Configuring a T42 2378DXU with a high capacity battery probl
Configuring a T42 2378DXU with a high capacity battery probl
Is there a way to upgrade to the 9cell (High capacity) on this one? The tabook says the upgrade is optional but I can't find out how to do it in the configuration at IBM's site. Do I have to pay for the standard battery and a high capacity one?
i've had the same kind problem as you:
i wanted a T42, 2373-CVU which comes with a 6 cell but with a 9 cell instead.
When I spoke to Bill, he mentioned he would be able to swap a 6 cell for a 9 cell (and of course pay for the difference, $20). Hopefully he won't mind me mentioning that some users usually want a different battery. So someone probably ordered a thinkpad with a 9 cell but wanted a 6 cell.
Currently ordered through Bill (waiting for confirmation of payment).
Cannot wait till i get my first thinkpad!
Ken
i wanted a T42, 2373-CVU which comes with a 6 cell but with a 9 cell instead.
When I spoke to Bill, he mentioned he would be able to swap a 6 cell for a 9 cell (and of course pay for the difference, $20). Hopefully he won't mind me mentioning that some users usually want a different battery. So someone probably ordered a thinkpad with a 9 cell but wanted a 6 cell.
Currently ordered through Bill (waiting for confirmation of payment).
Cannot wait till i get my first thinkpad!
Ken
If this is your first T4x series laptop, you may want to consider keeping the 6-cell and buying the 9-cell separately. Although the 9-cell has 50% longer battery life, it's a very awkward piece.
Thinkpad X200s w/ Ultrabase
C2D SL9600 / 8GB / 160GB X25-M G2 / BD MULTI / 12.1" WXGA / INTEL 4500MHD / INTEL 5150 / BT / AT&T WWAN / W7
C2D SL9600 / 8GB / 160GB X25-M G2 / BD MULTI / 12.1" WXGA / INTEL 4500MHD / INTEL 5150 / BT / AT&T WWAN / W7
You can't just order it seperately, ie just add the part number to your cart?
http://www-132.ibm.com/webapp/wcs/store ... &storeId=1
Isn't that it? I guess you'd have to pay for both..
What's the difference between Li-Ion and Li-Polymer?
http://www-132.ibm.com/webapp/wcs/store ... &storeId=1
Isn't that it? I guess you'd have to pay for both..
What's the difference between Li-Ion and Li-Polymer?
T61 7658-CTO
T42 2378-FVU (RIP)
T42 2378-FVU (RIP)
That's it, but I don't want to pay for 2 batteries
Here's a 3 year old article about Li-poly vs Li-ion:
I guess it seems more feasible, knowing this, to me now that the ultrabay battery can last just as long as the normal one.
Here's a 3 year old article about Li-poly vs Li-ion:
andAdvantages
Very low profile — batteries that resemble the profile of a credit card are feasible.
Flexible form factor — manufacturers are not bound by standard cell formats. With high volume, any reasonable size can be produced economically.
Light weight – gelled rather than liquid electrolytes enable simplified packaging, in some cases eliminating the metal shell.
Improved safety — more resistant to overcharge; less chance for electrolyte leakage.
Limitations
Lower energy density and decreased cycle count compared to Li-ion — potential for improvements exist.
Expensive to manufacture — once mass-produced, the Li-ion polymer has the potential for lower cost. Reduced control circuit offsets higher manufacturing costs.
http://www.buchmann.ca/Article6-Page1.aspThe Li-ion polymer offers little or no energy gain over conventional Li‑ion systems; neither do the slim profile Li-ion systems meet the cycle life of the rugged 18560 cell. The cost-to-energy ration increases as the cell size decreases in thickness. Cost increases in the multiple of three to four compared to the 18650 cell are common on exotic slim battery designs.
If space permitted, the 18650 cell offers the most economical choice, both in terms of energy per weight and longevity. Applications for this cell are mobile computing and video cameras. Slimming down means thinner batteries. This, in turn, will make the cost of the portable power more expensive.
