Transnote will not see USB CD-ROM

Message

hammerheadtim · #1 Post by **hammerheadtim** » Thu Apr 10, 2008 10:43 am

I have a few Transnotes that I received without hard drives, I can't get the Transnote to boot from a USB CD-ROM, I have enabled the USB and put the removable devices in the first place in the boot startup sequence , what am I doing wrong?
Thanks
Tim

ajkula66 · #2 Post by **ajkula66** » Thu Apr 10, 2008 10:57 am

Is your USB CD-ROM recognized in BIOS?

hammerheadtim · #3 Post by **hammerheadtim** » Thu Apr 10, 2008 1:51 pm

There is a CD in the bios boot menu but it is there even if I unplug the USB cable

ajkula66 · #4 Post by **ajkula66** » Thu Apr 10, 2008 2:00 pm

That's not what I was referring to...

Switch the "boot mode" in BIOS to "Diagnostics" and see whether your USB CD-ROM will be recognized, which I doubt. This is under "startup" section in BIOS.

Good luck.

hammerheadtim · #5 Post by **hammerheadtim** » Thu Apr 10, 2008 2:38 pm

No it is not there.

ajkula66 · #6 Post by **ajkula66** » Thu Apr 10, 2008 6:19 pm

That's what I figured would be the case. You'll have to get one of those old IBM PCMCIA external CD-ROMs and start from there...model is either 1968 or 1969, they pop up on eBay quite often, at least they used to...

Good luck.

#7 Post by **rkawakami** » Thu Apr 10, 2008 6:49 pm

1969-010.

hammerheadtim · #8 Post by **hammerheadtim** » Fri Apr 11, 2008 11:57 am

I found a old Port NW24XCD PCMCIA in stock but it does not see it, I did get it to load PC DOC with a USB floppy, guess I will try and find one of the old IBM ones that you talked about, thanks for your help

Transnote will not see USB CD-ROM

Transnote will not see USB CD-ROM

Who is online