Is the 390x limited to low density memory?

Older ThinkPads.. from the 600, the 7xx, the iSeries, 300, 500, the Transnote and, of course, the 701
Post Reply
Message
Author
fodder650
Posts: 2
Joined: Wed Mar 26, 2008 2:22 pm
Location: Womelsdorf, Pa

Is the 390x limited to low density memory?

#1 Post by fodder650 » Thu Apr 10, 2008 8:18 pm

Currently running a PIII 450 Thinkpad 390x. Bought 2 256MB pieces of memory and couldn't get them to work.

After a lot of experimentation and google searching. It appears I am limited to low density memory for a 390x. Is this the case?
Top
rkawakami
Admin
Admin
Posts: 10053
Joined: Sun Jun 04, 2006 1:26 am
Location: San Jose, CA 95120 USA
Contact:
Contact rkawakami

#2 Post by rkawakami » Thu Apr 10, 2008 8:57 pm

IBM documentation says the 390X uses PC100 memory and the Intel 440BX chipset; same as what's in a 600X. So I would say "yes, it does need low density memory". 256MB modules will need to have 16 chips on them (8 per side). Otherwise known as 33L3069 or 33L3070 FRUs.
Ray Kawakami
X22 X24 X31 X41 X41T X60 X60s X61 X61s X200 X200s X300 X301 Z60m Z61t Z61p 560 560Z 600 600E 600X T21 T22 T23 T41 T60p T410 T420 T520 W500 W520 R50 A21p A22p A31 A31p
NOTE: All links to PC-Doctor software hosted by me are dead. Files removed 8/28/12 by manufacturer's demand.
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad Legacy Hardware”

Who is online

Users browsing this forum: No registered users and 3 guests