I guess it seems more feasible, knowing this, to me now that the ultrabay battery can last just as long as the normal one.
Actually, it is Newegg that carries the 9-cell for $99 +free s/h. I didn't want to advertise for them on this forum but if it saves you a few bucks then there you go. The only Thinkpad stuff they carry is that 9-cell, the value nylon case, and the port replicator 2.
I think the best option for you, since they aren't going to let you upgrade to the 9-cell, is to just buy a 9-cell. Although IBM batteries are alot better than Dells, all notebook batteries inevitably die an expensive death. Having two isn't a bad idea.
I think the best option for you, since they aren't going to let you upgrade to the 9-cell, is to just buy a 9-cell. Although IBM batteries are alot better than Dells, all notebook batteries inevitably die an expensive death. Having two isn't a bad idea.
All batteries go bad by age. The reason why battery lifetimes are given by charges is because the assumption is the battery is going to be in use, so numbe of charges is the limiting factor. However, storing batteries, their life will decrease. (Also note that when you store li-ion/li-poly batteries, you shouldn't store them at full capacity or at near discharge but about 80% charge-- though they will slowly discharge over time (another characteristic of all batteries))tyipengr wrote:How do you know this? Whenever I've read electrical specifications for Li-Ion batteries their lifetimes have been represented by the average number of charges, not by age.Leon wrote:no, no, no.... batteries DO go bad on the shelf!!!! it is NOT good to buy in advance.
If you let the battery chill on your shelf for an extended period of time, store it at 40% charge, at as low a temperature as possible.
Do NOT leave it sitting for "too" long. Depending on temperature, your battery could lose 10-20% charge after 1 year of storage (of course, reduced temperature = reduced loss). If you store it at 100% charge, you will lose a lot more capacity. I think it goes something like this...store at 40% charge for 1 year at 0C--lose 2%. Store at 40% charge for 1 year at 60C--lose 25%. Just to give you an idea.
I believe that the longer you leave it sitting, the faster it deteriorates. This is due to some chemical reactions that take place inside the battery--the contents begin to oxidize over time, making them unable to store charge.
Do NOT leave it sitting for "too" long. Depending on temperature, your battery could lose 10-20% charge after 1 year of storage (of course, reduced temperature = reduced loss). If you store it at 100% charge, you will lose a lot more capacity. I think it goes something like this...store at 40% charge for 1 year at 0C--lose 2%. Store at 40% charge for 1 year at 60C--lose 25%. Just to give you an idea.
I believe that the longer you leave it sitting, the faster it deteriorates. This is due to some chemical reactions that take place inside the battery--the contents begin to oxidize over time, making them unable to store charge.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
T61 Battery Has Greater Remaining Capacity Than Design Capacity?
by olex126 » Mon Feb 20, 2017 3:15 pm » in Thinkpad - General HARDWARE/SOFTWARE questions - 5 Replies
- 1228 Views
-
Last post by olex126
Mon Feb 20, 2017 9:11 pm
-
-
-
Battery capacity charts - updated January 2017 (*PICS*)
by dr_st » Tue Jan 10, 2017 4:16 pm » in GENERAL ThinkPad News/Comments & Questions - 27 Replies
- 1924 Views
-
Last post by Puppy
Sun Jan 22, 2017 5:48 am
-
-
-
Brand New Oem X230 Battery Losing Full Charge Capacity Fast!
by TheMagicT410 » Sat Feb 11, 2017 12:58 pm » in ThinkPad X230 and later Series - 5 Replies
- 826 Views
-
Last post by TheMagicT410
Sat Feb 25, 2017 3:04 pm
-
-
-
Max HDD Capacity the x220t bios will recognize?
by Digitalhorizons » Sun Jan 15, 2017 3:59 am » in ThinkPad X200/201/220 and X300/301 Series - 1 Replies
- 683 Views
-
Last post by RealBlackStuff
Sun Jan 15, 2017 6:17 am
-
Who is online
Users browsing this forum: No registered users and 22 guests






