can't access the bios :S

Older ThinkPads.. from the 600, the 7xx, the iSeries, 300, 500, the Transnote and, of course, the 701
Post Reply
Message
Author
bigmind69
Posts: 5
Joined: Thu Feb 21, 2008 7:21 pm
Location: Beirut,Lebanon

can't access the bios :S

#1 Post by bigmind69 » Thu Mar 06, 2008 7:17 pm

2day i get a new battery and before i put it i measure it and it was 3.30 volt because its new soo i try to put it . then i power the laptop on first of all it view to me the codes 0161 and 0173 and to the blue screen that have a picture with error soo i put ok and i add the date . soo i put ok then nothing happen . i try to press ok another time it didn't press i can play with mouse but i wherever i press its doesn't made any action :S soo any solution 4 that ???
Mas

rkawakami
Admin
Admin
Posts: 10053
Joined: Sun Jun 04, 2006 1:26 am
Location: San Jose, CA 95120 USA
Contact:

#2 Post by rkawakami » Thu Mar 06, 2008 7:46 pm

You should be able to move the cursor over the OK button and press the left Trackpoint button. If that doesn't work, then try pressing the arrow keys and/or tab key until the OK button is highlighted. Then press the Enter key. If those things don't work, then you may have some problems with the system. Exactly what model do you have?
Ray Kawakami
X22 X24 X31 X41 X41T X60 X60s X61 X61s X200 X200s X300 X301 Z60m Z61t Z61p 560 560Z 600 600E 600X T21 T22 T23 T41 T60p T410 T420 T520 W500 W520 R50 A21p A22p A31 A31p
NOTE: All links to PC-Doctor software hosted by me are dead. Files removed 8/28/12 by manufacturer's demand.

bigmind69
Posts: 5
Joined: Thu Feb 21, 2008 7:21 pm
Location: Beirut,Lebanon

#3 Post by bigmind69 » Fri Mar 07, 2008 8:36 pm

first of all thanks rkawakami for replying
the model of my laptop is 600E 2645 -4eu exctly wht happen is, when i power it on , it startup by checking the memory then the two numbers has been veiw , then the blue screen came in the middle there is a word error and there is cancel and ok , i choose ok the first time i change the date when i put the battery then when i change the date and put ok , there is nothing get i can move the scorll but i can't press anything , i try to power it off and then on the screen and the codes still the same nothing have been change the just the date and time is still stable as i put it
Mas

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad Legacy Hardware”

Who is online

Users browsing this forum: No registered users and 2 guests