer used then it should be plain sailing joy

Hey amuraivel you shud give it a try if you are up to it.
No point in calling it day when you are so close.

The SPD file attached is for QXGA.UXGA one wasn't provided.
I guess that one can read the SPD information of 15' UXGA out and write it into a 14' UXGA to make it work.

amuraivel · #38 Post by **amuraivel** » Tue Dec 11, 2007 4:47 pm

Thanks to our chinese friends, we have a hint that this is doable, but I am not sure:
a. What this entails on a practical level.
b. Even if it did have 15" UXGA firmware whether it would be compatible.

xyz · #39 Post by **xyz** » Tue Dec 11, 2007 7:00 pm

1. we need to program the uxga panel with the spd info.

Seems it doesn;t work due to it not havin the required paramters in the spd.

Some kind of programmer is needed.. the points are given in the post before on the chinese site.

I believe once we have the correct parameters it will work.

Now just need to source a reasonably priced t60p lol... to try this out,

xyz · #40 Post by **xyz** » Tue Dec 11, 2007 7:21 pm

the programmer needed to read the code and write the code is a 'EPROM reader 24C02'

Here is a link to a programmer that would do the job

http://www.lancos.com/prog.html

xyz · #41 Post by **xyz** » Wed Dec 12, 2007 8:48 pm

If any one can translate the following posts it would be most beneficial.

http://enforum.51nb.com/viewthread.php? ... t60%2Buxga

http://enforum.51nb.com/viewthread.php? ... t60%2Buxga

T4x T6x LCD Swap: Cable Assembly & Inverter Similarity?

LCD Panel sale UXGA 14"

Who is online