Interchangable Motherboards for T41p

T4x series specific matters only
Post Reply
Message
Author
MurrayShafiroff
Posts: 35
Joined: Sat Apr 26, 2008 5:18 pm
Location: Sharon, MA

Interchangable Motherboards for T41p

#1 Post by MurrayShafiroff » Thu May 22, 2008 6:15 am

Are the system boards (93P3313, 39T5495, et all) swappable from the 15" models to the 14.1" models?

Thanks in advance guys!

Murray Shafiroff
MFS
Top
Brad
**SENIOR** Member
**SENIOR** Member
Posts: 1847
Joined: Tue Mar 29, 2005 12:41 am
Location: Long Island New York

#2 Post by Brad » Thu May 22, 2008 7:25 am

From what I have seen all the boards will fit. Just the type of memory (T40/1/2 DDR, T43 DDR2) and GPU. The FSB is 400mhz on the T40/1/2 and on the T43 it is 533mhz. CPU's should work but may slow down based on the FSB speed.

Brad
Long Island New York
T43p 2669-Q1U, A22p's UTU A21p HXU
Transnote, 770's 8AU, 600, 701CS, 755CD
Top
sjthinkpader
Senior ThinkPadder
Senior ThinkPadder
Posts: 2908
Joined: Tue Jan 22, 2008 8:29 pm
Location: San Jose, CA

#3 Post by sjthinkpader » Thu May 22, 2008 9:33 am

The T43s use a different PCMCIA/Expresscard cage. The plastic spacer is slightly different from T40/41/42 as well.
T60p 2623-DDU/UXGA IPS/ATI V5200
T60 2623-DCU/SXGA+ IPS/ATI X1400
T43p 2668-H8U/UXGA IPS/ATI V3200
R50p 1832-NU1/UXGA IPS/ATI FireGL T2
X61t 7762-B6U dual touch IPS/64GB SSD
X32 2673-BU6/32GB SSD
755CDV 9545-GBK Transmissive Projection LCD
Top
Brad
**SENIOR** Member
**SENIOR** Member
Posts: 1847
Joined: Tue Mar 29, 2005 12:41 am
Location: Long Island New York

#4 Post by Brad » Thu May 22, 2008 10:08 am

Correct. I forgot about that.

Thanks

Brad
Long Island New York
T43p 2669-Q1U, A22p's UTU A21p HXU
Transnote, 770's 8AU, 600, 701CS, 755CD
Top
underclocker
moderator
moderator
Posts: 4016
Joined: Wed Mar 23, 2005 3:52 pm
Location: Wash., D.C.

#5 Post by underclocker » Fri May 23, 2008 5:28 pm

Will the dual PCMCIA cage from the T40/T41/T42's work in a T43 mobo? I always wondered if the connector was the same and if it would be detected properly. Conversely, could you use the PCMCIA/Express cage in an earlier T4x?

Has anyone tried either? The last time I had both machines on hand I forgot to try it.
T510, i7-620m, NVidia, HD+, 8GB, 180GB Intel Pro 1500 SSD, Webcam, BT, FPR Home
T400s, C2D SP9400, Intel 4500MHD, WXGA+, 8GB, 160GB Intel X18-M G2 SSD, Webcam, BT, FPR Travel
Edge 14 Core i5 | Edge 15 Core i3 | Edge 15 Athlon II X2| Edge 15 Phenom II X4
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T4x Series”

Who is online

Users browsing this forum: No registered users and 13 guests