problem:
powering on all i get is the thinkpad screen with "163264 MB OK" and after a few seconds some low volume, low pitch rapid fire ticking from the speakers for a second or less. it stays stuck on that screen and i cannot power up into bios mode either.
by removing and replacing the cmos batt i get error codes and the time/date screen but once i set it and exit i get the same problem.
have tried without the HDD and with the HDD from my T30 with the same results.
background:
a friend gave me this machine a few days ago and said it's dead and that before it died he sometimes had to "spank" it to get it working....by dead he meant that all it would do when powering up is show a "real scary error screen"
i powered it up, got the fan and cmos errors and after changing out the battery it would boot and run just fine. powered it up at least a dozen times and it never needed a spanking.
so i took it apart to clean out the dust and to paint the keyboard bezel. now it don't work.
anyone have any idea what i could have messed up while in there? why it needed spanking and if there is a component that commonly comes loose on these machines?
dave
600, no boot and no bios
-
tfflivemb2
- Moderator1

- Posts: 5532
- Joined: Thu Sep 01, 2005 1:17 pm
- Location: Wisconsin
- Contact:
thank you!
yanked the ram and it booted just fine.
put the ram in the front slot and got a 19153 error.
put ram back into rear slot and now it boots just fine and shows a full 160MB of ram.
ram is NEC MC-4516CB64KS-A10B this is 128MB on a single stick with 4 chips per side.
is the problem you've seen something to do with the slots coming loose like on a T30? if so this would explain the need to "spank" the machine once in a while and would be an easy fix by reflowing the solder pads. hopefully this is the case and it's not something more sinister.
dave
yanked the ram and it booted just fine.
put the ram in the front slot and got a 19153 error.
put ram back into rear slot and now it boots just fine and shows a full 160MB of ram.
ram is NEC MC-4516CB64KS-A10B this is 128MB on a single stick with 4 chips per side.
is the problem you've seen something to do with the slots coming loose like on a T30? if so this would explain the need to "spank" the machine once in a while and would be an easy fix by reflowing the solder pads. hopefully this is the case and it's not something more sinister.
dave
-
- Similar Topics
- Replies
- Views
- Last post
-
-
How can I tell if my T60 running BIOS 2.27 already has the Zender SLIC2.1 no-whitelist BIOS?
by Muse » Fri Apr 21, 2017 2:42 pm » in ThinkPad T6x Series - 4 Replies
- 820 Views
-
Last post by axur-delmeria
Sun Apr 23, 2017 11:47 am
-
-
-
safe to flash T500 7VET94WW bios with whitelist bios for 6FET92WW
by TPFanatic » Wed Apr 26, 2017 7:35 pm » in ThinkPad T400/410/420 and T500/510/520 Series - 4 Replies
- 765 Views
-
Last post by TPFanatic
Thu Apr 27, 2017 6:28 pm
-
-
-
FS: [Free] 600/600E/600X/T20/T21 parts & working + accessories/ram (NJ)
by nickpapag » Wed Jan 04, 2017 12:33 pm » in Marketplace - Forum Members only - 7 Replies
- 964 Views
-
Last post by Raidriar
Sat Apr 01, 2017 12:06 am
-
-
-
FS: GTX 1060 MXM version, $600 free shipping
by RMSMajestic » Fri Jan 13, 2017 2:03 am » in Marketplace - Forum Members only - 0 Replies
- 302 Views
-
Last post by RMSMajestic
Fri Jan 13, 2017 2:03 am
-
Who is online
Users browsing this forum: No registered users and 2 guests



