Anybody have an old keyboard lying around?

Use this Forum for the ThinkPad hardware you have for sale or want to buy.
Sorry, no commercial sellers allowed here without asking Bill
Post Reply
Message
Author
hobbes
Freshman Member
Posts: 53
Joined: Mon Jan 31, 2005 10:18 am
Location: New Jersey

Anybody have an old keyboard lying around?

#1 Post by hobbes » Wed Jan 02, 2008 10:45 am

My niece dropped a book on the keyboard of my T42 and popped off one of the keys (the "C"). I found a nice thread here with great instructions on how to reinstall the key, but it appears that one of the plastic pieces underneath disappeared when the key went flying, so I don't have everything I need to do the replacement.

I was hoping somebody would have an old keyboard lying around they would be willing to donate. It doesn't have to be a working keyboard or in good shape, since I just want to get some of the support pieces for the key. My keyboard was replaced under warranty less than a year ago and I lucked out and got a good NMB one, so I'd rather not replace the entire keyboard if I can just fix this one key.

If anybody can provide the "guts" of a couple of keys or the entire keyboard I would be eternally grateful.

Johan
Moderator1
Moderator1
Posts: 1977
Joined: Mon Mar 07, 2005 2:00 pm
Location: Copenhagen, Denmark

#2 Post by Johan » Wed Jan 02, 2008 1:31 pm

- recently, when replacing a keyboard on a T42, I managed to "break off" one of the Alt-keys :oops: (don't tell anybody!), and it was even such a nice and new Thai NMB-keyboard. Although I had all the parts (and none were damaged), I felt unsure of how to repairing it (= mounting the key again), but I recalled that I had seen an ad at eBay where a chap mentioned that he sell keys and also deliver detailed mounting instructions. OK, first (with no instructions) I tried for myself to mount the key again - but it is soo small and fragile, so I didn't dare continue without the proper instructions. So, I mailed the eBay seller --> here and kindly asked if he would sell the instructions only... and less than an hour later, this very helpful person mailed (free of charge!) the instructions - and said that if usable, I was welcome to pay (what I of course did immediately, in any case, and with an added "friendship-bonus"). After reading the instructions, I managed to fix my keyboard... and I was happy and proud of myself! :-)

All this to say: I suggest you contact this very kind fellow and specify what kind of keyboard you have, and what key you need (he may be reached via mail: laptopkeys [at] yahoo [dot] ca). The price if absolutely fair; only $7.5 incl. S/H. And, hey, remember this: If you repair your keyboard by yourself, it will be much more personal afterwards! :-)

Best regards,

Johan
IBM T42p's (2373-Q1U & -Q2U): 2.1 GHz, 15" UXGA FlexView, 2 GB RAM, 128 MB FireGL T2, 128 GB 1.8" SATA SSD, IBM a/b/g, BT, Win 7 Ultimate
IBM T42 (2373-N1G): 1.8 GHz, 15" SXGA+ FlexView, 2 GB RAM, 64 MB Radeon 9600, 64 GB 1.8" SATA SSD, IBM a/b/g, BT, Win 7 Ultimate

Sace
Posts: 7
Joined: Thu Dec 27, 2007 6:10 pm
Location: Silkeborg Denmark

#3 Post by Sace » Wed Jan 02, 2008 1:44 pm

Hi - First post on this great forum!

I once managed to break my left "shift" key of my T40 keyboard (also the thai one, so didn't abandon it).

I contacted the store where i bought my machine, and they sent me a new set of key plastics for the right shift, FREE of charge! So, you should be able to get one cheap!

Mounting the key is not that dificult! Especially not if you get a complet e new, as these are assembled and basically mounted with one sigle clik.

lazyazn
Freshman Member
Posts: 68
Joined: Fri Dec 07, 2007 11:49 pm
Location: centreville, VA

#4 Post by lazyazn » Wed Jan 02, 2008 2:30 pm

i have a t60 keyboard that i can sell it to you for $8 shipped. everything is fine with keyboard except that i somehow managed to break the connection jack. however, i dont think you need to would need to use the connection. let me know

hobbes
Freshman Member
Posts: 53
Joined: Mon Jan 31, 2005 10:18 am
Location: New Jersey

#5 Post by hobbes » Wed Jan 02, 2008 10:43 pm

Thanks for the offer lazyazn. I'd prefer to find a T4x keyboard or keys if I can, since I'm not sure of the total compatibility of the mechanism for the T6x keyboards. But if I can't find another option I might take you up on your offer. Is yours an NMB or a Chicony keyboard?


I'm still hoping somebody out there has an old keyboard for the T4X series.

I wonder if it has to be an NMB keyboard for the key mechanism to be the same, even within the T4x series.

dsigma6
Senior ThinkPadder
Senior ThinkPadder
Posts: 2299
Joined: Wed Apr 26, 2006 2:13 pm
Location: Philadelphia, PA
Contact:

#6 Post by dsigma6 » Thu Jan 03, 2008 8:48 am

Hopefully you don't end up searching on eBay...sleaze bags sell 1 key for like $6.
[Current] [Dell Latitude D630] : [Past] [T43] [T40] [T23] [T20] [R40] [X22] [600E] [570] [765D]

lazyazn
Freshman Member
Posts: 68
Joined: Fri Dec 07, 2007 11:49 pm
Location: centreville, VA

#7 Post by lazyazn » Thu Jan 03, 2008 5:31 pm

Is yours an NMB or a Chicony keyboard?
i have no idea. how do i check?

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Marketplace - Forum Members only”

Who is online

Users browsing this forum: hwattys and 25 guests