Questions about T61 (resolution and others)

T60/T61 series specific matters only
Post Reply
Message
Author
kangazoom
Freshman Member
Posts: 57
Joined: Sat May 29, 2004 1:44 am
Location: Cambridge, MA

Questions about T61 (resolution and others)

#1 Post by kangazoom » Tue Oct 23, 2007 5:37 pm

Hi, everyone.

Unfortunately, my T42 is on its last legs. This means that I will be purchasing a T61 within the next few days (I get a nice discount from my university).

However, I have a few questions:

- I currently use a 15" SXGA+ (1400x1050) TFT LCD. I am very happy with this resolution. I know that the 14.1" and 15.4" widescreens have different resolutions, but (in your opinion), which resolution appears most similar to the one I currently use--which should be the easiest for me to adapt to?
- Do you find that the 15.4" is much less portable than the 14.1"? I would like something fairly portable (I have a small frame), but the laptop's LCD will be my primary screen (so it can't be too small). Unfortunately, I have only personally seen the 15.4" screen, so I am not sure if the 14.1" would be too small to use as a primary screen.
- Does the quality of the screen differ from the 14.1" and the 15.4" or are they basically the same?
- The consensus seems that Windows Vista is still a bit too buggy -- should I just opt for Windows XP?
- As I multitask a lot, what will be the most important factor when I customize the configuration? Memory, CPU speed, HD speed, etc?

Thank you so much, sorry for all the questions!

rxblitzrx
Freshman Member
Posts: 95
Joined: Fri Oct 19, 2007 8:10 am
Location: Houston, TX

#2 Post by rxblitzrx » Tue Oct 23, 2007 7:11 pm

I recently made the same switch you did. I went from:

Thinkpad R40
15" SXGA+ 1400 x 1050

to

Thinkpad T61
14.1" WXGA+ 1440 x 900

This is my first experience with widescreen and I have to say it was a VERY smooth transition. I personally think 15.4 is too big. Clarity wise, the 1440 x 900 looks about the same as the 1400 x 1050. Size wise, everything looks about the same size on my desktop.

One complaint I have about the T61 LCDs is that the matte finish combined with the TN panels it comes with, don't afford very good vertical viewing angles. They're really bright but you have to look directly 90 degrees at it. Anything +- 7 degrees and you'll start to see wash out in the text. To fix this, I sent my laptop to ScreenTek and did a "glossy" mod. Now it looks like a Dell TruLife or Sony XBRITE LCD. Results?

AMAZING. Vertical viewing angles have dramatically improved and contrast ratios are much better. I seriously can not stop looking at the screen. My eyes never get tired and I'm constantly mesmerized by the screen. You'll get the reflection problems of any glossy screen, but to me, it's easily worth the trade for practical viewing angles and higher contrast.

My recommendation: 14.1" WXGA+ 1440 x 900 and call ScreenTek. (you can google the name to find the website)

Good luck!
T400 P8400 ::: 14.1" WXGA+ (LG Panel) ::: NMB Keyboard ::: XP Pro Enhanced (build date 9-02-2008)

Hellbore
Sophomore Member
Posts: 137
Joined: Mon Oct 15, 2007 12:19 am
Location: Mesa, AZ

#3 Post by Hellbore » Tue Oct 23, 2007 7:47 pm

Does this void your warranty?

ryengineer
Moderator Emeritus
Moderator Emeritus
Posts: 4393
Joined: Wed Sep 20, 2006 9:29 pm
Location: L.A. (home town) CA, Toronto ON.

#4 Post by ryengineer » Tue Oct 23, 2007 9:34 pm

Hellbore wrote:Does this void your warranty?
Most likely, yes.
"I've come a long, long way," she said, "and I will go as far,
With the man who takes me from my horse, and leads me to a bar."
The man who took her off her steed, and stood her to a beer,
Were a bleary-eyed Surveyor and a DRUNKEN ENGINEER.

dr_st
Senior ThinkPadder
Senior ThinkPadder
Posts: 6657
Joined: Sat Oct 29, 2005 6:20 am

Re: Questions about T61 (resolution and others)

#5 Post by dr_st » Tue Oct 23, 2007 10:00 pm

kangazoom wrote:- I currently use a 15" SXGA+ (1400x1050) TFT LCD. I am very happy with this resolution. I know that the 14.1" and 15.4" widescreens have different resolutions, but (in your opinion), which resolution appears most similar to the one I currently use--which should be the easiest for me to adapt to?
In terms of dot pitch and overall screen real estate, the 14" WXGA+ is the closest to 15" SXGA+. In practice, you can probably adapt to 14" SXGA+ and 15.4" WSXGA+ without too much trouble, as far as resolution goes. Unfortunately, in terms of quality all the screens are so much worse than you current Flexview IPS screen. rxblitzrx's suggestion of making a glossy mod is something to consider, if it really helps with the viewability.
kangazoom wrote:- Do you find that the 15.4" is much less portable than the 14.1"? I would like something fairly portable (I have a small frame), but the laptop's LCD will be my primary screen (so it can't be too small). Unfortunately, I have only personally seen the 15.4" screen, so I am not sure if the 14.1" would be too small to use as a primary screen.
IMO, it's not too small, and it is significantly more portable.
kangazoom wrote:- Does the quality of the screen differ from the 14.1" and the 15.4" or are they basically the same?
I've seen a couple of WXGA+ T61s and the screen is really really bad. Worse than the SXGA+ T60, which in itself is far from good. Dunno about the 15.4".

eyecon82
Sophomore Member
Posts: 130
Joined: Fri Aug 10, 2007 5:56 pm

#6 Post by eyecon82 » Wed Oct 24, 2007 6:14 pm

i had a 15in WS and thought it was way too big; i was able to exchnage it for a 14in ws and i am more satisfied

i also had wxga+ on the 15in and thought it was way too small for my purposes..so i went with wxga on the 14 and i am very happy..i just use the ctrl+winodws+ scrolling up or down to rechange icon size to a smaller size

kangazoom
Freshman Member
Posts: 57
Joined: Sat May 29, 2004 1:44 am
Location: Cambridge, MA

#7 Post by kangazoom » Thu Oct 25, 2007 6:35 pm

Thanks, I think I will go with the 14.1"

Now, whether to get Vista or XP...

rxblitzrx
Freshman Member
Posts: 95
Joined: Fri Oct 19, 2007 8:10 am
Location: Houston, TX

#8 Post by rxblitzrx » Thu Oct 25, 2007 8:03 pm

kangazoom wrote:Thanks, I think I will go with the 14.1"

Now, whether to get Vista or XP...
XP... no question

Do you really want your OS asking you for permission every time you click your mouse to execute a command?
T400 P8400 ::: 14.1" WXGA+ (LG Panel) ::: NMB Keyboard ::: XP Pro Enhanced (build date 9-02-2008)

ryengineer
Moderator Emeritus
Moderator Emeritus
Posts: 4393
Joined: Wed Sep 20, 2006 9:29 pm
Location: L.A. (home town) CA, Toronto ON.

#9 Post by ryengineer » Thu Oct 25, 2007 9:17 pm

rxblitzrx wrote:snip.......Do you really want your OS asking you for permission every time you click your mouse to execute a command?
You can disable it though.

Choice of Operating System is a personal preference, although I were to suggest, I would've suggested Windows XP too.
"I've come a long, long way," she said, "and I will go as far,
With the man who takes me from my horse, and leads me to a bar."
The man who took her off her steed, and stood her to a beer,
Were a bleary-eyed Surveyor and a DRUNKEN ENGINEER.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 15 guests