Did I got a broken ultrabay battery? - Solved
Did I got a broken ultrabay battery? - Solved
I just bought a new ultrabay slim battery to T42, but it seems to be something wrong, when Battery Management shows an error on the second battery (ultrabay battery). It wont recognice it and is not charging it.
Could I try some tricks, or just return the battery to the shop?
Edit. Yes the battery is an original IBM product (not a pirate or something else)
Edit2. This is my first ultrabay battery, so I cannot say, if the ultrabay slot works properly. There are no problems with dvd- burner or hdd-adapter, but the battery uses different pins than first ones.
Could I try some tricks, or just return the battery to the shop?
Edit. Yes the battery is an original IBM product (not a pirate or something else)
Edit2. This is my first ultrabay battery, so I cannot say, if the ultrabay slot works properly. There are no problems with dvd- burner or hdd-adapter, but the battery uses different pins than first ones.
Last edited by Patrik28 on Tue Jan 22, 2008 1:35 pm, edited 3 times in total.
Just a simple "error", reading in the black slot, where the battery charge should be seen. And then a red cross on the battery symbol on the left side of black slot.fparisi wrote:What's the error message?
Edit. Here is the picture (hope that the language won't bother you):
--- Warning 36Kb picture start
http://i85.photobucket.com/albums/k75/P ... attery.jpg
--- Picture end.
So "Virhe" means Error.
Note from Moderator: The pic warning needs to be in the subject line for the thread.
My hunch is that since the battery MGT software is recognizing it, that you have a faulty battery.
Have them try it in another machine or give you a new battery to try.
Have them try it in another machine or give you a new battery to try.
PadHead T60 FlexView LCD, 3GB RAM, 7200RPM 160GB Hitachi, DVD-RW, Verizon WWAN, BT, ATI x1400, Fingerprint reader, Atheros wifi card, 9-cell, Hard drive caddy clone, XP Pro (of course).
T30, T43 flexview, T43P flexview. retired
T30, T43 flexview, T43P flexview. retired
i'd say it's cuz the battery self discharged and needs to be in there for a while before it starts taking a charge again. 24hrs. You can also take out the main battery, put the UB in and turn off the system and just let it try to charge it a bit. You should see the amber light to indicate it's charging or at least trying to charge it.
Current - Thinkpad T410si - Core i3 330m, 4GB, 250GB 5400RPM, WXGA+, FPR, BT, Camera, DVDRW, Gobi2000, Win7 Pro x32
Past - Thinkpad T410 - T400 - T61 - T60 - T43 - T42 - T41 - T40 - T23 - 600X
Past - Thinkpad T410 - T400 - T61 - T60 - T43 - T42 - T41 - T40 - T23 - 600X
Shotta makes some good points (charging it for a while) that I had assumed that you had done already.
I would definately try his tips, although the battery should charge while the PC is powered on.
Had you put it in the Ultrabay to charge for a while?
I would definately try his tips, although the battery should charge while the PC is powered on.
Had you put it in the Ultrabay to charge for a while?
PadHead T60 FlexView LCD, 3GB RAM, 7200RPM 160GB Hitachi, DVD-RW, Verizon WWAN, BT, ATI x1400, Fingerprint reader, Atheros wifi card, 9-cell, Hard drive caddy clone, XP Pro (of course).
T30, T43 flexview, T43P flexview. retired
T30, T43 flexview, T43P flexview. retired
Ok, now it works. The battery has been in the ultrabay slot about 10 h, and finally starts to charge.
But isn't that harmfull to keep new batteries so low charged? I have heard that Li-Ion cells will dead and therefore optimal charge is ~40%.
Edit. Fujitsu-Siemens spare-battery was charged up to 50%, when I bought it. But it was only a month old (from manufacture date).
But isn't that harmfull to keep new batteries so low charged? I have heard that Li-Ion cells will dead and therefore optimal charge is ~40%.
Edit. Fujitsu-Siemens spare-battery was charged up to 50%, when I bought it. But it was only a month old (from manufacture date).
well if they were sitting on the shelf for so long then that's why it self discharge dso low.They come from Lenovo at 40% but after month and months (August 2006 that says) they will run down till they are completely dead, at that time you gotta charge it for 12-24hrs continuously before it starts taking a charge as you found out.
Current - Thinkpad T410si - Core i3 330m, 4GB, 250GB 5400RPM, WXGA+, FPR, BT, Camera, DVDRW, Gobi2000, Win7 Pro x32
Past - Thinkpad T410 - T400 - T61 - T60 - T43 - T42 - T41 - T40 - T23 - 600X
Past - Thinkpad T410 - T400 - T61 - T60 - T43 - T42 - T41 - T40 - T23 - 600X
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Got myself a ThinkPad 600E with broken hinges, can I repair old hinges instead of buying new ones?
by karl80038 » Wed Jun 21, 2017 7:40 am » in ThinkPad Legacy Hardware - 3 Replies
- 147 Views
-
Last post by karl80038
Wed Jun 21, 2017 10:04 am
-
-
-
Ultrabay battery prevents main battery from charging?
by ThorOfAsgard » Mon May 22, 2017 11:25 am » in ThinkPad T430/T530 and later Series - 8 Replies
- 265 Views
-
Last post by Thinkpad4by3
Mon May 22, 2017 8:50 pm
-
-
-
did any T520 models have quad-core i7 with Intel (NOT nVIDIA) graphics?
by jthorn42 » Thu Mar 02, 2017 9:46 pm » in ThinkPad T400/410/420 and T500/510/520 Series - 8 Replies
- 1153 Views
-
Last post by jthorn42
Sat Mar 04, 2017 12:02 pm
-
-
-
At which series level did this t series start coming with W7 Restore Discs?
by fefrie » Fri Apr 21, 2017 10:35 pm » in ThinkPad T400/410/420 and T500/510/520 Series - 2 Replies
- 696 Views
-
Last post by w0qj
Sat Apr 22, 2017 5:18 am
-
Who is online
Users browsing this forum: No registered users and 23 guests





