Big favour from someone with a WUXGA display, please?

[noetus]

I have screwed up the settings for my display, which is an LG Philips LP154WU1. The WUXGA displays (1920x1200) are either made by LG or Samsung in the T61, and I have the LG.

I am hoping some kind soul with the LG LP154WU1 display in their T61p (not the Samsung) might download powerstrip and install it briefly enough to get the display settings I need. The program is free, and you can safely uninstall it afterwards.

Once it's installed, and you've rebooted, right click on the tray/notification area icon, and select Display profiles > Configure and then select "Advanced timing options". The values I need are under "Horizontal geometry" and "Vertical geometry" - just the values in Hz, pixels, and lines. So, under "Horizontal geometry": Scan rate, Active pixels (should be 1920), Front porch, Sync width, Back porch, Total. And under "Vertical geometry": Refresh rate, Active, Front porch, Sync width, Back porch, and Total. I don't need any of the microseconds values.

Also, I need to know which boxes are checking on the left hand side under "Synchronization", in particular whether "Composite sync" is or not. Also, if the "Horizontal" and "Vertical" are + or -.

After that, you can uninstall the program, and everything will be as it was.

I'd really appreciate it!

[lithium726]

Why don't you just go into safe mode (so the driver isn't loaded) and uninstall it so whatever settings you forced are erased?