F12 not working

Performance, hardware, software, general buying and gaming discussion..
Post Reply
Message
Author
Paul Unger
Senior Member
Senior Member
Posts: 551
Joined: Mon Jun 14, 2004 8:18 am
Location: Solomon Islands / Canada

F12 not working

#1 Post by Paul Unger » Wed Feb 13, 2008 11:22 pm

Is there any place to check / confirm / reset the key mappings for the Fn keys? Mine seem to have gone wonky . . . I first noticed that Fn+F12 (Hibernate) didn't work (but Fn+F4 (Standby) does). F3 (Power), F5 (Wireless), F8 (Touchpad?), F9 (?) don't work. F4 (Standby), F7 (Presentation Director), PgUp (thinklight), Home / End (Bright / Dim) do work. Do some of these depend on a service? Could I have it disabled? Something went whacky with "Sticky Keys" yesterday (I hate that utility :evil: ; CapsLock off, all my typing was UPPERCASE / CapsLock on, all my typing was lowercase . . . ; completely daft!) Could this be part of the problem?
T430s 2352-CTO 2.60GHz (i5), 4.0GB, 500GB (7200rpm), 14" HD+, W7 (64)
X201 3249-CTO 2.53GHz (i5), 8.0GB, 500GB (7200rpm), 12" WXGA, W7 (64)
T42 2373-3UU 1.7GHz (PM), 2.0GB, 80GB, 14" SXGA+, XP SP3 / Ubuntu 9.04
T42 2373-4TU 1.7GHz (PM), 1.5GB, 60GB, 14" XGA, XP SP3

ryengineer
Moderator Emeritus
Moderator Emeritus
Posts: 4393
Joined: Wed Sep 20, 2006 9:29 pm
Location: L.A. (home town) CA, Toronto ON.

#2 Post by ryengineer » Thu Feb 14, 2008 4:19 am

Paul Unger wrote:snip...Could I have it disabled?....snip
Likely if you've been tweaking around with your OS which you don't seem to mention.

Reinstall hotkey drivers, ACPI Power Management drivers, display drivers. (Assuming you've Windows XP).

For Windows Vista reinstall the following:

1. Lenovo System Interface driver.
2. ACPI Power Management.
3. Display driver. (from lenovo)
4. Hotekey utility.

Add Presentation director to the list too.
"I've come a long, long way," she said, "and I will go as far,
With the man who takes me from my horse, and leads me to a bar."
The man who took her off her steed, and stood her to a beer,
Were a bleary-eyed Surveyor and a DRUNKEN ENGINEER.

Paul Unger
Senior Member
Senior Member
Posts: 551
Joined: Mon Jun 14, 2004 8:18 am
Location: Solomon Islands / Canada

#3 Post by Paul Unger » Wed Feb 20, 2008 1:44 pm

I did play with some "Services". :roll: I had set ThinkPad PM Service to "Manual", thinking (incorrectly it seems) that if it was needed it would start. It didn't. So I've set it back to "Automatic" and F12 works. F5, however, still doesn't . . . Oh well, at least I can hibernate!

[Note to self: learn what a service does before changing its properties. :idea: ]
T430s 2352-CTO 2.60GHz (i5), 4.0GB, 500GB (7200rpm), 14" HD+, W7 (64)
X201 3249-CTO 2.53GHz (i5), 8.0GB, 500GB (7200rpm), 12" WXGA, W7 (64)
T42 2373-3UU 1.7GHz (PM), 2.0GB, 80GB, 14" SXGA+, XP SP3 / Ubuntu 9.04
T42 2373-4TU 1.7GHz (PM), 1.5GB, 60GB, 14" XGA, XP SP3

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad - General HARDWARE/SOFTWARE questions”

Who is online

Users browsing this forum: No registered users and 11 guests