Lenovo warranty service broke something

T60/T61 series specific matters only
Post Reply
Message
Author
gradas
Posts: 21
Joined: Sat Sep 16, 2006 6:18 pm
Location: Omaha NE

Lenovo warranty service broke something

#1 Post by gradas » Thu Jan 24, 2008 8:26 am

I just got my t61p from service (replaced LCD, plastic part???) and right as I opened it I found a small metal piece stuck near spacebar. It looks like clip piece or something. Then I noticed that if I push on plastic just below left Alt it travels about 2mm making creaky sound.

Does your thinkpad do this?

I made a video: http://youtube.com/watch?v=3zmdgSfq23M

Brad
**SENIOR** Member
**SENIOR** Member
Posts: 1847
Joined: Tue Mar 29, 2005 12:41 am
Location: Long Island New York

#2 Post by Brad » Thu Jan 24, 2008 9:04 am

There should not be that much travel in that particular area. Are all the screws on the bottom?

A call should be made to Lenovo and I am sure they will correct the problem.

I can't identify the small part.

Brad
Long Island New York
T43p 2669-Q1U, A22p's UTU A21p HXU
Transnote, 770's 8AU, 600, 701CS, 755CD

meekus
Freshman Member
Posts: 61
Joined: Tue Dec 18, 2007 12:03 am

#3 Post by meekus » Thu Jan 24, 2008 1:40 pm

There are typically two flat spring clips that act as grounds for the keyboard and palm rest located at the top and bottom of the RAM slot cavity in the rollcage. They probably got lose during servicing.

The middle part of the clips fit into the rollcage and the outer wings contact the keyboard/palm rest.

gradas
Posts: 21
Joined: Sat Sep 16, 2006 6:18 pm
Location: Omaha NE

#4 Post by gradas » Thu Jan 24, 2008 9:05 pm

It was a loose screw right under where it had the problem. Something was not aligned and I could not tighten it enough (did not want to use a lot of force). I unscrewed all keyboard screws reseated keyboard and palmrest and then it worked fine.

Brad, thanks for pointing me in the right direction.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 9 guests