Flexview questions

Performance, hardware, software, general buying and gaming discussion..
Post Reply
Message
Author
ymemuser
Freshman Member
Posts: 75
Joined: Wed Jun 13, 2007 2:14 am
Location: Port Huron, MI

Flexview questions

#1 Post by ymemuser » Sun Oct 14, 2007 5:07 pm

What is brightness/angles/contrast/gloss-matte and resolution for 15'' flexview screen? Thanks

dr_st
Senior ThinkPadder
Senior ThinkPadder
Posts: 6657
Joined: Sat Oct 29, 2005 6:20 am

#2 Post by dr_st » Sun Oct 14, 2007 6:59 pm

15" Flexview screens come in SXGA+ (1400x1050) and UXGA (1600x1200) versions. While the former are hard to get, the latter are very very hard to get at this point. Formerly, all 15" T42p/T43p/T60p models came with UXGA Flexview, but because of supply problems, the last T60p models had SXGA+. Flexview is no longer available at all on T61p.

Most of the Flexview screens are rated 200cd/m^2 (200nit) for brightness and 400:1 to 500:1 for contrast. Measured values are typically slightly lower. They are all matte screens, and have 180 viewing angles.

Troels
ThinkPadder
ThinkPadder
Posts: 1017
Joined: Wed Oct 12, 2005 2:55 pm
Location: Aalborg, Denmark

#3 Post by Troels » Mon Oct 15, 2007 6:06 pm

Actually, the only measurement i have seen showed a contrast of 502:1 - http://www.notebookcheck.com/Test-Lenov ... 830.0.html

Who the manufacturer is - i have no clue, since it is a "custom rebuild" made by some company.

I've never seen one measured with a 200 nit brightness, probably designed by IBM to gain more respectable black levels.
Viewing angles is between 175 and 180 degrees.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad - General HARDWARE/SOFTWARE questions”

Who is online

Users browsing this forum: No registered users and 12 guests