SOLD:760xl , 1171 and the 2621

Use this Forum for the ThinkPad hardware you have for sale or want to buy.
Sorry, no commercial sellers allowed here without asking Bill
Locked
Message
Author
northcarolinagal
Freshman Member
Posts: 77
Joined: Fri May 16, 2008 7:08 am
Location: newland nc

SOLD:760xl , 1171 and the 2621

#1 Post by northcarolinagal » Tue May 20, 2008 7:14 am

mods can you close this please thanks


hi guys

I am new to the forums and have three older think pads for sale. One is a 760 xl everything is perfect on it but it is missing the hard drive and has a issue when it turns on. Sounds like something is not connecting right in it. It even has its power supply. 760XL is sold

The second one is a I series type 2621. it is complete except for the ram and it looks to have a backlight problem. Other than that it boots. Asking $40 dollars for it plus shipping.

The last one is also a I series but it is a 1171. it is mostly good for parts. Someone has dropped the laptop so the case is shattered. Screen is perfect and battery holds a charge. Still has alot of parts left to it or if someone's died and they need a good motherboards and parts this would be a good one. Asking $30 dollars for it plus shipping. Our zip code is 28657 so you can check on shipping.



Thanks and hope I have done this right.

Laurie
Last edited by northcarolinagal on Tue Jun 17, 2008 6:38 pm, edited 2 times in total.

northcarolinagal
Freshman Member
Posts: 77
Joined: Fri May 16, 2008 7:08 am
Location: newland nc

#2 Post by northcarolinagal » Thu May 22, 2008 6:08 pm

make offers on all need them up and out of the house. hubby getting tired of all my puter parts especially since two new ones just came into the house. plus a type 2611 coming sometime this week. the fujitsu I have decided to keep so all others are still available.

thanks

Kyocera
Moderator Emeritus
Moderator Emeritus
Posts: 4826
Joined: Wed Aug 10, 2005 8:00 pm
Location: North Carolina, ...in my mind I'm going to Carolina.....
Contact:

#3 Post by Kyocera » Thu May 22, 2008 6:17 pm

northcarolinagal wrote:Thanks and hope I have done this right.
Looks OK to me. I'm sure you'll be getting some offers. Takes a little time sometimes.

northcarolinagal
Freshman Member
Posts: 77
Joined: Fri May 16, 2008 7:08 am
Location: newland nc

#4 Post by northcarolinagal » Mon Jun 02, 2008 5:25 am

bump plus i found out the I series laptop is a 700 mhz boots to bios and cmos is good on it. only thing wrong is it needs a new bottom case. if someone had one they would have a good machine I truly believe I just cant find one to put it in or i would keep it.

wizzard0003
Posts: 16
Joined: Sun Mar 16, 2008 5:39 pm
Location: Aberdeen, WA USA

#5 Post by wizzard0003 » Sun Jun 08, 2008 7:53 pm

YGPM... :wink:

\\//_
Laptop: 760XL, 9547-U9C, Windows 98SE, 166MHz
2.1GB, 104MB RAM, 8xCDROM, Ext. Floppy
BIOS Version - Date: HZET73WW - 12/09/99

Desktop: ASRock 939DUAL, AMD 6400+
2x1GB DDR2-800, Radeon X1950PRO AGP...

My Heatware

northcarolinagal
Freshman Member
Posts: 77
Joined: Fri May 16, 2008 7:08 am
Location: newland nc

#6 Post by northcarolinagal » Sun Jun 08, 2008 8:35 pm

pm answered

northcarolinagal
Freshman Member
Posts: 77
Joined: Fri May 16, 2008 7:08 am
Location: newland nc

#7 Post by northcarolinagal » Sun Jun 08, 2008 8:36 pm

pm answered

northcarolinagal
Freshman Member
Posts: 77
Joined: Fri May 16, 2008 7:08 am
Location: newland nc

#8 Post by northcarolinagal » Wed Jun 11, 2008 5:46 pm

bump the 1171 does work boots into bios keyboard works great too and screen is good. other one is mostly for parts

wizzard0003
Posts: 16
Joined: Sun Mar 16, 2008 5:39 pm
Location: Aberdeen, WA USA

#9 Post by wizzard0003 » Mon Jun 16, 2008 9:44 pm

Recieved 760XL today...

Everything as described / Super Fast Shipping...!

Thanks, northcarolinagal... 8)

Feedback left for you at Heatware... :wink:

\\//_
Laptop: 760XL, 9547-U9C, Windows 98SE, 166MHz
2.1GB, 104MB RAM, 8xCDROM, Ext. Floppy
BIOS Version - Date: HZET73WW - 12/09/99

Desktop: ASRock 939DUAL, AMD 6400+
2x1GB DDR2-800, Radeon X1950PRO AGP...

My Heatware

northcarolinagal
Freshman Member
Posts: 77
Joined: Fri May 16, 2008 7:08 am
Location: newland nc

#10 Post by northcarolinagal » Mon Jun 16, 2008 9:48 pm

glad you got it will leave feedback at heatwave and here too. thanks again

ryengineer
Moderator Emeritus
Moderator Emeritus
Posts: 4393
Joined: Wed Sep 20, 2006 9:29 pm
Location: L.A. (home town) CA, Toronto ON.

#11 Post by ryengineer » Tue Jun 17, 2008 6:48 pm

Please put "Sold" in the title subject when everything gets sold out, it makes life easier for us moderators, thanks and good luck with your sale.
"I've come a long, long way," she said, "and I will go as far,
With the man who takes me from my horse, and leads me to a bar."
The man who took her off her steed, and stood her to a beer,
Were a bleary-eyed Surveyor and a DRUNKEN ENGINEER.

Locked
  • Similar Topics
    Replies
    Views
    Last post

Return to “Marketplace - Forum Members only”

Who is online

Users browsing this forum: No registered users and 2 guests