Question T60p with Kalyway's 10.5.2

Message

strohscw · #1 Post by **strohscw** » Sat Mar 08, 2008 2:08 pm

hi,

worked it out to install the Kalyway´s 10.5.2 on my T60p (1007vef).

Still i have the following problems:

1.) Display works with 1024x768 instead 1400x1050
2.) No WLAN
3.) No sound

I would really appreciate any help.
I am new to OSX, so please if You can help me, I need detailed installation infos
Thanks to the experts!!

andrey · #2 Post by **andrey** » Sun Mar 09, 2008 2:19 am

actually, you can get all of your issues working if you just read a few posts here.

strohscw · #3 Post by **strohscw** » Sun Mar 09, 2008 6:47 am

well I did a lot of reading, searching and trying, but I didn´t find real working solutions.
Especially the video "solutions" I found I have no possibility to get the 1400x1050, it displays 1680x1050 in two sections, no selection for my resolution availlable.

Help still needed.

andrey · #4 Post by **andrey** » Sun Mar 09, 2008 12:55 pm

strohscw wrote:well I did a lot of reading, searching and trying, but I didn´t find real working solutions.
Especially the video "solutions" I found I have no possibility to get the 1400x1050, it displays 1680x1050 in two sections, no selection for my resolution availlable.

Help still needed.

There is a solution. I posted files in that thread to get 1400x1050 on FireGL 5250 working.

-- Andrey

strohscw · #5 Post by **strohscw** » Mon Mar 10, 2008 9:32 am

hi Andrey,

thanks I used Your Kext files and they work but with one problem.
When I start it normally than the menues are black letter on black background. Only when I start with -x optin then I have the standard menue (black letters on white background)

Any suggestion?

Thanks

andrey · #6 Post by **andrey** » Mon Mar 10, 2008 11:07 am

strohscw wrote:hi Andrey,

thanks I used Your Kext files and they work but with one problem.
When I start it normally than the menues are black letter on black background. Only when I start with -x optin then I have the standard menue (black letters on white background)

Any suggestion?

Thanks

Did you install "Leopard Graphics Update"? In my experience that was breaking the menus. I have not found a solution to the updated drivers yet, so I'm staying on 10.5.2 w/o Leopard Graphics Update.

Alternatively, you can install 10.5 >> upgrade to 10.5.1 >> install graphic drivers >> upgrade to Kalyway 10.5.2 if you haven't installed Leopard Graphics Update to have FireGL 5250 working on 10.5.2

strohscw · #7 Post by **strohscw** » Mon Mar 10, 2008 12:27 pm

Yes I installed as suggeseted in some posts the "Leopard Graphics Update".
So I have to reinstall the complete system without this update?

thanks

strohscw · #8 Post by **strohscw** » Tue Mar 11, 2008 1:50 am

hello andrey,

You were right, without installing the apple graphic update the driver work!

thanks for Your support!

Question T60p with Kalyway's 10.5.2

Question T60p with Kalyway's 10.5.2

Who is online